nvidia 3D com congelando

1. nvidia 3D com congelando

andreuebe
(usa Linux Mint)

Enviado em 04/04/2008 - 19:38h

Amigos

Consegui configurar minha nvidia 6200 no Kubuntu mas eventualmente a tela "congela" por 30 a 60 segundos, toda vez que há uma atualização de tela (ou algum procedimento que não consegui identificar).

Por exemplo, para escrever esta mensagem, tudo correu bem mas para acessar meu email que abre um "pop up" para digitar nova mensagem, aí acontece o problema descrito.

Se puderem ajudar, abaixo há o xorg.conf

Abs e obrigado

Andre

-----------------------

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Feb 14 18:21:33 PST 2008

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Feb 14 18:20:37 PST 2008
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
Load "v4l"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "PHILIPS 105S"
VendorName "Philips"
ModelName "Philips Brilliance 105(15inch/CM2200)"
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
ModeLine "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
EndSection

Section "Monitor"

#
Identifier "monitor1"
Gamma 1
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "PHILIPS 105S"
HorizSync 30.0 - 61.0
VertRefresh 50.0 - 120.0
EndSection

Section "Device"
Identifier "nVidia Corporation NV44A [GeForce 6200]"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 6 Series"
Option "NvAGP" "0"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"

#
Identifier "device1"
Driver "nv"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 6 Series"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
EndSection

Section "Screen"

# Monitor "PHILIPS 105S"
Identifier "Default Screen"
Device "nVidia Corporation NV44A [GeForce 6200]"
Monitor "monitor1"
Option "NvAGP" "0"
DefaultDepth 24
SubSection "Display"
Virtual 1400 1050
Depth 24
Modes "1280x960@60" "1280x1024@60" "1152x864@75" "1400x1050@60" "1024x768@43" "1024x768@60" "1024x768@70" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "Screen"

#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection

Section "Screen"

# Removed Option "TwinView" "0"
# Removed Option "metamodes" "CRT: 1024x768_87i +0+0, TV: nvidia-auto-select +0+0; CRT: 320x175 +0+0, TV: nvidia-auto-select +0+0"
# Removed Option "TwinView" "2"
# Removed Option "metamodes" "CRT: 1024x768_75 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768_87i +0+0, TV: nvidia-auto-select +0+0; CRT: 320x175 +0+0, TV: nvidia-auto-select +0+0; CRT: 320x200 +0+0, TV: nvidia-auto-select +0+0"
# Removed Option "metamodes" "CRT: 1024x768 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768_75 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768_87i +0+0, TV: nvidia-auto-select +0+0; CRT: 320x175 +0+0, TV: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: 1024x768_75 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768 +0+0, TV: nvidia-auto-select +0+0"
EndSection

0 0

Quote

2. nvidia 3D com congelando

nicolo
(usa Ubuntu)

Enviado em 14/05/2008 - 10:39h

Mérrmão O seu /etc/X11/xorg.conf tá a maior complicação que eu já vi.
Estão definidos tres monitores e tres drivers:

PRIMEIRO MONITOR
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "PHILIPS 105S"
HorizSync 30.0 - 61.0
VertRefresh 50.0 - 120.0
EndSection

PRIMEIRO DRIVER
Section "Device"
Identifier "nVidia Corporation NV44A [GeForce 6200]"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 6 Series"
Option "NvAGP" "0"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"

SEGUNDO DRIVER
#
Identifier "device1"
Driver "nv"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 6 Series"
BusID "PCI:1:0:0"
Screen 1
EndSection

TERCEIRO DRIVER
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
EndSection

Section "Screen"

MAIS UM MONITOR
# Monitor "PHILIPS 105S"
Identifier "Default Screen"
Device "nVidia Corporation NV44A [GeForce 6200]"
Monitor "monitor1"
Option "NvAGP" "0"
DefaultDepth 24
SubSection "Display"
Virtual 1400 1050
Depth 24
Modes "1280x960@60" "1280x1024@60" "1152x864@75" "1400x1050@60" "1024x768@43" "1024x768@60" "1024x768@70" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "Screen"

#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection

Section "Screen"
ISSO NÃO DÁ NEM, PARA SABERO QUE É
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "CRT: 1024x768_87i +0+0, TV: nvidia-auto-select +0+0; CRT: 320x175 +0+0, TV: nvidia-auto-select +0+0"
# Removed Option "TwinView" "2"
# Removed Option "metamodes" "CRT: 1024x768_75 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768_87i +0+0, TV: nvidia-auto-select +0+0; CRT: 320x175 +0+0, TV: nvidia-auto-select +0+0; CRT: 320x200 +0+0, TV: nvidia-auto-select +0+0"
# Removed Option "metamodes" "CRT: 1024x768 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768_75 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768_87i +0+0, TV: nvidia-auto-select +0+0; CRT: 320x175 +0+0, TV: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: 1024x768_75 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768 +0+0, TV: nvidia-auto-select +0+0"
EndSection

na instalação do driver ele deve ter feito um backup do xorg.conf.
Sufiro que você renomeie o xorg.conf atual e volte a chamar o backup de xorg.conf.
Você precisa ser root para fazer isso.

Depois de feito isso e logo em seguida de o comando:
nvidia-xconfig
ele vai gerar um novo xorg.conf e fazer um novo backup.
Depois disso reinicie o X e deveria funcionar.
POR SUA CONTA E RISCO.
Você pode ainda verificar o novo xorg.conf antes de reiniciar o X para ver se tem apenas um driver e um monitor. Do jeito que está não consigo nem saber o que está entrando.

0 0

Quote

3. Re: nvidia 3D com congelando

andreuebe
(usa Linux Mint)

Enviado em 15/05/2008 - 23:10h

Amigo

Valeu pela dica.

Vou seguir sua orientação e ver o resultado. Provavelmente vai desfazer as configurações da nvidia mas depois eu reinstalo.

Abs

Andre

0 0

Quote