Placa de rede wifi pci [RESOLVIDO]

1. Placa de rede wifi pci [RESOLVIDO]

Perfil removido
removido

(usa Nenhuma)

Enviado em 22/03/2017 - 16:15h

Boa tarde meus caros, venho com essa dúvida que estou neste momento. Tenho uma placa de rede wifi e ela é reconhecida pelo sistema "lspci" porém não estou conseguindo instalar o driver para poder funcionar. Tem como habilitar essa placa?

~/Área de trabalho# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:03.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8190 802.11n PCI Wireless Network Adapter

~/Área de trabalho# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.




  


2. Re: Placa de rede wifi pci

Perfil removido
removido

(usa Nenhuma)

Enviado em 28/03/2017 - 18:33h

rafaeljm2016 escreveu:

Boa tarde meus caros, venho com essa dúvida que estou neste momento. Tenho uma placa de rede wifi e ela é reconhecida pelo sistema "lspci" porém não estou conseguindo instalar o driver para poder funcionar. Tem como habilitar essa placa?

~/Área de trabalho# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)


03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:03.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8190 802.11n PCI Wireless Network Adapter

~/Área de trabalho# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.



Qual a saída dos comandos?

lspci -v


dmesg


cat /etc/group


Já tem o pacote firmware-realtek instalado no sistema?

Você usa o desktop ou note?

Qual o fabricante e modelo?





Realtek RTL8190

apt-get install -y ndiswrapper-utils-1.9

# Baixar o drive em: https://github.com/lwfinger/rtl8190p

# Usa o modulo: r8190_pci




3. Re: Placa de rede wifi pci [RESOLVIDO]

Ricardo Lino Olonca
ricardoolonca

(usa Debian)

Enviado em 28/03/2017 - 18:41h

Rode o comando iwlist scan. Poste o resultado.


4. Re: Placa de rede wifi pci [RESOLVIDO]

Perfil removido
removido

(usa Nenhuma)

Enviado em 28/03/2017 - 19:36h

# lspci -v
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Intel Corporation 4 Series Chipset DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f0000000-fb0fffff
Capabilities: [88] Subsystem: Intel Corporation 4 Series Chipset PCI Express Root Port
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Intel Corporation NM10/ICH7 Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at fb200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 1
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb100000-fb1fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 2
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at f020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fb204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200

00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at f0a0 [size=16]
Capabilities: [70] Power Management version 2
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic

00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
Subsystem: Intel Corporation NM10/ICH7 Family SMBus Controller
Flags: medium devsel, IRQ 19
I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801

01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] GF108 [GeForce GT 430]
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (64-bit, prefetchable) [size=128M]
Memory at f8000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
Kernel modules: nvidia

01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] GF108 High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fb080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Subsystem: Intel Corporation RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 27
I/O ports at d000 [size=256]
Memory at fb124000 (64-bit, prefetchable) [size=4K]
Memory at fb120000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fb100000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-02-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169


# dmesg
[ 0.000000] Linux version 4.9.0-kali3-amd64 (devel@kali.org) (gcc version 6.3.0 20170205 (Debian 6.3.0-6) ) #1 SMP Debian 4.9.16-1kali1 (2017-03-24)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-kali3-amd64 root=UUID=66712ee1-5539-4a91-97aa-7ade3dad027d ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfa80fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfa81000-0x00000000bfb03fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfb04000-0x00000000bfd4dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd4e000-0x00000000bfd56fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfd57000-0x00000000bfd60fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd61000-0x00000000bfd81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd82000-0x00000000bfd87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd88000-0x00000000bfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: /DG41WV, BIOS WVG4110H.86A.0018.2012.0510.1507 05/10/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 write-through
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff883b000fd8d0]
[ 0.000000] Base memory trampoline at [ffff883b00098000] 98000 size 24576
[ 0.000000] BRK [0xa5b27000, 0xa5b27fff] PGTABLE
[ 0.000000] BRK [0xa5b28000, 0xa5b28fff] PGTABLE
[ 0.000000] BRK [0xa5b29000, 0xa5b29fff] PGTABLE
[ 0.000000] BRK [0xa5b2a000, 0xa5b2afff] PGTABLE
[ 0.000000] BRK [0xa5b2b000, 0xa5b2bfff] PGTABLE
[ 0.000000] BRK [0xa5b2c000, 0xa5b2cfff] PGTABLE
[ 0.000000] BRK [0xa5b2d000, 0xa5b2dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34ca7000-0x3664afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F03C0 000024 (v02 Intel )
[ 0.000000] ACPI: XSDT 0x00000000BFD55E18 000044 (v01 Intel DG41WV 00000018 MSFT 00010013)
[ 0.000000] ACPI: FACP 0x00000000BFD54D98 0000F4 (v04 Intel DG41WV 00000018 MSFT 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BFD4E018 005ADD (v01 Intel DG41WV 00000018 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BFD58F40 000040
[ 0.000000] ACPI: FACS 0x00000000BFD5DF40 000040
[ 0.000000] ACPI: APIC 0x00000000BFD54F18 00006C (v02 Intel DG41WV 00000018 MSFT 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BFD5FE18 00003C (v01 Intel DG41WV 00000018 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BFD5FD98 000038 (v01 Intel DG41WV 00000018 AMI. 00000003)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfa80fff]
[ 0.000000] node 0: [mem 0x00000000bfd88000-0x00000000bfefffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1047446
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12208 pages used for memmap
[ 0.000000] DMA32 zone: 781305 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa81000-0xbfb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb04000-0xbfd4dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd4e000-0xbfd56fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd57000-0xbfd60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd61000-0xbfd81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd82000-0xbfd87fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xbff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff883c3fc00000 s103384 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031057
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-kali3-amd64 root=UUID=66712ee1-5539-4a91-97aa-7ade3dad027d ro initrd=/install/gtk/initrd.gz quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4017784K/4189784K available (6082K kernel code, 1119K rwdata, 2796K rodata, 1388K init, 684K bss, 172000K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2393.997 MHz processor
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.99 BogoMIPS (lpj=9575988)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004039] ACPI: Core revision 20160831
[ 0.011920] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.011993] Security Framework initialized
[ 0.012004] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012012] AppArmor: AppArmor disabled by boot time parameter
[ 0.012324] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014773] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016079] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.016086] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.016563] CPU: Physical Processor ID: 0
[ 0.016564] CPU: Processor Core ID: 0
[ 0.016566] mce: CPU supports 6 MCE banks
[ 0.016574] CPU0: Thermal monitoring enabled (TM2)
[ 0.016580] process: using mwait in idle threads
[ 0.016585] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.016587] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.016908] Freeing SMP alternatives memory: 24K (ffffffffb1674000 - ffffffffb167a000)
[ 0.018962] ftrace: allocating 24844 entries in 98 pages
[ 0.024108] smpboot: Max logical packages: 1
[ 0.024429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
[ 0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068000] core: PEBS disabled due to CPU errata
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] x86: Booting SMP configuration:
[ 0.068000] .... node #0, CPUs: #1 #2 #3
[ 0.306021] x86: Booted up 1 node, 4 CPUs
[ 0.306021] smpboot: Total of 4 processors activated (19151.95 BogoMIPS)
[ 0.308317] devtmpfs: initialized
[ 0.308317] x86/mm: Memory block size: 128MB
[ 0.312039] PM: Registering ACPI NVS region [mem 0xbfa81000-0xbfb03fff] (536576 bytes)
[ 0.312065] PM: Registering ACPI NVS region [mem 0xbfd57000-0xbfd60fff] (40960 bytes)
[ 0.312067] PM: Registering ACPI NVS region [mem 0xbfd82000-0xbfd87fff] (24576 bytes)
[ 0.312143] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.312153] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.312237] pinctrl core: initialized pinctrl subsystem
[ 0.312398] NET: Registered protocol family 16
[ 0.328006] cpuidle: using governor ladder
[ 0.340005] cpuidle: using governor menu
[ 0.340043] ACPI: bus type PCI registered
[ 0.340045] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.340162] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.340165] PCI: not using MMCONFIG
[ 0.340166] PCI: Using configuration type 1 for base access
[ 0.352064] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.352099] ACPI: Added _OSI(Module Device)
[ 0.352100] ACPI: Added _OSI(Processor Device)
[ 0.352101] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.352102] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.352279] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.357699] ACPI: Dynamic OEM Table Load:
[ 0.357704] ACPI: SSDT 0xFFFF883C3A671400 0002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 0.358480] ACPI: Interpreter enabled
[ 0.358498] ACPI: (supports S0 S3 S4 S5)
[ 0.358499] ACPI: Using IOAPIC for interrupt routing
[ 0.358532] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.358574] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.358578] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.358944] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.359399] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.365511] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.365516] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.365723] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
[ 0.365725] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.365727] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.365728] acpi PNP0A08:00: _OSC: platform willing to grant []
[ 0.365730] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.365955] PCI host bridge to bus 0000:00
[ 0.365957] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.365959] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.365960] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.365962] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.365964] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.365972] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.365993] DMAR: Forcing write-buffer flush capability
[ 0.365994] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.366084] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[ 0.366121] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.366170] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.366244] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.366259] pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
[ 0.366325] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.366416] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.366481] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.366530] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.366582] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.366647] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.366697] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.366750] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.366785] pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
[ 0.366866] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.366915] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.366950] pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
[ 0.367030] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.367079] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.367115] pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
[ 0.367194] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.367243] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.367279] pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
[ 0.367358] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.367415] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.367430] pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
[ 0.367503] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.367550] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.367600] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.367686] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.367739] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.367812] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.367816] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.367819] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.367931] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a
[ 0.367942] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.367949] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.367956] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.367963] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.367969] pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
[ 0.367984] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.367985] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.367987] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.367988] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.368012] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.368103] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.368149] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.368294] pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000
[ 0.368305] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.368314] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.368324] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.368330] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.368337] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[ 0.368429] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.368439] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[ 0.368564] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.368566] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.368568] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xfb0fffff]
[ 0.368615] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.368683] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.368701] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.368727] pci 0000:03:00.0: reg 0x18: [mem 0xfb124000-0xfb124fff 64bit pref]
[ 0.368744] pci 0000:03:00.0: reg 0x20: [mem 0xfb120000-0xfb123fff 64bit pref]
[ 0.368755] pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
[ 0.368829] pci 0000:03:00.0: supports D1 D2
[ 0.368831] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.380021] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.380026] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.380030] pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
[ 0.380128] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.380138] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.380141] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.380143] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.380146] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.381001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.381062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.381121] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.381180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 12 14 15)
[ 0.381238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.381298] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.381357] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.381417] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.381486] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.381618] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.381618] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.381618] vgaarb: loaded
[ 0.381618] vgaarb: bridge control possible 0000:01:00.0
[ 0.381618] PCI: Using ACPI for IRQ routing
[ 0.385150] PCI: pci_cache_line_size set to 64 bytes
[ 0.385188] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.385189] e820: reserve RAM buffer [mem 0xbfa81000-0xbfffffff]
[ 0.385190] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
[ 0.385347] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.385347] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.385347] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.389017] clocksource: Switched to clocksource hpet
[ 0.397448] VFS: Disk quotas dquot_6.6.0
[ 0.397498] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.397625] pnp: PnP ACPI init
[ 0.397787] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.397789] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.397793] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.397980] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.397982] system 00:01: [io 0x0480-0x04bf] has been reserved
[ 0.397984] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.397986] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.397988] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.397990] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.397992] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.397995] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.398150] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.398503] pnp 00:03: [dma 0 disabled]
[ 0.398569] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.398785] pnp 00:04: [dma 0 disabled]
[ 0.398850] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.399168] pnp 00:05: [dma 3]
[ 0.399311] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.399380] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.399445] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.399448] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399657] pnp: PnP ACPI: found 8 devices
[ 0.406544] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.406563] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.406566] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.406568] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.406575] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.406586] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.406588] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.406590] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.406591] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.406593] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.406595] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.406597] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.406599] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.406604] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.406608] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.406611] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.406613] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.406617] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.406619] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.406622] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xfb0fffff]
[ 0.406626] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.406628] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.406632] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.406635] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.406640] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.406642] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.406646] pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
[ 0.406649] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.406654] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.406664] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.406665] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.406667] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.406668] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.406670] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.406672] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xfb0fffff]
[ 0.406674] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.406675] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.406677] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.406679] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.406680] pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
[ 0.406682] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.406684] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.406685] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.406687] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.406688] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.406820] NET: Registered protocol family 2
[ 0.407061] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.407222] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.407474] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.407532] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.407563] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.407661] NET: Registered protocol family 1
[ 0.436141] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.436154] PCI: CLS 64 bytes, default 64
[ 0.436225] Unpacking initramfs...
[ 0.910651] Freeing initrd memory: 26256K (ffff883b34ca7000 - ffff883b3664b000)
[ 0.910657] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.910659] software IO TLB [mem 0xbba81000-0xbfa81000] (64MB) mapped at [ffff883bbba81000-ffff883bbfa80fff]
[ 0.911272] audit: initializing netlink subsys (disabled)
[ 0.911301] audit: type=2000 audit(1490728273.908:1): initialized
[ 0.911798] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.911852] zbud: loaded
[ 0.912738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.912800] io scheduler noop registered
[ 0.912801] io scheduler deadline registered
[ 0.912821] io scheduler cfq registered (default)
[ 0.913466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.913472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.913492] intel_idle: does not run on family 6 model 15
[ 0.913861] GHES: HEST is not enabled!
[ 0.913946] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.934425] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.954864] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.955295] Linux agpgart interface v0.103
[ 0.955406] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.955407] AMD IOMMUv2 functionality not available on this system
[ 0.955794] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.958447] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.958452] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.958615] mousedev: PS/2 mouse device common for all mice
[ 0.958665] rtc_cmos 00:06: RTC can wake from S4
[ 0.958787] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.958809] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.958857] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.959336] NET: Registered protocol family 10
[ 0.959579] mip6: Mobile IPv6
[ 0.959581] NET: Registered protocol family 17
[ 0.959584] mpls_gso: MPLS GSO support
[ 0.959842] microcode: sig=0x6fb, pf=0x10, revision=0xba
[ 0.959915] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.960148] registered taskstats version 1
[ 0.960169] zswap: loaded using pool lzo/zbud
[ 0.960537] rtc_cmos 00:06: setting system clock to 2017-03-28 19:11:14 UTC (1490728274)
[ 0.960606] PM: Hibernation image not present or could not be loaded.
[ 0.962085] Freeing unused kernel memory: 1388K (ffffffffb1519000 - ffffffffb1674000)
[ 0.962087] Write protecting the kernel read-only data: 10240k
[ 0.962258] Freeing unused kernel memory: 44K (ffff883ba53f5000 - ffff883ba5400000)
[ 0.965637] Freeing unused kernel memory: 1300K (ffff883ba56bb000 - ffff883ba5800000)
[ 0.971993] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.086091] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.086174] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.086185] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.086199] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.087048] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.087089] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.088152] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.088221] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.088617] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.088688] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.117090] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.117107] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.117569] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffaa9880661000, 70:71:bc:65:14:d7, XID 081000c0 IRQ 27
[ 1.117571] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.118244] ACPI: bus type USB registered
[ 1.118271] usbcore: registered new interface driver usbfs
[ 1.118285] usbcore: registered new interface driver hub
[ 1.118322] usbcore: registered new device driver usb
[ 1.118851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.119220] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.119384] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.119393] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.119400] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.119406] ehci-pci: EHCI PCI platform driver
[ 1.119429] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 1.119501] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.119502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.119504] usb usb1: Product: UHCI Host Controller
[ 1.119505] usb usb1: Manufacturer: Linux 4.9.0-kali3-amd64 uhci_hcd
[ 1.119507] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.119667] hub 1-0:1.0: USB hub found
[ 1.119674] hub 1-0:1.0: 2 ports detected
[ 1.119889] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.119895] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.119902] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.119929] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 1.119987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.119989] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.119991] usb usb2: Product: UHCI Host Controller
[ 1.119992] usb usb2: Manufacturer: Linux 4.9.0-kali3-amd64 uhci_hcd
[ 1.119994] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.120155] hub 2-0:1.0: USB hub found
[ 1.120161] hub 2-0:1.0: 2 ports detected
[ 1.120368] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.120376] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.120385] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.120413] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 1.120468] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.120470] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120471] usb usb3: Product: UHCI Host Controller
[ 1.120473] usb usb3: Manufacturer: Linux 4.9.0-kali3-amd64 uhci_hcd
[ 1.120474] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.120655] hub 3-0:1.0: USB hub found
[ 1.120662] hub 3-0:1.0: 2 ports detected
[ 1.120847] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.120854] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 1.120862] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.120890] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 1.120941] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.120943] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120945] usb usb4: Product: UHCI Host Controller
[ 1.120946] usb usb4: Manufacturer: Linux 4.9.0-kali3-amd64 uhci_hcd
[ 1.120948] usb usb4: SerialNumber: 0000:00:1d.3
[ 1.121076] hub 4-0:1.0: USB hub found
[ 1.121085] hub 4-0:1.0: 2 ports detected
[ 1.121795] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.121801] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 1.121814] ehci-pci 0000:00:1d.7: debug port 1
[ 1.123225] SCSI subsystem initialized
[ 1.125084] libata version 3.00 loaded.
[ 1.125727] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.125737] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
[ 1.140116] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.140235] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.140237] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140239] usb usb5: Product: EHCI Host Controller
[ 1.140240] usb usb5: Manufacturer: Linux 4.9.0-kali3-amd64 ehci_hcd
[ 1.140242] usb usb5: SerialNumber: 0000:00:1d.7
[ 1.140404] hub 5-0:1.0: USB hub found
[ 1.140415] hub 5-0:1.0: 8 ports detected
[ 1.168119] hub 1-0:1.0: USB hub found
[ 1.168134] hub 1-0:1.0: 2 ports detected
[ 1.196105] hub 2-0:1.0: USB hub found
[ 1.196122] hub 2-0:1.0: 2 ports detected
[ 1.224114] hub 3-0:1.0: USB hub found
[ 1.224130] hub 3-0:1.0: 2 ports detected
[ 1.252105] hub 4-0:1.0: USB hub found
[ 1.252121] hub 4-0:1.0: 2 ports detected
[ 1.252417] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.252620] ata_piix 0000:00:1f.2: version 2.13
[ 1.252677] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.254023] scsi host0: ata_piix
[ 1.254199] scsi host1: ata_piix
[ 1.254273] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0a0 irq 14
[ 1.254274] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0a8 irq 15
[ 1.421600] ata1.00: HPA detected: current 976771055, native 976773168
[ 1.421605] ata1.00: ATA-8: WDC WD5000AVVS-63M8B0, 01.00A01, max UDMA/133
[ 1.421607] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.421616] ata1.01: ATAPI: ATAPI iHAS122 W, PL02, max UDMA/100
[ 1.424178] ata1.00: configured for UDMA/133
[ 1.428684] ata1.01: configured for UDMA/100
[ 1.429152] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AVVS-6 0A01 PQ: 0 ANSI: 5
[ 1.432250] ata2.00: HPA detected: current 156299375, native 156301488
[ 1.432255] ata2.00: ATA-7: SAMSUNG HD082GJ, JE100-19, max UDMA7
[ 1.432257] ata2.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.456230] ata2.00: configured for UDMA/133
[ 1.468869] scsi 0:0:1:0: CD-ROM ATAPI iHAS122 W PL02 PQ: 0 ANSI: 5
[ 1.481281] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD082GJ 0-19 PQ: 0 ANSI: 5
[ 1.522269] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[ 1.522350] sd 1:0:0:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.522488] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.522490] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.522519] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.534696] sr 0:0:1:0: [sr0] scsi3-mmc drive: 188x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.534698] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.534729] sd 0:0:0:0: [sda] Write Protect is off
[ 1.534733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.534766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.535040] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.550612] sdb: sdb1 sdb2 < sdb5 >
[ 1.551046] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.636026] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[ 1.648036] usb 5-5: new high-speed USB device number 5 using ehci-pci
[ 1.697730] sda: sda1 sda2 sda3 < sda5 >
[ 1.715780] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.728030] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.802159] usb 5-5: New USB device found, idVendor=058f, idProduct=6366
[ 1.802162] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.802165] usb 5-5: Product: Mass Storage Device
[ 1.802167] usb 5-5: Manufacturer: Generic
[ 1.802169] usb 5-5: SerialNumber: 058F63666471
[ 1.803978] usb-storage 5-5:1.0: USB Mass Storage device detected
[ 1.804124] scsi host2: usb-storage 5-5:1.0
[ 1.804213] usbcore: registered new interface driver usb-storage
[ 1.804538] usbcore: registered new interface driver uas
[ 1.829051] usb 1-1: New USB device found, idVendor=1a2c, idProduct=0c23
[ 1.829054] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.829057] usb 1-1: Product: USB Keyboard
[ 1.829059] usb 1-1: Manufacturer: USB
[ 1.833442] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.859311] usbcore: registered new interface driver usbhid
[ 1.859312] usbhid: USB HID core driver
[ 1.860096] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:1A2C:0C23.0001/input/input3
[ 1.867161] random: fast init done
[ 1.908052] usb 2-2: New USB device found, idVendor=0810, idProduct=0003
[ 1.908055] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.908058] usb 2-2: Product: USB Gamepad
[ 1.916019] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[ 1.916026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
[ 1.924229] hid-generic 0003:1A2C:0C23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 1.932229] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C23.0002/input/input4
[ 1.934128] input: USB Gamepad as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:0810:0003.0003/input/input5
[ 1.992126] hid-generic 0003:1A2C:0C23.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 1.992207] hid-generic 0003:0810:0003.0003: input,hidraw2: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1d.1-2/input0
[ 2.096032] usb 1-2: new low-speed USB device number 3 using uhci_hcd
[ 2.279052] usb 1-2: New USB device found, idVendor=18f8, idProduct=0f97
[ 2.279056] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.279058] usb 1-2: Product: USB OPTICAL MOUSE
[ 2.297565] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:18F8:0F97.0004/input/input6
[ 2.297663] hid-generic 0003:18F8:0F97.0004: input,hidraw3: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-2/input0
[ 2.318837] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:18F8:0F97.0005/input/input7
[ 2.376216] hid-generic 0003:18F8:0F97.0005: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-2/input1
[ 2.812947] scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 2.814923] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 2.940113] clocksource: Switched to clocksource tsc
[ 4.316052] floppy0: no floppy controllers found
[ 4.360714] PM: Starting manual resume from disk
[ 4.360718] PM: Hibernation image partition 8:21 present
[ 4.360719] PM: Looking for hibernation image.
[ 4.360937] PM: Image not found (code -22)
[ 4.360939] PM: Hibernation image not present or could not be loaded.
[ 4.590718] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.410764] random: crng init done
[ 5.669787] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
[ 6.040655] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.141680] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.141831] systemd[1]: Detected architecture x86-64.
[ 6.158454] systemd[1]: Set hostname to <Desconhecido>.
[ 7.726576] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[ 7.727172] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.727356] systemd[1]: Created slice User and Session Slice.
[ 7.727402] systemd[1]: Listening on LVM2 poll daemon socket.
[ 7.727429] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.727474] systemd[1]: Listening on udev Control Socket.
[ 7.727508] systemd[1]: Listening on Syslog Socket.
[ 8.950523] nvidia: loading out-of-tree module taints kernel.
[ 8.950532] nvidia: module license 'NVIDIA' taints kernel.
[ 8.950533] Disabling lock debugging due to kernel taint
[ 8.972786] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.972911] nvidia-nvlink: Nvlink Core is being initialized, major device number 249
[ 8.972928] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.39 Tue Jan 31 20:47:00 PST 2017
[ 8.972929] (using threaded interrupts)

[ 9.051785] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.39 Tue Jan 31 19:41:48 PST 2017
[ 9.154210] [drm] Initialized
[ 9.198971] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 9.378490] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 9.407530] systemd-journald[219]: Received request to flush runtime journal from PID 1
[ 11.710018] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[ 11.710023] ACPI: Power Button [PWRB]
[ 11.710099] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 11.710101] ACPI: Power Button [PWRF]
[ 12.035002] intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 12.253247] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000049B-0x000000000000049B (\_SB.PCI0.SBRG.WGBS) (20160831/utaddress-247)
[ 12.253254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.280780] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 12.317387] leds_ss4200: no LED devices found
[ 12.413760] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.413801] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 12.413840] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 12.413882] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 12.530540] parport_pc 00:05: reported by Plug and Play ACPI
[ 12.530602] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[ 12.649801] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.785924] iTCO_vendor_support: vendor-support=0
[ 12.786907] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.786948] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 12.787095] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.836977] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 12.836984] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 12.972282] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 12.972285] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.972287] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.972288] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.972290] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 12.972291] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.972293] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 12.972295] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 12.972297] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 12.982190] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.982271] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.982345] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.982422] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.982496] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 13.085650] ppdev: user-space parallel port driver
[ 13.614440] coretemp coretemp.0: Using relative temperature scale!
[ 13.614458] coretemp coretemp.0: Using relative temperature scale!
[ 13.614468] coretemp coretemp.0: Using relative temperature scale!
[ 13.614479] coretemp coretemp.0: Using relative temperature scale!
[ 13.742412] intel_powerclamp: No package C-state available
[ 13.776292] intel_powerclamp: No package C-state available
[ 13.812363] intel_powerclamp: No package C-state available
[ 14.211832] Adding 4123644k swap on /dev/sdb5. Priority:-1 extents:1 across:4123644k FS
[ 15.836034] floppy0: no floppy controllers found
[ 15.852033] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 16.860037] snd_hda_intel 0000:01:00.1: Codec #0 probe error; disabling it...
[ 17.868028] snd_hda_intel 0000:01:00.1: Codec #1 probe error; disabling it...
[ 18.880027] snd_hda_intel 0000:01:00.1: Codec #2 probe error; disabling it...
[ 19.892043] snd_hda_intel 0000:01:00.1: Codec #3 probe error; disabling it...
[ 20.386476] Bluetooth: Core ver 2.22
[ 20.386506] NET: Registered protocol family 31
[ 20.386507] Bluetooth: HCI device and connection manager initialized
[ 20.386511] Bluetooth: HCI socket layer initialized
[ 20.386514] Bluetooth: L2CAP socket layer initialized
[ 20.386520] Bluetooth: SCO socket layer initialized
[ 20.434904] Netfilter messages via NETLINK v0.30.
[ 20.908019] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000
[ 21.430808] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 21.430900] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 21.430982] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 21.431413] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 22.229881] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.350193] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-1.fw
[ 22.413333] r8169 0000:03:00.0 eth0: link down
[ 22.413340] r8169 0000:03:00.0 eth0: link down
[ 22.413371] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.039146] r8169 0000:03:00.0 eth0: link up
[ 24.039159] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.711238] nvidia-modeset: Allocated GPU:0 (GPU-04a8923d-554d-2213-a68f-ccccc8e2c59f) @ PCI:0000:01:00.0
[ 57.655950] fuse init (API version 7.26)

cat /etc/group
root:x:0:
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:
tty:x:5:
disk:x:6:
lp:x:7:
mail:x:8:
news:x:9:
uucp:x:10:
man:x:12:
proxy:x:13:
kmem:x:15:
dialout:x:20:
fax:x:21:
voice:x:22:
cdrom:x:24:
floppy:x:25:
tape:x:26:
sudo:x:27:
audio:x:29:pulse
dip:x:30:
www-data:x:33:
backup:x:34:
operator:x:37:
list:x:38:
irc:x:39:
src:x:40:
gnats:x:41:
shadow:x:42:
utmp:x:43:
video:x:44:
sasl:x:45:
plugdev:x:46:
staff:x:50:
games:x:60:
users:x:100:
nogroup:x:65534:
systemd-journal:x:101:
systemd-timesync:x:102:
systemd-network:x:103:
systemd-resolve:x:104:
systemd-bus-proxy:x:105:
input:x:106:
crontab:x:107:
netdev:x:108:
mysql:x:109:
epmd:x:110:
Debian-exim:x:111:
mlocate:x:112:
uuidd:x:113:
ntp:x:114:
ssl-cert:x:115:postgres
stunnel4:x:116:
redsocks:x:117:
rtkit:x:118:
postgres:x:119:
messagebus:x:120:
bluetooth:x:121:
arpwatch:x:122:arpwatch
kismet:x:123:
i2c:x:124:
sslh:x:126:
inetsim:x:999:
ssh:x:127:
geoclue:x:128:
couchdb:x:129:
scanner:x:130:saned
avahi:x:131:
colord:x:132:
sambashare:x:133:
saned:x:134:
pulse:x:135:
pulse-access:x:136:
kpadmins:x:137:
lpadmin:x:138:
Debian-gdm:x:139:
dradis:x:140:
beef-xss:x:141:
Debian-snmp:x:125:

# iwlist scan
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.








# lspci -v
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Intel Corporation 4 Series Chipset DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f0000000-fb0fffff
Capabilities: [88] Subsystem: Intel Corporation 4 Series Chipset PCI Express Root Port
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Intel Corporation NM10/ICH7 Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at fb200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 1
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb100000-fb1fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 2
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd

00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
Flags: bus master,


5. Re: Placa de rede wifi pci [RESOLVIDO]

Perfil removido
removido

(usa Nenhuma)

Enviado em 28/03/2017 - 19:45h

meianoite escreveu:

rafaeljm2016 escreveu:

Boa tarde meus caros, venho com essa dúvida que estou neste momento. Tenho uma placa de rede wifi e ela é reconhecida pelo sistema "lspci" porém não estou conseguindo instalar o driver para poder funcionar. Tem como habilitar essa placa?

~/Área de trabalho# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)


03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:03.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8190 802.11n PCI Wireless Network Adapter

~/Área de trabalho# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.



Qual a saída dos comandos?

lspci -v


dmesg


cat /etc/group


Já tem o pacote firmware-realtek instalado no sistema?

Você usa o desktop ou note?

Qual o fabricante e modelo?





Realtek RTL8190

apt-get install -y ndiswrapper-utils-1.9

# Baixar o drive em: https://github.com/lwfinger/rtl8190p

# Usa o modulo: r8190_pci


Achei esse link também mais já estava cansado em vários procedimentos testados, após instalar o ndiswrapper-utils-1.9 e baixar os drivers do github qual o próximo passo, obrigado desde já pelo auxilio!
O pacote firmaware instalado é esse: https://packages.debian.org/jessie/all/firmware-realtek/download
E outra coisa, só conseguir fazer com que o sistema reconhecesse a placa por outro método em que eu baixo alguns drivers e após o comando lspci ela aparece, este é o site: http://linuxwireless.org/download/compat-wireless-2.6/
Após downlod...

Commands:
cd path-change directory
ls-list all the directory and folder
tar -jxf (filename)-for extracting the file
make unload
make load



6. Re: Placa de rede wifi pci

Perfil removido
removido

(usa Nenhuma)

Enviado em 28/03/2017 - 22:37h

rafaeljm2016 escreveu:

meianoite escreveu:

rafaeljm2016 escreveu:

Boa tarde meus caros, venho com essa dúvida que estou neste momento. Tenho uma placa de rede wifi e ela é reconhecida pelo sistema "lspci" porém não estou conseguindo instalar o driver para poder funcionar. Tem como habilitar essa placa?

~/Área de trabalho# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)


03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:03.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8190 802.11n PCI Wireless Network Adapter

~/Área de trabalho# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.



Qual a saída dos comandos?

lspci -v


dmesg


cat /etc/group


Já tem o pacote firmware-realtek instalado no sistema?

Você usa o desktop ou note?

Qual o fabricante e modelo?





Realtek RTL8190

apt-get install -y ndiswrapper-utils-1.9

# Baixar o drive em: https://github.com/lwfinger/rtl8190p

# Usa o modulo: r8190_pci


Achei esse link também mais já estava cansado em vários procedimentos testados, após instalar o ndiswrapper-utils-1.9 e baixar os drivers do github qual o próximo passo, obrigado desde já pelo auxilio!
O pacote firmaware instalado é esse: https://packages.debian.org/jessie/all/firmware-realtek/download
E outra coisa, só conseguir fazer com que o sistema reconhecesse a placa por outro método em que eu baixo alguns drivers e após o comando lspci ela aparece, este é o site: http://linuxwireless.org/download/compat-wireless-2.6/
Após downlod...

Commands:
cd path-change directory
ls-list all the directory and folder
tar -jxf (filename)-for extracting the file
make unload
make load


Vai ser difícil a rede wifi funcionar no seu Kali.

Verifica com ndiswrapper ou usa o site github.

A saída do comando lspci -v esta incompleta.

A rede cabeada esta funcionando 100%?


7. Re: Placa de rede wifi pci [RESOLVIDO]

Perfil removido
removido

(usa Nenhuma)

Enviado em 29/03/2017 - 03:54h

A rede cabeada sim, vou fechar o topico pois acho que ela só funciona mesmo no windows.






Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts