Inicialização lenta, possivelmente o HD

Vandresen
(usa Ubuntu)

Enviado em 29/06/2008 - 20:09h

Queria que alguém me ajudasse com o problema de inicialização lenta, demora uns 5 minutos ou mais para iniciar o Ubuntu. Outra pessoa me passou a dica de fazer o comando dmesg. O erro acontece a partir do 43.######

Obrigado pela ajuda!

Resultado do " dmesg "

[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130992
[ 0.000000] HighMem 130992 -> 130992
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130992
[ 0.000000] On node 0 totalpages: 130992
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125905 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FAB00 checksum 0
[ 0.000000] ACPI: RSDP 000FAB00, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1FFB0000, 0030 (r1 A M I OEMRSDT 4000620 MSFT 97)
[ 0.000000] ACPI: FACP 1FFB0200, 0081 (r1 A M I OEMFACP 4000620 MSFT 97)
[ 0.000000] ACPI: DSDT 1FFB03E0, 3641 (r1 A0232 A0232008 8 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFC0000, 0040
[ 0.000000] ACPI: APIC 1FFB0390, 004A (r1 A M I OEMAPIC 4000620 MSFT 97)
[ 0.000000] ACPI: OEMB 1FFC0040, 003F (r1 A M I OEMBIOS 4000620 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129969
[ 0.000000] Kernel command line: root=UUID=A40C-545C loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1800.096 MHz processor.
[ 31.121351] Console: colour VGA+ 80x25
[ 31.121355] console [tty0] enabled
[ 31.121604] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 31.122067] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 31.132534] Memory: 507044k/523968k available (2157k kernel code, 16308k reserved, 998k data, 364k init, 0k highmem)
[ 31.132542] virtual kernel memory layout:
[ 31.132543] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 31.132545] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 31.132546] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 31.132547] lowmem : 0xc0000000 - 0xdffb0000 ( 511 MB)
[ 31.132549] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 31.132550] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 31.132551] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 31.132554] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 31.132586] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 31.212497] Calibrating delay using timer specific routine.. 3604.67 BogoMIPS (lpj=7209356)
[ 31.212521] Security Framework initialized
[ 31.212526] SELinux: Disabled at boot.
[ 31.212540] AppArmor: AppArmor initialized
[ 31.212544] Failure registering capabilities with primary security module.
[ 31.212552] Mount-cache hash table entries: 512
[ 31.212657] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[ 31.212667] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 31.212669] CPU: L2 Cache: 128K (64 bytes/line)
[ 31.212672] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[ 31.212681] Compat vDSO mapped to ffffe000.
[ 31.212691] Checking 'hlt' instruction... OK.
[ 31.228750] SMP alternatives: switching to UP code
[ 31.229994] Freeing SMP alternatives: 11k freed
[ 31.230122] Early unpacking initramfs... done
[ 31.582925] ACPI: Core revision 20070126
[ 31.582988] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 31.584730] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[ 31.584753] Total of 1 processors activated (3604.67 BogoMIPS).
[ 31.585254] ENABLING IO-APIC IRQs
[ 31.585573] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 31.731788] Brought up 1 CPUs
[ 31.731842] CPU0 attaching sched-domain:
[ 31.731845] domain 0: span 01
[ 31.731847] groups: 01
[ 31.732026] net_namespace: 64 bytes
[ 31.732034] Booting paravirtualized kernel on bare hardware
[ 31.732526] Time: 13:06:45 Date: 06/29/08
[ 31.732553] NET: Registered protocol family 16
[ 31.732727] EISA bus registered
[ 31.732764] ACPI: bus type pci registered
[ 31.733500] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 31.733502] PCI: Using configuration type 1
[ 31.733504] Setting up standard PCI resources
[ 31.740148] ACPI: EC: Look up EC in DSDT
[ 31.742798] ACPI: Interpreter enabled
[ 31.742801] ACPI: (supports S0 S1 S3 S4 S5)
[ 31.742815] ACPI: Using IOAPIC for interrupt routing
[ 31.748371] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 31.749109] PCI: enabled onboard AC97/MC97 devices
[ 31.749368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 31.757066] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 31.757160] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 31.757246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 31.757331] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
[ 31.757416] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 31.757502] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 31.757588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 31.757674] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 31.757791] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 08, should be 03 [20070126]
[ 31.757798] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 31.757827] pnp: PnP ACPI init
[ 31.757837] ACPI: bus type pnp registered
[ 31.760510] pnp: PnP ACPI: found 13 devices
[ 31.760514] ACPI: ACPI bus type pnp unregistered
[ 31.760519] PnPBIOS: Disabled by ACPI PNP
[ 31.760730] PCI: Using ACPI for IRQ routing
[ 31.760734] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 31.771736] NET: Registered protocol family 8
[ 31.771739] NET: Registered protocol family 20
[ 31.771811] AppArmor: AppArmor Filesystem Enabled
[ 31.775683] Time: tsc clocksource has been installed.
[ 31.783716] system 00:08: ioport range 0x290-0x297 has been reserved
[ 31.783724] system 00:09: ioport range 0x3e1-0x3e7 has been reserved
[ 31.783727] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 31.783729] system 00:09: ioport range 0x800-0x87f has been reserved
[ 31.783732] system 00:09: ioport range 0x400-0x41f has been reserved
[ 31.783739] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 31.783742] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 31.783746] system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
[ 31.783754] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 31.783756] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
[ 31.783759] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 31.783762] system 00:0c: iomem range 0x100000-0x1ffeffff could not be reserved
[ 31.783765] system 00:0c: iomem range 0x0-0x0 could not be reserved
[ 31.814110] PCI: Bridge: 0000:00:01.0
[ 31.814113] IO window: disabled.
[ 31.814117] MEM window: f9f00000-fbffffff
[ 31.814120] PREFETCH window: e0000000-f8ffffff
[ 31.814144] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 31.814158] NET: Registered protocol family 2
[ 31.851651] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 31.851873] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 31.851989] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 31.852137] TCP: Hash tables configured (established 16384 bind 16384)
[ 31.852140] TCP reno registered
[ 31.863692] checking if image is initramfs... it is
[ 32.314900] Switched to high resolution mode on CPU 0
[ 32.546213] Freeing initrd memory: 7702k freed
[ 32.546781] audit: initializing netlink socket (disabled)
[ 32.546796] audit(1214744805.312:1): initialized
[ 32.548497] VFS: Disk quotas dquot_6.5.1
[ 32.548569] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 32.548704] io scheduler noop registered
[ 32.548707] io scheduler anticipatory registered
[ 32.548709] io scheduler deadline registered
[ 32.548719] io scheduler cfq registered (default)
[ 32.548733] PCI: VIA PCI bridge detected. Disabling DAC.
[ 32.548805] Boot video device is 0000:01:00.0
[ 32.549053] isapnp: Scanning for PnP cards...
[ 32.902454] isapnp: No Plug & Play device found
[ 32.932513] Real Time Clock Driver v1.12ac
[ 32.932596] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.932709] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.933390] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.934340] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.934409] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 32.934503] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 32.934891] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.934896] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 32.945926] mice: PS/2 mouse device common for all mice
[ 32.946044] EISA: Probing bus 0 at eisa.0
[ 32.946052] Cannot allocate resource for EISA slot 1
[ 32.946079] EISA: Detected 0 cards.
[ 32.946081] cpuidle: using governor ladder
[ 32.946083] cpuidle: using governor menu
[ 32.946174] NET: Registered protocol family 1
[ 32.946202] Using IPI No-Shortcut mode
[ 32.946233] registered taskstats version 1
[ 32.946355] Magic number: 12:621:130
[ 32.946497] hash matches device PNP0C02:02
[ 32.946502] hash matches device device:05
[ 32.946506] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 32.946508] EDD information not available.
[ 32.946839] Freeing unused kernel memory: 364k freed
[ 32.973825] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 34.215119] fuse init (API version 7.9)
[ 34.862942] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
[ 34.863001] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 34.863515] eth0: IC Plus Corporation IP100A FAST Ethernet Adapter at 0001e800, 00:08:54:db:53:ba, IRQ 16.
[ 34.863968] eth0: MII PHY found at address 0, status 0x786d advertising 01e1.
[ 35.226500] SCSI subsystem initialized
[ 35.290239] libata version 3.00 loaded.
[ 35.302249] usbcore: registered new interface driver usbfs
[ 35.302273] usbcore: registered new interface driver hub
[ 35.311622] sata_via 0000:00:0f.0: version 2.3
[ 35.311648] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
[ 35.311690] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 35.319641] usbcore: registered new device driver usb
[ 35.347797] scsi0 : sata_via
[ 35.359064] USB Universal Host Controller Interface driver v3.0
[ 35.366081] scsi1 : sata_via
[ 35.366144] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xc800 irq 17
[ 35.366147] ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc808 irq 17
[ 35.569762] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 35.781427] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 35.792250] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
[ 35.792306] ACPI: PCI interrupt for device 0000:00:0f.1 disabled
[ 35.794358] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 35.794372] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 35.794616] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 35.794648] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000b000
[ 35.794789] usb usb1: configuration #1 chosen from 1 choice
[ 35.794810] hub 1-0:1.0: USB hub found
[ 35.794815] hub 1-0:1.0: 2 ports detected
[ 35.897384] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18
[ 35.897397] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 35.897426] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 35.897449] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000b400
[ 35.897552] usb usb2: configuration #1 chosen from 1 choice
[ 35.897573] hub 2-0:1.0: USB hub found
[ 35.897579] hub 2-0:1.0: 2 ports detected
[ 36.001196] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18
[ 36.001209] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 36.001237] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 36.001261] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000b800
[ 36.001364] usb usb3: configuration #1 chosen from 1 choice
[ 36.001388] hub 3-0:1.0: USB hub found
[ 36.001393] hub 3-0:1.0: 2 ports detected
[ 36.105032] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 18
[ 36.105045] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 36.105070] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 36.105093] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000c000
[ 36.105205] usb usb4: configuration #1 chosen from 1 choice
[ 36.105229] hub 4-0:1.0: USB hub found
[ 36.105234] hub 4-0:1.0: 2 ports detected
[ 36.208964] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18
[ 36.208977] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 36.209009] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 36.209047] ehci_hcd 0000:00:10.4: irq 18, io mem 0xf9900000
[ 36.220769] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.220893] usb usb5: configuration #1 chosen from 1 choice
[ 36.220917] hub 5-0:1.0: USB hub found
[ 36.220923] hub 5-0:1.0: 8 ports detected
[ 36.325016] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 36.325551] eth1: IC Plus Corporation IP100A FAST Ethernet Adapter at 0001e400, 00:06:4f:5f:02:e3, IRQ 19.
[ 36.325991] eth1: MII PHY found at address 0, status 0x7849 advertising 01e1.
[ 36.632637] pata_via 0000:00:0f.1: version 0.3.3
[ 36.632656] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
[ 36.634999] scsi2 : pata_via
[ 36.637010] scsi3 : pata_via
[ 36.638451] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 36.638455] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 36.808255] ata3.00: ATA-7: SAMSUNG SP0842N, BH100-50, max UDMA/100
[ 36.808260] ata3.00: 156301488 sectors, multi 16: LBA48
[ 36.808440] ata3.01: ATA-6: ST340015A, 3.01, max UDMA/100
[ 36.808443] ata3.01: 78165360 sectors, multi 16: LBA
[ 36.808454] ata3.00: limited to UDMA/33 due to 40-wire cable
[ 36.848069] ata3.00: configured for UDMA/33
[ 36.864042] ata3.01: configured for UDMA/100
[ 37.347314] ata4.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, 1.00, max UDMA/33
[ 37.347337] ata4.01: ATAPI: HL-DT-ST CD-ROM GCR-8520B, 1.00, max MWDMA2
[ 37.518900] ata4.00: configured for UDMA/33
[ 37.690695] ata4.01: configured for MWDMA2
[ 37.690813] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP0842N BH10 PQ: 0 ANSI: 5
[ 37.691274] scsi 2:0:1:0: Direct-Access ATA ST340015A 3.01 PQ: 0 ANSI: 5
[ 43.181821] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 43.181833] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 43.181835] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 43.181836] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 43.181840] ata4.00: status: { DRDY }
[ 48.213899] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 53.190101] ata4: device not ready (errno=-16), forcing hardreset
[ 53.190107] ata4: soft resetting link
[ 53.845289] ata4.00: configured for UDMA/33
[ 54.017105] ata4.01: configured for MWDMA2
[ 54.017123] ata4: EH complete
[ 59.508208] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 59.508221] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 59.508222] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 59.508224] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 59.508227] ata4.00: status: { DRDY }
[ 64.540286] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 69.516480] ata4: device not ready (errno=-16), forcing hardreset
[ 69.516486] ata4: soft resetting link
[ 70.171676] ata4.00: configured for UDMA/33
[ 70.343834] ata4.01: configured for MWDMA2
[ 70.343852] ata4: EH complete
[ 75.834595] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 75.834607] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 75.834609] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 75.834611] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 75.834614] ata4.00: status: { DRDY }
[ 80.866677] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 85.842866] ata4: device not ready (errno=-16), forcing hardreset
[ 85.842872] ata4: soft resetting link
[ 86.498064] ata4.00: configured for UDMA/33
[ 86.669837] ata4.01: configured for MWDMA2
[ 86.669854] ata4: EH complete
[ 92.160983] ata4.00: limiting speed to UDMA/25:PIO4
[ 92.160990] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 92.161000] ata4.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 92.161001] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 92.161003] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 92.161006] ata4.00: status: { DRDY }
[ 97.193065] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 102.169256] ata4: device not ready (errno=-16), forcing hardreset
[ 102.169262] ata4: soft resetting link
[ 102.824452] ata4.00: configured for UDMA/25
[ 102.996224] ata4.01: configured for MWDMA2
[ 102.996246] ata4: EH complete
[ 102.996256] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 102.996522] scsi 3:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B 1.00 PQ: 0 ANSI: 5
[ 102.997829] scsi 3:0:1:0: CD-ROM HL-DT-ST CD-ROM GCR-8520B 1.00 PQ: 0 ANSI: 5
[ 103.014016] Driver 'sd' needs updating - please use bus_type methods
[ 103.014102] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 103.014114] sd 2:0:0:0: [sda] Write Protect is off
[ 103.014116] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 103.014132] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 103.014176] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 103.014185] sd 2:0:0:0: [sda] Write Protect is off
[ 103.014187] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 103.014200] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 103.014204] sda: sda1
[ 103.019716] sd 2:0:0:0: [sda] Attached SCSI disk
[ 103.019786] sd 2:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
[ 103.019798] sd 2:0:1:0: [sdb] Write Protect is off
[ 103.019801] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 103.019816] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 103.019856] sd 2:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
[ 103.019864] sd 2:0:1:0: [sdb] Write Protect is off
[ 103.019867] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 103.019880] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 103.019884] sdb:<4>Driver 'sr' needs updating - please use bus_type methods
[ 103.032171] sdb1
[ 103.032242] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 103.043196] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 103.043216] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 103.043233] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 103.043249] scsi 3:0:1:0: Attached scsi generic sg3 type 5
[ 103.670193] loop: module loaded
[ 103.722067] kjournald starting. Commit interval 5 seconds
[ 103.722081] EXT3-fs: mounted filesystem with ordered data mode.
[ 108.850811] Linux agpgart interface v0.102
[ 108.894842] agpgart: Detected AGP bridge 0
[ 108.896015] agpgart: AGP aperture is 32M @ 0xdc000000
[ 109.077940] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 109.146460] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 109.290303] input: Power Button (FF) as /devices/virtual/input/input2
[ 109.306106] ACPI: Power Button (FF) [PWRF]
[ 109.306247] input: Power Button (CM) as /devices/virtual/input/input3
[ 109.318067] ACPI: Power Button (CM) [PWRB]
[ 109.318188] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 109.334037] ACPI: Sleep Button (CM) [SLPB]
[ 111.551506] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 112.821910] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[ 112.821921] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[ 112.881751] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 112.911226] parport_pc 00:07: reported by Plug and Play ACPI
[ 112.911322] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 113.575391] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 114.078813] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[ 114.078831] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 114.078983] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
[ 114.079118] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 114.592975] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
[ 114.599964] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
[ 114.607016] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
[ 114.614004] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
[ 132.992924] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 132.992937] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
[ 132.992938] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 132.992940] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 132.992943] ata4.00: status: { DRDY }
[ 138.025004] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 143.001203] ata4: device not ready (errno=-16), forcing hardreset
[ 143.001208] ata4: soft resetting link
[ 143.656396] ata4.00: configured for UDMA/25
[ 143.828222] ata4.01: configured for MWDMA2
[ 143.828239] ata4: EH complete
[ 173.780938] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 173.780951] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
[ 173.780953] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 173.780954] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 173.780958] ata4.00: status: { DRDY }
[ 178.813017] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 183.789213] ata4: device not ready (errno=-16), forcing hardreset
[ 183.789218] ata4: soft resetting link
[ 184.444407] ata4.00: configured for UDMA/25
[ 184.616193] ata4.01: configured for MWDMA2
[ 184.616209] ata4: EH complete
[ 214.568950] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 214.568963] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
[ 214.568964] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 214.568966] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 214.568969] ata4.00: status: { DRDY }
[ 219.601029] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 224.577223] ata4: device not ready (errno=-16), forcing hardreset
[ 224.577228] ata4: soft resetting link
[ 225.232419] ata4.00: configured for UDMA/25
[ 225.404214] ata4.01: configured for MWDMA2
[ 225.404231] ata4: EH complete
[ 255.356963] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 255.356975] ata4.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 128 in
[ 255.356977] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 255.356978] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 255.356982] ata4.00: status: { DRDY }
[ 260.389044] ata4: port is slow to respond, please be patient (Status 0xd0)
[ 265.365236] ata4: device not ready (errno=-16), forcing hardreset
[ 265.365241] ata4: soft resetting link
[ 266.020432] ata4.00: configured for UDMA/25
[ 266.192227] ata4.01: configured for MWDMA2
[ 266.192249] ata4: EH complete
[ 266.192261] sr0: scsi-1 drive
[ 266.192263] Uniform CD-ROM driver Revision: 3.20
[ 266.192325] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 288.859917] lp0: using parport0 (interrupt-driven).
[ 289.477258] EXT3 FS on loop0, internal journal
[ 290.132073] kjournald starting. Commit interval 5 seconds
[ 290.132103] EXT3 FS on loop1, internal journal
[ 290.132107] EXT3-fs: mounted filesystem with ordered data mode.
[ 290.132609] kjournald starting. Commit interval 5 seconds
[ 290.132639] EXT3 FS on loop2, internal journal
[ 290.132644] EXT3-fs: mounted filesystem with ordered data mode.
[ 292.056396] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 295.072230] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 295.524080] No dock devices found.
[ 295.875786] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 295.876913] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 296.148970] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 296.148983] ata4.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 dma 128 in
[ 296.148985] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 296.148986] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 296.148989] ata4.01: status: { DRDY }
[ 296.149011] ata4: soft resetting link
[ 296.804139] ata4.00: configured for UDMA/25
[ 296.975978] ata4.01: configured for MWDMA2
[ 296.975992] ata4: EH complete
[ 297.234834] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 297.234840] apm: overridden by ACPI.
[ 297.388241] ppdev: user-space parallel port driver
[ 297.567078] audit(1214755871.779:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=7823 profile="/usr/sbin/cupsd" namespace="default"
[ 298.769671] eth0: Link changed: 100Mbps, full duplex
[ 298.807009] Bluetooth: Core ver 2.11
[ 298.808753] NET: Registered protocol family 31
[ 298.808758] Bluetooth: HCI device and connection manager initialized
[ 298.808762] Bluetooth: HCI socket layer initialized
[ 298.833763] Bluetooth: L2CAP ver 2.9
[ 298.833769] Bluetooth: L2CAP socket layer initialized
[ 298.918609] Bluetooth: RFCOMM socket layer initialized
[ 298.918626] Bluetooth: RFCOMM TTY layer initialized
[ 298.918628] Bluetooth: RFCOMM ver 1.8
[ 319.761964] NET: Registered protocol family 10
[ 319.762189] lo: Disabled Privacy Extensions
[ 326.928720] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 326.928734] ata4.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 dma 128 in
[ 326.928736] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 326.928738] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 326.928741] ata4.01: status: { DRDY }
[ 326.928762] ata4: soft resetting link
[ 327.583884] ata4.00: configured for UDMA/25
[ 327.747729] ata4.01: configured for MWDMA2
[ 327.747744] ata4: EH complete
[ 329.828120] eth1: no IPv6 routers present
[ 329.995855] eth0: no IPv6 routers present
[ 350.764938] NET: Registered protocol family 17
[ 357.700409] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 357.700423] ata4.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 dma 128 in
[ 357.700425] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 357.700426] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 357.700430] ata4.01: status: { DRDY }
[ 357.700456] ata4: soft resetting link
[ 358.355621] ata4.00: configured for UDMA/25
[ 358.519437] ata4.01: configured for MWDMA2
[ 358.519452] ata4: EH complete
[ 367.281349] eth0: no IPv6 routers present
[ 388.472134] ata4.01: limiting speed to MWDMA1:PIO4
[ 388.472142] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 388.472152] ata4.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 dma 128 in
[ 388.472154] cdb 5a 00 2a 00 00 00 00 00 80 00 00 00 00 00 00 00
[ 388.472155] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 388.472159] ata4.01: status: { DRDY }
[ 388.472183] ata4: soft resetting link
[ 389.127331] ata4.00: configured for UDMA/25
[ 389.299153] ata4.01: configured for MWDMA1
[ 389.299177] ata4: EH complete
[ 389.299239] sr1: scsi-1 drive
[ 389.299303] sr 3:0:1:0: Attached scsi CD-ROM sr1

albfneto
(usa openSUSE)

Enviado em 29/06/2008 - 20:21h

vc que colocou o outro tópico, agora de tarde. não?
vc parece estar com problema de disco HD,ou de pente de memoria ou d eBIOS. tentou dar boot com CD de Ubuntu, como se fosse instalar de novo, so que vc não vai instalar, só rodar, isto é, seUbntu Live, vc consegue usar?
é só o linux que demora ou tb win, se vc tem windows em boot duplo?

Teixeira
(usa Linux Mint)

Enviado em 29/06/2008 - 20:25h

Tem gato na tuba!

Na configuração de ata4 o sistema está fazendo várias tentativas, informando que a resposta da porta está lenta.

O dispositivo não está pronto (erro n. 16).

Está forçando o reset por hardware em cada uma tas tentativas.

A velocidade está limitada a PIO4 e foram tentadas sem sucesso udma33 e udma25.

Por fim, depois de marchas e contramarchas, instalou como dma25.

Deve estar realmente uma verdadeira carroça.

Veja se a bios setup está com os parâmetros corretos.

Vandresen
(usa Ubuntu)

Enviado em 29/06/2008 - 22:53h

Eu postei hoje a tarde sim, no fórum de iniciantes em linux (e sou) com o problema na configuração da placa de vídeo e esse de inicialização.

Esse problema ocorre tanto com boot single como agora que estou usando dual boot, e o win tá iniciando bem rápido (30s + ou -) como sempre esteve. O win eu rodo em um Samsung de 80Gb e 7400rpm, o Ubuntu nesse Seagate de 40Gb e 5400rpm.

Teste de memória eu executei quando iniciei pelo CD e não acusou nenhum erro.
Sobre esses parâmetros da bios, como eu poderia ver (seria del na primeira tela?) e qual é o parâmetro correto?

Muito obrigado pela ajuda!