lucasfernandodev
(usa Debian)
Enviado em 09/12/2020 - 04:23h
Comprei meu computador bem recentemente e ele veio com windows 10, tava atualizando os drivers, o pc desligou e o win10 foi corrompido, não tinha como criar outro pen bootavel de win10 pois estava sem pc e resolvi instalar o debian. Depois de instalar o debian acontece frequentemente do meu computador congelar a tela e tudo para de funcionar. as vezes fica uns dias sem acontecer outras acontecem toda hora. Pelo dmesg acho que pode ser algo com a Bios ou ou algum firmware,
queria tentar achar uma solução para o problema sem ter que gravar bios, somente pelo linux, nãos sei se atualizar outra bios(pode dar errado) pode afetar a garantia pois se não conseguir tenho que ver com eles já que o pc é novo.
Configurações do pc:
PC BRX INTEL CORE I3-530
PROCESSADOR: INTEL CORE I3-530
PLACA MÃE: H55
MEMORIA 4GB DDR3
DISCO RIGIDO: HD 500GB
sudo dmesg
[ 0.000000] microcode: microcode updated early to revision 0x7, date = 2018-04-23
[ 0.000000] Linux version 4.19.0-12-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.152-1 (2020-10-18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=b111dafa-0b2e-4ca2-a64b-cdcfd0b7821c ro quiet intel_iommu=igfx_off
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b377ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3780000-0x00000000b378dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b378e000-0x00000000b37cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b37d0000-0x00000000b37dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b37ed000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Qwerty H55/H55, BIOS 080015 07/10/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2926.168 MHz processor
[ 0.001911] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001913] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001919] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.001923] MTRR default type: uncachable
[ 0.001924] MTRR fixed ranges enabled:
[ 0.001925] 00000-9FFFF write-back
[ 0.001926] A0000-BFFFF uncachable
[ 0.001927] C0000-CFFFF write-protect
[ 0.001927] D0000-DFFFF uncachable
[ 0.001928] E0000-E3FFF write-protect
[ 0.001929] E4000-E7FFF write-through
[ 0.001930] E8000-EBFFF write-protect
[ 0.001930] EC000-EFFFF write-through
[ 0.001931] F0000-FFFFF write-protect
[ 0.001932] MTRR variable ranges enabled:
[ 0.001933] 0 base 13C000000 mask FFC000000 uncachable
[ 0.001934] 1 base 000000000 mask F00000000 write-back
[ 0.001935] 2 base 100000000 mask FC0000000 write-back
[ 0.001936] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.001937] 4 base 0B4000000 mask FFC000000 uncachable
[ 0.001938] 5 base 0B8000000 mask FF8000000 uncachable
[ 0.001938] 6 disabled
[ 0.001939] 7 disabled
[ 0.002616] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002770] e820: update [mem 0xb4000000-0xffffffff] usable ==> reserved
[ 0.002776] last_pfn = 0xb3780 max_arch_pfn = 0x400000000
[ 0.012532] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.021045] RAMDISK: [mem 0x31d4b000-0x34e9cfff]
[ 0.021054] ACPI: Early table checksum verification disabled
[ 0.021150] ACPI: RSDP 0x00000000000F98F0 000014 (v00 ACPIAM)
[ 0.021154] ACPI: RSDT 0x00000000B3780000 000040 (v01 071020 RSDT0947 20200710 MSFT 00000097)
[ 0.021159] ACPI: FACP 0x00000000B3780200 000084 (v01 071020 FACP0947 20200710 MSFT 00000097)
[ 0.021165] ACPI: DSDT 0x00000000B3780460 005D7B (v01 BRH5R BRH5R308 00000308 INTL 20051117)
[ 0.021169] ACPI: FACS 0x00000000B378E000 000040
[ 0.021172] ACPI: APIC 0x00000000B3780390 00008C (v01 071020 APIC0947 20200710 MSFT 00000097)
[ 0.021175] ACPI: MCFG 0x00000000B3780420 00003C (v01 071020 OEMMCFG 20200710 MSFT 00000097)
[ 0.021179] ACPI: OEMB 0x00000000B378E040 000072 (v01 071020 OEMB0947 20200710 MSFT 00000097)
[ 0.021182] ACPI: GSCI 0x00000000B378E0C0 002024 (v01 071020 GMCHSCI 20200710 MSFT 00000097)
[ 0.021186] ACPI: DMAR 0x00000000B37900F0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.021189] ACPI: SSDT 0x00000000B3791470 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.021199] ACPI: Local APIC address 0xfee00000
[ 0.021304] No NUMA configuration found
[ 0.021305] Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
[ 0.021310] NODE_DATA(0) allocated [mem 0x13bff8000-0x13bffcfff]
[ 0.021341] Zone ranges:
[ 0.021342] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.021343] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.021344] Normal [mem 0x0000000100000000-0x000000013bffffff]
[ 0.021345] Device empty
[ 0.021346] Movable zone start for each node
[ 0.021347] Early memory node ranges
[ 0.021347] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.021348] node 0: [mem 0x0000000000100000-0x00000000b377ffff]
[ 0.021349] node 0: [mem 0x0000000100000000-0x000000013bffffff]
[ 0.021982] Zeroed struct page in unavailable ranges: 35043 pages
[ 0.021983] Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff]
[ 0.021984] On node 0 totalpages: 980765
[ 0.021985] DMA zone: 64 pages used for memmap
[ 0.021986] DMA zone: 21 pages reserved
[ 0.021987] DMA zone: 3997 pages, LIFO batch:0
[ 0.022098] DMA32 zone: 11422 pages used for memmap
[ 0.022099] DMA32 zone: 731008 pages, LIFO batch:63
[ 0.044233] Normal zone: 3840 pages used for memmap
[ 0.044236] Normal zone: 245760 pages, LIFO batch:63
[ 0.050694] Reserving Intel graphics memory at [mem 0xb8000000-0xbfffffff]
[ 0.050815] ACPI: PM-Timer IO Port: 0x808
[ 0.050818] ACPI: Local APIC address 0xfee00000
[ 0.050837] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.050839] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.050841] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.050843] ACPI: IRQ0 used by override.
[ 0.050844] ACPI: IRQ9 used by override.
[ 0.050846] Using ACPI (MADT) for SMP configuration information
[ 0.050849] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.050867] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.050869] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.050870] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.050870] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.050871] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.050872] PM: Registered nosave memory: [mem 0xb3780000-0xb378dfff]
[ 0.050873] PM: Registered nosave memory: [mem 0xb378e000-0xb37cffff]
[ 0.050873] PM: Registered nosave memory: [mem 0xb37d0000-0xb37dffff]
[ 0.050874] PM: Registered nosave memory: [mem 0xb37e0000-0xb37ecfff]
[ 0.050875] PM: Registered nosave memory: [mem 0xb37ed000-0xbfffffff]
[ 0.050875] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.050876] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.050877] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.050877] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.050879] [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.050880] Booting paravirtualized kernel on bare hardware
[ 0.050884] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.256637] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[ 0.256645] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.257026] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
[ 0.257036] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
[ 0.257037] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.257061] Built 1 zonelists, mobility grouping on. Total pages: 965418
[ 0.257062] Policy zone: Normal
[ 0.257064] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=b111dafa-0b2e-4ca2-a64b-cdcfd0b7821c ro quiet intel_iommu=igfx_off
[ 0.257136] DMAR: Disable GFX device mapping
[ 0.265588] Calgary: detecting Calgary via BIOS EBDA area
[ 0.265591] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.265604] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address fed91000 returns all ones!
BIOS vendor: American Megatrends Inc.; Ver: 080015 ; Product Version: To Be Filled By O.E.M.
[ 0.281820] Memory: 3716796K/3923060K available (10252K kernel code, 1247K rwdata, 3312K rodata, 1596K init, 2264K bss, 206264K reserved, 0K cma-reserved)
[ 0.281952] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.281959] Kernel/User page tables isolation: enabled
[ 0.282004] ftrace: allocating 31917 entries in 125 pages
[ 0.299329] rcu: Hierarchical RCU implementation.
[ 0.299332] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.299333] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.303488] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.305784] Console: colour VGA+ 80x25
[ 0.305789] console [tty0] enabled
[ 0.305810] ACPI: Core revision 20180810
[ 0.305906] APIC: Switch to symmetric I/O mode setup
[ 0.305908] DMAR: Host address width 36
[ 0.305910] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.305915] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.305916] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.305924] DMAR: Failed to map dmar1
[ 0.305966] DMAR: Parse DMAR table failure.
[ 0.306519] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.325906] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2a2dd2d93eb, max_idle_ns: 440795234811 ns
[ 0.325921] Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.33 BogoMIPS (lpj=11704672)
[ 0.325923] pid_max: default: 32768 minimum: 301
[ 0.325959] Security Framework initialized
[ 0.325961] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.325982] AppArmor: AppArmor initialized
[ 0.326758] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.327169] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.327198] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.327215] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.327489] CPU0: Thermal monitoring enabled (TM1)
[ 0.327498] process: using mwait in idle threads
[ 0.327502] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.327503] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.327505] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.327506] Spectre V2 : Mitigation: Full generic retpoline
[ 0.327507] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.327508] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.327517] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.327518] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.327519] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.327544] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.327719] Freeing SMP alternatives memory: 24K
[ 0.440023] smpboot: CPU0: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz (family: 0x6, model: 0x25, stepping: 0x5)
[ 0.440151] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.440171] core: CPUID marked event: 'bus cycles' unavailable
[ 0.440174] ... version: 3
[ 0.440174] ... bit width: 48
[ 0.440175] ... generic registers: 4
[ 0.440176] ... value mask: 0000ffffffffffff
[ 0.440176] ... max period: 000000007fffffff
[ 0.440177] ... fixed-purpose events: 3
[ 0.440177] ... event mask: 000000070000000f
[ 0.440224] rcu: Hierarchical SRCU implementation.
[ 0.441099] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.441193] smp: Bringing up secondary CPUs ...
[ 0.441296] x86: Booting SMP configuration:
[ 0.441297] .... node #0, CPUs: #1 #2
[ 0.444261] MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.444261] #3
[ 0.445976] smp: Brought up 1 node, 4 CPUs
[ 0.445976] smpboot: Max logical packages: 2
[ 0.445976] smpboot: Total of 4 processors activated (23409.34 BogoMIPS)
[ 0.450202] devtmpfs: initialized
[ 0.450202] x86/mm: Memory block size: 128MB
[ 0.450351] PM: Registering ACPI NVS region [mem 0xb378e000-0xb37cffff] (270336 bytes)
[ 0.450351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.450351] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.450351] pinctrl core: initialized pinctrl subsystem
[ 0.450351] NET: Registered protocol family 16
[ 0.450351] audit: initializing netlink subsys (disabled)
[ 0.450351] audit: type=2000 audit(1607498081.144:1): state=initialized audit_enabled=0 res=1
[ 0.450351] cpuidle: using governor ladder
[ 0.450351] cpuidle: using governor menu
[ 0.450351] ACPI: bus type PCI registered
[ 0.450351] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.450351] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.450351] PCI: not using MMCONFIG
[ 0.450351] PCI: Using configuration type 1 for base access
[ 0.450626] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.450626] ACPI: Added _OSI(Module Device)
[ 0.450626] ACPI: Added _OSI(Processor Device)
[ 0.450626] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.450626] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.450626] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.450626] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.455186] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.456156] ACPI: Dynamic OEM Table Load:
[ 0.456163] ACPI: SSDT 0xFFFF99DE36FCC000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.456907] ACPI: Interpreter enabled
[ 0.456922] ACPI: (supports S0 S1 S4 S5)
[ 0.456923] ACPI: Using IOAPIC for interrupt routing
[ 0.456947] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.457706] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.457713] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.458167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.458321] ACPI: Enabled 13 GPEs in block 00 to 3F
[ 0.463411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.463416] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.463556] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.463684] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.463918] PCI host bridge to bus 0000:00
[ 0.463920] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.463921] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.463922] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.463923] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.463924] pci_bus 0000:00: root bus resource [mem 0xb4000000-0xdfffffff window]
[ 0.463925] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.463927] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.463933] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.464021] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
[ 0.464030] pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
[ 0.464035] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.464038] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.464143] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
[ 0.464184] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f]
[ 0.464286] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
[ 0.464326] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.464425] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
[ 0.464465] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f]
[ 0.464570] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
[ 0.464590] pci 0000:00:1a.7: reg 0x10: [mem 0xfbefa000-0xfbefa3ff]
[ 0.464665] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.464741] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.464761] pci 0000:00:1b.0: reg 0x10: [mem 0xfbef4000-0xfbef7fff 64bit]
[ 0.464830] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.464900] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.464976] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.465062] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
[ 0.465103] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.465201] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
[ 0.465241] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.465344] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
[ 0.465385] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.465493] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
[ 0.465512] pci 0000:00:1d.7: reg 0x10: [mem 0xfbef8000-0xfbef83ff]
[ 0.465587] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.465660] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.465777] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[ 0.465949] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.465968] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.465976] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.465984] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.465992] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.465999] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.466006] pci 0000:00:1f.2: reg 0x24: [mem 0xfbef2000-0xfbef27ff]
[ 0.466046] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.466118] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.466136] pci 0000:00:1f.3: reg 0x10: [mem 0xfbef0000-0xfbef00ff 64bit]
[ 0.466155] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.466286] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.466323] pci 0000:01:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.466353] pci 0000:01:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit]
[ 0.466373] pci 0000:01:00.0: reg 0x20: [mem 0xfaffc000-0xfaffffff 64bit pref]
[ 0.466490] pci 0000:01:00.0: supports D1 D2
[ 0.466491] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.466626] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.466628] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.466631] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.466636] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.466652] pci_bus 0000:02: extended config space not accessible
[ 0.466697] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.466706] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.466707] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.466708] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.466709] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.466710] pci 0000:00:1e.0: bridge window [mem 0xb4000000-0xdfffffff window] (subtractive decode)
[ 0.466711] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.467073] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.467118] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.467159] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.467200] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.467242] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.467284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.467327] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.467369] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.467475] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.467475] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.467475] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.467475] vgaarb: loaded
[ 0.467475] pps_core: LinuxPPS API ver. 1 registered
[ 0.467475] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.467475] PTP clock support registered
[ 0.467475] EDAC MC: Ver: 3.0.0
[ 0.467475] PCI: Using ACPI for IRQ routing
[ 0.472850] PCI: Discovered peer bus ff
[ 0.472850] PCI: root bus ff: using default resources
[ 0.472851] PCI: Probing PCI hardware (bus ff)
[ 0.472870] PCI host bridge to bus 0000:ff
[ 0.472872] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.472873] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.472874] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.472876] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.472880] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
[ 0.472916] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.472956] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.472990] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.473022] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.473054] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.473094] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.473096] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.473098] PCI: pci_cache_line_size set to 64 bytes
[ 0.473146] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.473148] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.473149] e820: reserve RAM buffer [mem 0xb3780000-0xb3ffffff]
[ 0.474133] clocksource: Switched to clocksource tsc-early
[ 0.483846] VFS: Disk quotas dquot_6.6.0
[ 0.483865] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.483976] AppArmor: AppArmor Filesystem Enabled
[ 0.483997] pnp: PnP ACPI init
[ 0.484095] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.484097] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.484098] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.484099] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.484105] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.484166] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.484294] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.484295] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ 0.484299] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484418] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.484420] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.484421] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.484423] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.484424] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.484425] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.484429] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484513] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.484517] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484602] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.484604] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.484607] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484659] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.484662] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484821] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.484823] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.484824] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.484825] system 00:07: [mem 0x00100000-0xb3ffffff] could not be reserved
[ 0.484827] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.484830] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.484931] pnp: PnP ACPI: found 8 devices
[ 0.490863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.490874] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.490877] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.490882] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.490885] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.490890] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.490900] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.490901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.490902] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.490903] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.490904] pci_bus 0000:00: resource 8 [mem 0xb4000000-0xdfffffff window]
[ 0.490905] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.490906] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.490907] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.490908] pci_bus 0000:01: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.490910] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.490911] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.490912] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.490913] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.490914] pci_bus 0000:02: resource 8 [mem 0xb4000000-0xdfffffff window]
[ 0.490915] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.490956] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.490957] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.490987] NET: Registered protocol family 2
[ 0.491142] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.491160] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.491219] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.491298] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.491339] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.491355] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.491409] NET: Registered protocol family 1
[ 0.491415] NET: Registered protocol family 44
[ 0.491437] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.491450] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.492507] PCI: CLS 32 bytes, default 64
[ 0.492544] Unpacking initramfs...
[ 1.201906] Freeing initrd memory: 50504K
[ 1.201971] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.201973] software IO TLB: mapped [mem 0xaf780000-0xb3780000] (64MB)
[ 1.202763] Initialise system trusted keyrings
[ 1.202774] Key type blacklist registered
[ 1.202804] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.203957] zbud: loaded
[ 1.381443] Key type asymmetric registered
[ 1.381445] Asymmetric key parser 'x509' registered
[ 1.381461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.381492] io scheduler noop registered
[ 1.381493] io scheduler deadline registered
[ 1.381523] io scheduler cfq registered (default)
[ 1.381523] io scheduler mq-deadline registered
[ 1.381832] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 1.381857] pciehp 0000:00:1c.0:pcie004: Slot #128 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.381955] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.381967] intel_idle: MWAIT substates: 0x1120
[ 1.381968] intel_idle: v0.4.1 model 0x25
[ 1.382087] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.382307] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.382666] hpet_acpi_add: no address or irqs in _CRS
[ 1.382680] Linux agpgart interface v0.103
[ 1.382779] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.382780] AMD IOMMUv2 functionality not available on this system
[ 1.383027] i8042: PNP: No PS/2 controller found.
[ 1.383027] i8042: Probing ports directly.
[ 3.148346] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 3.148347] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 3.149990] tsc: Refined TSC clocksource calibration: 2926.329 MHz
[ 3.149997] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2e6b4fb33, max_idle_ns: 440795272170 ns
[ 4.625307] clocksource: Switched to clocksource tsc
[ 4.625926] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.626039] mousedev: PS/2 mouse device common for all mice
[ 4.626537] rtc_cmos 00:01: RTC can wake from S4
[ 4.626696] rtc_cmos 00:01: registered as rtc0
[ 4.626711] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 4.626773] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.627146] NET: Registered protocol family 10
[ 4.633558] Segment Routing with IPv6
[ 4.633578] mip6: Mobile IPv6
[ 4.633580] NET: Registered protocol family 17
[ 4.633617] mpls_gso: MPLS GSO support
[ 4.633836] mce: Using 9 MCE banks
[ 4.633870] microcode: sig=0x20655, pf=0x2, revision=0x7
[ 4.633970] microcode: Microcode Update Driver: v2.2.
[ 4.633984] sched_clock: Marking stable (4631877701, 2088005)->(4656229024, -22263318)
[ 4.634178] registered taskstats version 1
[ 4.634179] Loading compiled-in X.509 certificates
[ 4.675087] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 4.675104] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 4.675122] zswap: loaded using pool lzo/zbud
[ 4.675195] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.675559] rtc_cmos 00:01: setting system clock to 2020-12-09 07:14:45 UTC (1607498085)
[ 4.676934] Freeing unused kernel image memory: 1596K
[ 4.702005] Write protecting the kernel read-only data: 16384k
[ 4.702696] Freeing unused kernel image memory: 2028K
[ 4.702955] Freeing unused kernel image memory: 784K
[ 4.712132] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.712134] x86/mm: Checking user space page tables
[ 4.720686] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.720687] Run /init as init process
[ 4.777518] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.777535] ACPI: Power Button [PWRB]
[ 4.777600] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.777624] ACPI: Power Button [PWRF]
[ 4.810275] ACPI: bus type USB registered
[ 4.810309] usbcore: registered new interface driver usbfs
[ 4.810319] usbcore: registered new interface driver hub
[ 4.810355] usbcore: registered new device driver usb
[ 4.822917] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20180810/utaddress-213)
[ 4.822924] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.822954] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.823281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.824419] ehci-pci: EHCI PCI platform driver
[ 4.824614] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.824621] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.824634] ehci-pci 0000:00:1a.7: debug port 2
[ 4.828600] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 4.828617] ehci-pci 0000:00:1a.7: irq 16, io mem 0xfbefa000
[ 4.835203] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.839523] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.841933] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.842036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 4.842038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.842039] usb usb1: Product: EHCI Host Controller
[ 4.842040] usb usb1: Manufacturer: Linux 4.19.0-12-amd64 ehci_hcd
[ 4.842042] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.842191] hub 1-0:1.0: USB hub found
[ 4.842201] hub 1-0:1.0: 6 ports detected
[ 4.842602] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.842610] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 4.842617] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 4.842645] uhci_hcd 0000:00:1a.0: irq 21, io base 0x0000d880
[ 4.842711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.842713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.842714] usb usb2: Product: UHCI Host Controller
[ 4.842716] usb usb2: Manufacturer: Linux 4.19.0-12-amd64 uhci_hcd
[ 4.842717] usb usb2: SerialNumber: 0000:00:1a.0
[ 4.842833] hub 2-0:1.0: USB hub found
[ 4.842840] hub 2-0:1.0: 2 ports detected
[ 4.842970] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.842975] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 4.842986] ehci-pci 0000:00:1d.7: debug port 2
[ 4.846943] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 4.846954] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbef8000
[ 4.859863] SCSI subsystem initialized
[ 4.861940] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.862015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 4.862017] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.862018] usb usb3: Product: EHCI Host Controller
[ 4.862020] usb usb3: Manufacturer: Linux 4.19.0-12-amd64 ehci_hcd
[ 4.862021] usb usb3: SerialNumber: 0000:00:1d.7
[ 4.862186] hub 3-0:1.0: USB hub found
[ 4.862196] hub 3-0:1.0: 8 ports detected
[ 4.862645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.862655] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.862662] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 4.862687] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000d800
[ 4.862769] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.862774] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.862776] usb usb4: Product: UHCI Host Controller
[ 4.862777] usb usb4: Manufacturer: Linux 4.19.0-12-amd64 uhci_hcd
[ 4.862778] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.862902] hub 4-0:1.0: USB hub found
[ 4.862913] hub 4-0:1.0: 2 ports detected
[ 4.863207] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.863212] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.863218] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 4.863248] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 4.863318] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.863320] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.863321] usb usb5: Product: UHCI Host Controller
[ 4.863323] usb usb5: Manufacturer: Linux 4.19.0-12-amd64 uhci_hcd
[ 4.863324] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.863443] hub 5-0:1.0: USB hub found
[ 4.863452] hub 5-0:1.0: 2 ports detected
[ 4.863665] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.863671] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.863676] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.863695] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d400
[ 4.863770] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.863771] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.863773] usb usb6: Product: UHCI Host Controller
[ 4.863774] usb usb6: Manufacturer: Linux 4.19.0-12-amd64 uhci_hcd
[ 4.863776] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.863889] hub 6-0:1.0: USB hub found
[ 4.864004] hub 6-0:1.0: 2 ports detected
[ 4.864218] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.864224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.864230] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.864250] uhci_hcd 0000:00:1d.1: irq 16, io base 0x0000d080
[ 4.864321] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.864323] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.864324] usb usb7: Product: UHCI Host Controller
[ 4.864326] usb usb7: Manufacturer: Linux 4.19.0-12-amd64 uhci_hcd
[ 4.864327] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.864441] hub 7-0:1.0: USB hub found
[ 4.864449] hub 7-0:1.0: 2 ports detected
[ 4.864659] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.864665] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.864671] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.864689] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 4.864759] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.864761] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.864763] usb usb8: Product: UHCI Host Controller
[ 4.864764] usb usb8: Manufacturer: Linux 4.19.0-12-amd64 uhci_hcd
[ 4.864766] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.864880] hub 8-0:1.0: USB hub found
[ 4.864889] hub 8-0:1.0: 2 ports detected
[ 4.868384] libphy: r8169: probed
[ 4.868589] r8169 0000:01:00.0 eth0: RTL8106e, 00:e0:4d:81:05:76, XID 44900000, IRQ 25
[ 4.879595] libata version 3.00 loaded.
[ 4.886127] ahci 0000:00:1f.2: version 3.0
[ 4.886359] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.888597] r8169 0000:01:00.0 ens128: renamed from eth0
[ 4.896472] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 4.896476] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 4.954694] scsi host0: ahci
[ 4.954973] scsi host1: ahci
[ 4.955104] scsi host2: ahci
[ 4.955229] scsi host3: ahci
[ 4.955349] scsi host4: ahci
[ 4.955467] scsi host5: ahci
[ 4.955545] ata1: SATA max UDMA/133 abar m2048@0xfbef2000 port 0xfbef2100 irq 26
[ 4.955547] ata2: SATA max UDMA/133 abar m2048@0xfbef2000 port 0xfbef2180 irq 26
[ 4.955549] ata3: SATA max UDMA/133 abar m2048@0xfbef2000 port 0xfbef2200 irq 26
[ 4.955551] ata4: SATA max UDMA/133 abar m2048@0xfbef2000 port 0xfbef2280 irq 26
[ 4.955553] ata5: SATA max UDMA/133 abar m2048@0xfbef2000 port 0xfbef2300 irq 26
[ 4.955554] ata6: SATA max UDMA/133 abar m2048@0xfbef2000 port 0xfbef2380 irq 26
[ 4.973008] pci 0000:00:00.0: Intel HD Graphics Chipset
[ 4.973027] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.973607] pci 0000:00:00.0: detected 131072K stolen memory
[ 4.973659] [drm] Replacing VGA console driver
[ 4.974094] Console: switching to colour dummy device 80x25
[ 4.975414] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.975415] [drm] Driver supports precise vblank timestamp query.
[ 4.975672] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.983078] [drm] RC6 disabled, disabling runtime PM support
[ 5.062657] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 5.088339] fbcon: inteldrmfb (fb0) is primary device
[ 5.173654] Console: switching to colour frame buffer device 170x48
[ 5.192751] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.269422] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.325991] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 5.515776] usb 2-1: New USB device found, idVendor=0000, idProduct=3825, bcdDevice= 1.00
[ 5.515780] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.515782] usb 2-1: Product: USB OPTICAL MOUSE
[ 5.525355] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.542947] usbcore: registered new interface driver usbhid
[ 5.542948] usbhid: USB HID core driver
[ 5.544348] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/0003:0000:3825.0001/input/input3
[ 5.544424] hid-generic 0003:0000:3825.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1/input0
[ 5.585098] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.901456] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.185990] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 6.217427] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.366742] random: fast init done
[ 6.384757] usb 2-2: New USB device found, idVendor=1c4f, idProduct=0202, bcdDevice= 3.21
[ 6.384760] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.384762] usb 2-2: Product: Usb KeyBoard
[ 6.384764] usb 2-2: Manufacturer: Usb KeyBoard
[ 6.403017] input: Usb KeyBoard Usb KeyBoard as /devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2:1.0/0003:1C4F:0202.0002/input/input4
[ 6.462204] hid-generic 0003:1C4F:0202.0002: input,hidraw1: USB HID v1.11 Keyboard [Usb KeyBoard Usb KeyBoard] on usb-0000:00:1a.0-2/input0
[ 6.488235] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488241] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488247] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488253] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488259] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488265] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488271] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488277] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488283] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488289] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488295] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488301] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488307] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488313] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488318] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488324] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488330] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488336] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488342] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488348] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488354] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488359] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488365] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488370] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488376] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488381] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488387] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488392] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488398] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488404] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488409] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488415] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488420] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488426] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488431] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488437] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488442] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488448] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488453] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488459] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488464] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488470] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488475] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488481] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488486] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488492] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488498] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488503] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488509] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488514] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488520] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488525] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488531] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488536] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488542] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488547] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488553] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488558] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488564] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488569] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488575] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488580] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488586] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488591] hid-generic 0003:1C4F:0202.0003: unknown main item tag 0x0
[ 6.488597] hid-generic 0003:1C4F:0202.0003: unbalanced collection at end of report description
[ 6.488642] hid-generic: probe of 0003:1C4F:0202.0003 failed with error -22
[ 6.533102] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.849498] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.850688] ata6.00: ATA-8: ST3500414CS, SC13, max UDMA/133
[ 6.850691] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
[ 6.852137] ata6.00: configured for UDMA/133
[ 6.852379] scsi 5:0:0:0: Direct-Access ATA ST3500414CS SC13 PQ: 0 ANSI: 5
[ 6.859852] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 6.859863] sd 5:0:0:0: [sda] Write Protect is off
[ 6.859865] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.859875] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.873959] usb usb3-port1: Cannot enable. Maybe the USB cable is bad?
[ 6.914537] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 6.915737] sd 5:0:0:0: [sda] Attached SCSI disk
[ 7.693995] usb 3-1: new high-speed USB device number 3 using ehci-pci
[ 7.805924] PM: Image not found (code -22)
[ 8.122471] cryptd: max_cpu_qlen set to 1000
[ 8.251352] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.505975] usb usb3-port1: Cannot enable. Maybe the USB cable is bad?
[ 9.506048] usb usb3-port1: attempt power cycle
[ 9.860153] systemd[1]: Inserted module 'autofs4'
[ 10.039735] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 10.058163] systemd[1]: Detected architecture x86-64.
[ 10.069931] systemd[1]: Set hostname to <debian>.
[ 10.258944] random: crng init done
[ 11.622041] usb usb3-port1: Cannot enable. Maybe the USB cable is bad?
[ 11.866770] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.866932] systemd[1]: Listening on Journal Audit Socket.
[ 11.868022] systemd[1]: Created slice system-getty.slice.
[ 11.868202] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.868217] systemd[1]: Reached target Remote File Systems.
[ 11.868333] systemd[1]: Listening on Journal Socket.
[ 11.869057] systemd[1]: Mounting Huge Pages File System...
[ 12.025983] usb 3-1: new high-speed USB device number 5 using ehci-pci
[ 12.324840] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.453959] usb 3-1: device not accepting address 5, error -71
[ 12.454017] usb usb3-port1: unable to enumerate USB device
[ 12.597975] usb 3-5: new high-speed USB device number 6 using ehci-pci
[ 12.717926] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 12.765733] usb 3-5: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 12.765737] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.765740] usb 3-5: Product: 802.11 n WLAN
[ 12.765743] usb 3-5: Manufacturer: MediaTek
[ 12.765745] usb 3-5: SerialNumber: 1.0
[ 12.883772] usb 6-1: not running at top speed; connect to a high speed hub
[ 12.917775] usb 6-1: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00
[ 12.917779] usb 6-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 12.917781] usb 6-1: Product: SAMSUNG_Android
[ 12.917784] usb 6-1: Manufacturer: SAMSUNG
[ 12.917786] usb 6-1: SerialNumber: ce071607a2352f0c05
[ 13.394448] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.725303] iTCO_vendor_support: vendor-support=0
[ 13.917769] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 13.929058] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.929112] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0860)
[ 13.929219] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.498803] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 14.506025] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.599166] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 14.599168] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.599170] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.599171] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.599172] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 14.599173] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.599174] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 14.599176] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 14.599177] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 14.622528] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.622604] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.622673] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.622742] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.622819] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.622886] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.622951] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.623012] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.859809] cdc_acm 6-1:1.1: ttyACM0: USB ACM device
[ 15.860893] usbcore: registered new interface driver cdc_acm
[ 15.860894] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.500407] Adding 4052988k swap on /dev/sda6. Priority:-2 extents:1 across:4052988k FS
[ 17.434041] usb 3-5: reset high-speed USB device number 6 using ehci-pci
[ 17.593300] mt7601u 3-5:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 17.680183] mt7601u 3-5:1.0: firmware: direct-loading firmware mt7601u.bin
[ 17.680193] mt7601u 3-5:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 18.085255] mt7601u 3-5:1.0: EEPROM ver:0d fae:00
[ 18.248014] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 18.477097] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.477349] usbcore: registered new interface driver mt7601u
[ 18.639761] mt7601u 3-5:1.0 wlx20e517053293: renamed from wlan0
[ 18.873019] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 18.913946] systemd-journald[249]: Received request to flush runtime journal from PID 1
[ 24.861672] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 25.603928] audit: type=1400 audit(1607498106.424:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=569 comm="apparmor_parser"
[ 25.604587] audit: type=1400 audit(1607498106.424:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=571 comm="apparmor_parser"
[ 25.606335] audit: type=1400 audit(1607498106.428:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=573 comm="apparmor_parser"
[ 25.619138] audit: type=1400 audit(1607498106.440:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=570 comm="apparmor_parser"
[ 25.619144] audit: type=1400 audit(1607498106.440:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=570 comm="apparmor_parser"
[ 25.619148] audit: type=1400 audit(1607498106.440:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=570 comm="apparmor_parser"
[ 25.624614] audit: type=1400 audit(1607498106.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=574 comm="apparmor_parser"
[ 25.624618] audit: type=1400 audit(1607498106.444:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=574 comm="apparmor_parser"
[ 25.650183] audit: type=1400 audit(1607498106.472:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=575 comm="apparmor_parser"
[ 25.650188] audit: type=1400 audit(1607498106.472:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=575 comm="apparmor_parser"
[ 31.586905] IPv6: ADDRCONF(NETDEV_UP): ens128: link is not ready
[ 31.637039] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[ 31.637540] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 31.894107] IPv6: ADDRCONF(NETDEV_UP): ens128: link is not ready
[ 31.898554] IPv6: ADDRCONF(NETDEV_UP): wlx20e517053293: link is not ready
[ 31.932795] IPv6: ADDRCONF(NETDEV_UP): wlx20e517053293: link is not ready
[ 31.965035] IPv6: ADDRCONF(NETDEV_UP): wlx20e517053293: link is not ready
[ 32.285998] IPv6: ADDRCONF(NETDEV_UP): wlx20e517053293: link is not ready
[ 33.067039] NET: Registered protocol family 3
[ 33.253280] NET: Registered protocol family 5
[ 33.580819] IPv6: ADDRCONF(NETDEV_UP): wlx20e517053293: link is not ready
[ 34.875896] wlx20e517053293: authenticate with 5c:e8:83:82:a7:a8
[ 34.913272] wlx20e517053293: send auth to 5c:e8:83:82:a7:a8 (try 1/3)
[ 34.915543] wlx20e517053293: authenticated
[ 34.917926] wlx20e517053293: associate with 5c:e8:83:82:a7:a8 (try 1/3)
[ 34.923461] wlx20e517053293: RX AssocResp from 5c:e8:83:82:a7:a8 (capab=0x1431 status=0 aid=1)
[ 34.962934] wlx20e517053293: associated
[ 34.974237] wlx20e517053293: Limiting TX power to 30 (30 - 0) dBm as advertised by 5c:e8:83:82:a7:a8
[ 35.084777] broken atomic modeset userspace detected, disabling atomic
[ 36.062155] IPv6: ADDRCONF(NETDEV_CHANGE): wlx20e517053293: link becomes ready
lu@debian:~$