Wicd no netbook Philco PHN10403 não funciona [RESOLVIDO]

1. Wicd no netbook Philco PHN10403 não funciona [RESOLVIDO]

Juliano Rodrigues Madeira
jrm0316

(usa Slackware)

Enviado em 27/07/2010 - 20:40h

Olá pessoal
Aqui no meu trabalho temos um servidor que dá a cada um, um ip fixo, então quando eu utilizava o Ubuntu não me preocupava com isso pois ele pegou de maneira automática, logo, coloquei o slackware 13 e não consegui fazer funcionar a internet com o Wicd. Quando não coloco ip no Wicd ele diz que não pode obter ip e quando coloco o meu ip no Wicd ele diz que a conexão falhou: não pode contactar o Internet Access Point, sendo que o meu netconfig eu o coloquei em DHCP. Vou postar aqui os comandos que eu dei...

root@rede:~# lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe980000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc80 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe940000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: intelfb

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe880000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe938000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4161
Capabilities: [90] Subsystem: Foxconn International, Inc. Device 0d4f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4169
Capabilities: [90] Subsystem: Foxconn International, Inc. Device 0d4f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4171
Capabilities: [90] Subsystem: Foxconn International, Inc. Device 0d4f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe937c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Foxconn International, Inc. Device 0d4f

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d080 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc80 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe937800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Foxconn International, Inc. Device 0d4f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e023
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ath9k
Kernel modules: ath9k

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Foxconn International, Inc. Device 0cd6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 1020 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febc0000 [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number c0-00-00-00-36-4c-e0-00
Kernel modules: r8169
------------------------------------------------------------------------------------------------------------------------
root@rede:~#



root@rede:~# dhcpcd eth0
err, eth0: ioctl SIOCGIFHWADDR: No such device
root@rede:~# dhcpcd wlan0
err, wlan0: dhcpcd already running on pid 6469 (/etc/dhcpc/dhcpcd-wlan0.pid)
------------------------------------------------------------------------------------------------------------------------
root@rede:~# ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:54 errors:0 dropped:0 overruns:0 frame:0
TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4250 (4.1 KiB) TX bytes:4250 (4.1 KiB)

wlan0 Link encap:Ethernet HWaddr 0c:60:76:63:be:97
inet addr:192.168.1.184 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e60:76ff:fe63:be97/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3028 errors:0 dropped:0 overruns:0 frame:0
TX packets:566 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:467105 (456.1 KiB) TX bytes:117678 (114.9 KiB)

wmaster0 Link encap:UNSPEC HWaddr 0C-60-76-63-BE-97-77-6C-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
-----------------------------------------------------------------------------------------------------------------------
root@rede:~# dmesg
:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: deauthenticating by local choice (reason=3)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 1
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 2
wlan0: direct probe to AP 00:1f:1f:16:47:ad try 3
wlan0: direct probe to AP 00:1f:1f:16:47:ad timed out
ACPI: EC: non-query interrupt received, switching to interrupt mode
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
pci 0000:00:02.0: PCI INT A disabled
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ath9k 0000:02:00.0: PCI INT A disabled
ata_piix 0000:00:1f.2: PCI INT B disabled
PIIX_IDE 0000:00:1f.1: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PME# disabled
uhci_hcd 0000:00:1d.3: PCI INT D disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A disabled
ACPI handle has no context!
ACPI: Preparing to enter system sleep state S3
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
Force enabled HPET at resume
pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe880000)
pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x60100, writi


  






Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts