audio instável no linux

1. audio instável no linux

Christian Monteiro
crmmp

(usa elementary OS)

Enviado em 01/04/2014 - 22:48h


Olá,

Como faço para deixar estável o audio do meu pc.
Instalei há uma semana o Elementary OS Luna, ele reconhece a placa de som normalmente. Mas depois de alguns minutos o audio desaparece. Cada vez que isso acontece e dou um reboot e o som volta por alguns minutos e desparece novamente.
É um problema na placa de som ou de alguma configuração no sistema?

Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04)




  


2. Re: audio instável no linux

Marcio
ZeroTrinta1

(usa Red Hat)

Enviado em 02/04/2014 - 09:58h

Complicado essa questão do som amigo, veja se pode ser problema de hardware colocando um fone de ouvido para testar o funcionamento, caso não funcione busque nas saídas de log por algum possível erro:

$dmesg

Caso o problema seja Software tente baixar o driver adequado para sua placa ou reinstalar o driver problemático.


3. Re: audio instável no linux

Christian Monteiro
crmmp

(usa elementary OS)

Enviado em 03/04/2014 - 19:34h


Apareceu esta bíblia, onde está o erro?



[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-51-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #77-Ubuntu SMP Wed Jul 24 20:18:19 UTC 2013 (Ubuntu 3.2.0-51.77-generic 3.2.48)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-51-generic root=UUID=c50bb7f8-879c-4b65-ba61-f93f7172535e ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000cd1ca000 (usable)
[ 0.000000] BIOS-e820: 00000000cd1ca000 - 00000000cd75e000 (reserved)
[ 0.000000] BIOS-e820: 00000000cd75e000 - 00000000cd968000 (usable)
[ 0.000000] BIOS-e820: 00000000cd968000 - 00000000ce00e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ce00e000 - 00000000ce46d000 (reserved)
[ 0.000000] BIOS-e820: 00000000ce46d000 - 00000000ce46e000 (usable)
[ 0.000000] BIOS-e820: 00000000ce46e000 - 00000000ce4b1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ce4b1000 - 00000000ced92000 (usable)
[ 0.000000] BIOS-e820: 00000000ced92000 - 00000000ceff2000 (reserved)
[ 0.000000] BIOS-e820: 00000000ceff2000 - 00000000cf000000 (usable)
[ 0.000000] BIOS-e820: 00000000cf800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f600000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Positivo Informatica SA POS-EINM70CS/POS-EINM70CS, BIOS 4.6.5 04/15/2013
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0CF800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3320MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4600MB, range: 8MB, type UC
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3822M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3320MB, range: 8MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 4598MB, range: 2MB, type UC
[ 0.000000] reg 6, base: 4600MB, range: 8MB, type UC
[ 0.000000] e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7e0] fd7e0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf000000
[ 0.000000] 0000000000 - 00cf000000 page 2M
[ 0.000000] kernel direct mapping tables up to cf000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f600000
[ 0.000000] 0100000000 - 011f600000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f600000 @ ceffe000-cf000000
[ 0.000000] RAMDISK: 35956000 - 36ca3000
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 POSITI)
[ 0.000000] ACPI: XSDT 00000000cd9ea078 0006C (v01 POSITI ABACAXIS 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cd9f5b70 0010C (v05 POSITI ABACAXIS 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[ 0.000000] ACPI: DSDT 00000000cd9ea178 0B9F1 (v02 POSITI ABACAXIS 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000ce00c080 00040
[ 0.000000] ACPI: APIC 00000000cd9f5c80 00062 (v03 POSITI ABACAXIS 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000cd9f5ce8 00044 (v01 POSITI ABACAXIS 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000cd9f5d30 0003C (v01 POSITI ABACAXIS 01072009 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000cd9f5d70 00176 (v01 POSITI ABACAXIS 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000cd9f5ee8 00038 (v01 POSITI ABACAXIS 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000cd9f5f20 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000cd9f6238 00692 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000cd9f68d0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f600000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f600000
[ 0.000000] NODE_DATA [000000011f5fb000 - 000000011f5fffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b000000-ffff88011ebfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000cd1ca
[ 0.000000] 0: 0x000cd75e -> 0x000cd968
[ 0.000000] 0: 0x000ce46d -> 0x000ce46e
[ 0.000000] 0: 0x000ce4b1 -> 0x000ced92
[ 0.000000] 0: 0x000ceff2 -> 0x000cf000
[ 0.000000] 0: 0x00100000 -> 0x0011f600
[ 0.000000] On node 0 totalpages: 970321
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 141 pages reserved
[ 0.000000] DMA zone: 3776 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 821508 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 126504 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000cd1ca000 - 00000000cd75e000
[ 0.000000] PM: Registered nosave memory: 00000000cd968000 - 00000000ce00e000
[ 0.000000] PM: Registered nosave memory: 00000000ce00e000 - 00000000ce46d000
[ 0.000000] PM: Registered nosave memory: 00000000ce46e000 - 00000000ce4b1000
[ 0.000000] PM: Registered nosave memory: 00000000ced92000 - 00000000ceff2000
[ 0.000000] PM: Registered nosave memory: 00000000cf000000 - 00000000cf800000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f200000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 951788
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-51-generic root=UUID=c50bb7f8-879c-4b65-ba61-f93f7172535e ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3717420k/4708352k available (6583k kernel code, 827068k absent, 163864k reserved, 6623k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1097.533 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.06 BogoMIPS (lpj=4390132)
[ 0.000010] pid_max: default: 32768 minimum: 301
[ 0.000047] Security Framework initialized
[ 0.000071] AppArmor: AppArmor initialized
[ 0.000074] Yama: becoming mindful.
[ 0.000670] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002488] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003270] Mount-cache hash table entries: 256
[ 0.003447] Initializing cgroup subsys cpuacct
[ 0.003455] Initializing cgroup subsys memory
[ 0.003469] Initializing cgroup subsys devices
[ 0.003473] Initializing cgroup subsys freezer
[ 0.003476] Initializing cgroup subsys blkio
[ 0.003485] Initializing cgroup subsys perf_event
[ 0.003533] CPU: Physical Processor ID: 0
[ 0.003536] CPU: Processor Core ID: 0
[ 0.003544] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003546] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003553] mce: CPU supports 7 MCE banks
[ 0.003575] CPU0: Thermal monitoring enabled (TM1)
[ 0.003589] using mwait in idle threads.
[ 0.008773] ACPI: Core revision 20110623
[ 0.023112] ftrace: allocating 26587 entries in 105 pages
[ 0.043661] x2apic not enabled, IRQ remapping init failed
[ 0.044064] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083753] CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz stepping 07
[ 0.190416] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.190426] PEBS disabled due to CPU errata.
[ 0.190431] ... version: 3
[ 0.190434] ... bit width: 48
[ 0.190436] ... generic registers: 8
[ 0.190439] ... value mask: 0000ffffffffffff
[ 0.190442] ... max period: 000000007fffffff
[ 0.190445] ... fixed-purpose events: 3
[ 0.190447] ... event mask: 00000007000000ff
[ 0.190644] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.190780] Booting Node 0, Processors #1 Ok.
[ 0.190785] smpboot cpu 1: start_ip = 98000
[ 0.298560] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.298564] Measured 13224634648 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.008000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.164041] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164083] Brought up 2 CPUs
[ 0.164088] Total of 2 processors activated (4390.01 BogoMIPS).
[ 0.166495] devtmpfs: initialized
[ 0.168292] EVM: security.selinux
[ 0.168295] EVM: security.SMACK64
[ 0.168298] EVM: security.capability
[ 0.168316] PM: Registering ACPI NVS region at cd968000 (6971392 bytes)
[ 0.168316] PM: Registering ACPI NVS region at ce46e000 (274432 bytes)
[ 0.169769] print_constraints: dummy:
[ 0.169810] RTC time: 14:57:05, date: 04/03/14
[ 0.169861] NET: Registered protocol family 16
[ 0.169904] Trying to unpack rootfs image as initramfs...
[ 0.170070] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.170075] ACPI: bus type pci registered
[ 0.170174] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.170180] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.203068] PCI: Using configuration type 1 for base access
[ 0.204722] bio: create slab <bio-0> at 0
[ 0.204860] ACPI: Added _OSI(Module Device)
[ 0.204864] ACPI: Added _OSI(Processor Device)
[ 0.204867] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204871] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.208414] ACPI: EC: Look up EC in DSDT
[ 0.212471] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.256922] ACPI: SSDT 00000000cd70b018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.257830] ACPI: Dynamic OEM Table Load:
[ 0.257836] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.292542] ACPI: SSDT 00000000cd70ca98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.293513] ACPI: Dynamic OEM Table Load:
[ 0.293518] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.316264] ACPI: SSDT 00000000cd70dc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.317167] ACPI: Dynamic OEM Table Load:
[ 0.317171] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.352711] ACPI: Interpreter enabled
[ 0.352720] ACPI: (supports S0 S3 S4 S5)
[ 0.352773] ACPI: Using IOAPIC for interrupt routing
[ 0.364464] ACPI: Power Resource [FN00] (off)
[ 0.364613] ACPI: Power Resource [FN01] (off)
[ 0.364764] ACPI: Power Resource [FN02] (off)
[ 0.364920] ACPI: Power Resource [FN03] (off)
[ 0.365062] ACPI: Power Resource [FN04] (off)
[ 0.366177] ACPI: No dock devices found.
[ 0.366181] HEST: Table not found.
[ 0.366187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.366816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.367711] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.367716] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.367720] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.367725] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.367730] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.367734] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.367738] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.367742] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.367746] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.367752] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 0.367775] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.367846] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.367909] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.367915] pci 0000:00:01.0: PME# disabled
[ 0.367946] pci 0000:00:01.2: [8086:0109] type 1 class 0x000604
[ 0.368006] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.368011] pci 0000:00:01.2: PME# disabled
[ 0.368050] pci 0000:00:02.0: [8086:0106] type 0 class 0x000300
[ 0.368072] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.368085] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.368094] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.368188] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[ 0.368221] pci 0000:00:16.0: reg 10: [mem 0xf7d0a000-0xf7d0a00f 64bit]
[ 0.368326] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.368332] pci 0000:00:16.0: PME# disabled
[ 0.368378] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[ 0.368408] pci 0000:00:1a.0: reg 10: [mem 0xf7d08000-0xf7d083ff]
[ 0.368532] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.368538] pci 0000:00:1a.0: PME# disabled
[ 0.368573] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[ 0.368595] pci 0000:00:1b.0: reg 10: [mem 0xf7d00000-0xf7d03fff 64bit]
[ 0.368693] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.368699] pci 0000:00:1b.0: PME# disabled
[ 0.368729] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[ 0.368839] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.368846] pci 0000:00:1c.0: PME# disabled
[ 0.368894] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[ 0.368924] pci 0000:00:1d.0: reg 10: [mem 0xf7d07000-0xf7d073ff]
[ 0.369047] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.369054] pci 0000:00:1d.0: PME# disabled
[ 0.369086] pci 0000:00:1f.0: [8086:1e5f] type 0 class 0x000601
[ 0.369253] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
[ 0.369282] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.369295] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.369308] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.369321] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.369334] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.369346] pci 0000:00:1f.2: reg 24: [mem 0xf7d06000-0xf7d067ff]
[ 0.369416] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.369422] pci 0000:00:1f.2: PME# disabled
[ 0.369447] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[ 0.369470] pci 0000:00:1f.3: reg 10: [mem 0xf7d05000-0xf7d050ff 64bit]
[ 0.369502] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.369581] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.369628] pci 0000:00:01.2: PCI bridge to [bus 02-02]
[ 0.369724] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.369749] pci 0000:03:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.369793] pci 0000:03:00.0: reg 18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.369822] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.369937] pci 0000:03:00.0: supports D1 D2
[ 0.369940] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.369948] pci 0000:03:00.0: PME# disabled
[ 0.376055] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.376063] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.376070] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.376080] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.376104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.376372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.376467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.376532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
[ 0.376783] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.377171] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.383964] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.384062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.384145] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.384223] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.384306] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.384389] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.384473] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.384551] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.384739] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.384749] vgaarb: loaded
[ 0.384752] vgaarb: bridge control possible 0000:00:02.0
[ 0.384915] i2c-core: driver [aat2870] using legacy suspend method
[ 0.384918] i2c-core: driver [aat2870] using legacy resume method
[ 0.385020] SCSI subsystem initialized
[ 0.385098] libata version 3.00 loaded.
[ 0.385182] usbcore: registered new interface driver usbfs
[ 0.385199] usbcore: registered new interface driver hub
[ 0.385244] usbcore: registered new device driver usb
[ 0.385379] PCI: Using ACPI for IRQ routing
[ 0.387599] PCI: pci_cache_line_size set to 64 bytes
[ 0.387675] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.387680] reserve RAM buffer: 00000000cd1ca000 - 00000000cfffffff
[ 0.387686] reserve RAM buffer: 00000000cd968000 - 00000000cfffffff
[ 0.387691] reserve RAM buffer: 00000000ce46e000 - 00000000cfffffff
[ 0.387695] reserve RAM buffer: 00000000ced92000 - 00000000cfffffff
[ 0.387700] reserve RAM buffer: 00000000cf000000 - 00000000cfffffff
[ 0.387704] reserve RAM buffer: 000000011f600000 - 000000011fffffff
[ 0.387866] NetLabel: Initializing
[ 0.387869] NetLabel: domain hash size = 128
[ 0.387871] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.387889] NetLabel: unlabeled traffic allowed by default
[ 0.387972] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.387983] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.390047] Switching to clocksource hpet
[ 0.398836] AppArmor: AppArmor Filesystem Enabled
[ 0.398875] pnp: PnP ACPI init
[ 0.398898] ACPI: bus type pnp registered
[ 0.399408] pnp 00:00: [bus 00-3e]
[ 0.399414] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.399418] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.399421] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.399426] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.399429] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.399433] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.399437] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.399441] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.399445] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.399449] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.399452] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.399456] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.399460] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.399464] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.399468] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.399471] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.399475] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.399479] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 0.399483] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.399606] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.399658] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.399720] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.399726] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.399748] pnp 00:02: [io 0x0000-0x001f]
[ 0.399752] pnp 00:02: [io 0x0081-0x0091]
[ 0.399755] pnp 00:02: [io 0x0093-0x009f]
[ 0.399758] pnp 00:02: [io 0x00c0-0x00df]
[ 0.399762] pnp 00:02: [dma 4]
[ 0.399800] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.399815] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.399852] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.399987] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.400058] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.400081] pnp 00:05: [io 0x002e-0x002f]
[ 0.400084] pnp 00:05: [io 0x004e-0x004f]
[ 0.400087] pnp 00:05: [io 0x0061]
[ 0.400090] pnp 00:05: [io 0x0063]
[ 0.400093] pnp 00:05: [io 0x0065]
[ 0.400096] pnp 00:05: [io 0x0067]
[ 0.400099] pnp 00:05: [io 0x0070]
[ 0.400102] pnp 00:05: [io 0x0080]
[ 0.400105] pnp 00:05: [io 0x0092]
[ 0.400111] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.400114] pnp 00:05: [io 0x0680-0x069f]
[ 0.400118] pnp 00:05: [io 0x1000-0x100f]
[ 0.400121] pnp 00:05: [io 0xffff]
[ 0.400124] pnp 00:05: [io 0xffff]
[ 0.400127] pnp 00:05: [io 0x0400-0x0453]
[ 0.400130] pnp 00:05: [io 0x0458-0x047f]
[ 0.400133] pnp 00:05: [io 0x0500-0x057f]
[ 0.400136] pnp 00:05: [io 0x164e-0x164f]
[ 0.400199] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.400204] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.400208] system 00:05: [io 0xffff] has been reserved
[ 0.400212] system 00:05: [io 0xffff] has been reserved
[ 0.400217] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.400221] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.400225] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.400230] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.400235] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400250] pnp 00:06: [io 0x0070-0x0077]
[ 0.400264] pnp 00:06: [irq 8]
[ 0.400303] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.400353] pnp 00:07: [io 0x0454-0x0457]
[ 0.400411] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.400417] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.400559] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.400563] pnp 00:08: [io 0x0a00-0x0a1f]
[ 0.400566] pnp 00:08: [io 0x0a20-0x0a2f]
[ 0.400622] system 00:08: [io 0x0a00-0x0a1f] has been reserved
[ 0.400627] system 00:08: [io 0x0a20-0x0a2f] has been reserved
[ 0.400632] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400673] pnp 00:09: [io 0x0060]
[ 0.400676] pnp 00:09: [io 0x0064]
[ 0.400684] pnp 00:09: [irq 1]
[ 0.400740] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.400805] pnp 00:0a: [irq 12]
[ 0.400855] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.401345] pnp 00:0b: [io 0x0010-0x001f]
[ 0.401349] pnp 00:0b: [io 0x0022-0x003f]
[ 0.401352] pnp 00:0b: [io 0x0044-0x005f]
[ 0.401355] pnp 00:0b: [io 0x0072-0x007f]
[ 0.401358] pnp 00:0b: [io 0x0080]
[ 0.401361] pnp 00:0b: [io 0x0084-0x0086]
[ 0.401365] pnp 00:0b: [io 0x0088]
[ 0.401368] pnp 00:0b: [io 0x008c-0x008e]
[ 0.401371] pnp 00:0b: [io 0x0090-0x009f]
[ 0.401374] pnp 00:0b: [io 0x00a2-0x00bf]
[ 0.401377] pnp 00:0b: [io 0x00e0-0x00ef]
[ 0.401380] pnp 00:0b: [io 0x04d0-0x04d1]
[ 0.401448] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.401454] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401469] pnp 00:0c: [io 0x00f0-0x00ff]
[ 0.401477] pnp 00:0c: [irq 13]
[ 0.401519] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.401913] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
[ 0.401917] pnp 00:0d: [mem 0xfed10000-0xfed17fff]
[ 0.401920] pnp 00:0d: [mem 0xfed18000-0xfed18fff]
[ 0.401924] pnp 00:0d: [mem 0xfed19000-0xfed19fff]
[ 0.401927] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[ 0.401931] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[ 0.401934] pnp 00:0d: [mem 0xfed90000-0xfed93fff]
[ 0.401938] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[ 0.401941] pnp 00:0d: [mem 0xff000000-0xffffffff]
[ 0.401948] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[ 0.401951] pnp 00:0d: [mem 0xdfa00000-0xdfa00fff]
[ 0.402051] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.402056] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.402061] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.402065] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.402070] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.402075] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.402080] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.402084] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.402089] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[ 0.402094] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.402099] system 00:0d: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.402105] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402342] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 0.402346] pnp 00:0e: [mem 0x40000000-0x401fffff]
[ 0.402441] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 0.402446] system 00:0e: [mem 0x40000000-0x401fffff] has been reserved
[ 0.402451] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402504] pnp: PnP ACPI: found 15 devices
[ 0.402507] ACPI: ACPI bus type pnp unregistered
[ 0.409665] PCI: max bus depth: 1 pci_try_num: 2
[ 0.409701] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.409712] pci 0000:00:01.2: PCI bridge to [bus 02-02]
[ 0.409723] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.409729] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.409737] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.409745] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.409777] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.409784] pci 0000:00:01.0: setting latency timer to 64
[ 0.409793] pci 0000:00:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.409798] pci 0000:00:01.2: setting latency timer to 64
[ 0.409808] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.409815] pci 0000:00:1c.0: setting latency timer to 64
[ 0.409822] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.409827] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.409831] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409835] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.409839] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.409843] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.409848] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.409852] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.409856] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.409861] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.409865] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.409870] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.409874] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.409929] NET: Registered protocol family 2
[ 0.410138] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.411493] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.414204] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.414499] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.414503] TCP reno registered
[ 0.414522] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.414558] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.414682] NET: Registered protocol family 1
[ 0.414712] pci 0000:00:02.0: Boot video device
[ 0.414733] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.436057] pci 0000:00:1a.0: PCI INT A disabled
[ 0.436095] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.456044] pci 0000:00:1d.0: PCI INT A disabled
[ 0.456067] PCI: CLS 64 bytes, default 64
[ 0.456071] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.456075] Placing 64MB software IO TLB between ffff8800c91ca000 - ffff8800cd1ca000
[ 0.456079] software IO TLB at phys 0xc91ca000 - 0xcd1ca000
[ 0.456673] audit: initializing netlink socket (disabled)
[ 0.456689] type=2000 audit(1396537024.452:1): initialized
[ 0.500511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503650] VFS: Disk quotas dquot_6.5.2
[ 0.503735] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.504514] fuse init (API version 7.17)
[ 0.504651] msgmni has been set to 7260
[ 0.505084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.505123] io scheduler noop registered
[ 0.505126] io scheduler deadline registered
[ 0.505177] io scheduler cfq registered (default)
[ 0.505310] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.505358] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.505434] pcieport 0000:00:01.2: setting latency timer to 64
[ 0.505473] pcieport 0000:00:01.2: irq 41 for MSI/MSI-X
[ 0.505629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.505661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.505746] intel_idle: MWAIT substates: 0x21120
[ 0.505749] intel_idle: v0.4 model 0x2A
[ 0.505752] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.505911] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.505921] ACPI: Power Button [PWRB]
[ 0.505991] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.505997] ACPI: Power Button [PWRF]
[ 0.506121] ACPI: Fan [FAN0] (off)
[ 0.506177] ACPI: Fan [FAN1] (off)
[ 0.506229] ACPI: Fan [FAN2] (off)
[ 0.506280] ACPI: Fan [FAN3] (off)
[ 0.506329] ACPI: Fan [FAN4] (off)
[ 0.528529] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.528535] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.528859] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.528863] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.528949] ERST: Table is not found!
[ 0.528952] GHES: HEST is not enabled!
[ 0.529070] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.870928] Freeing initrd memory: 19764k freed
[ 0.924694] Linux agpgart interface v0.103
[ 0.924815] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 0.925117] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.926878] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
[ 0.927042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.929222] brd: module loaded
[ 0.930361] loop: module loaded
[ 0.930559] ahci 0000:00:1f.2: version 3.0
[ 0.930585] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.930649] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.944059] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x35 impl SATA mode
[ 0.944068] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.944078] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.968849] scsi0 : ahci
[ 0.968997] scsi1 : ahci
[ 0.969120] scsi2 : ahci
[ 0.969234] scsi3 : ahci
[ 0.969351] scsi4 : ahci
[ 0.969462] scsi5 : ahci
[ 0.969960] ata1: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06100 irq 42
[ 0.969964] ata2: DUMMY
[ 0.969968] ata3: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06200 irq 42
[ 0.969972] ata4: DUMMY
[ 0.969976] ata5: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06300 irq 42
[ 0.969981] ata6: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06380 irq 42
[ 0.970555] Fixed MDIO Bus: probed
[ 0.970586] tun: Universal TUN/TAP device driver, 1.6
[ 0.970589] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.970697] PPP generic driver version 2.4.2
[ 0.970863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.970890] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.970923] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.970928] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.970999] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.971039] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.974928] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.974957] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d08000
[ 0.988026] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.988271] hub 1-0:1.0: USB hub found
[ 0.988279] hub 1-0:1.0: 2 ports detected
[ 0.988371] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.988399] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.988404] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.988474] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.988504] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.992383] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.992407] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d07000
[ 1.008027] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.008242] hub 2-0:1.0: USB hub found
[ 1.008248] hub 2-0:1.0: 2 ports detected
[ 1.008338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.008360] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.008430] usbcore: registered new interface driver libusual
[ 1.008495] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.008958] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.008967] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.009125] mousedev: PS/2 mouse device common for all mice
[ 1.009318] rtc_cmos 00:06: RTC can wake from S4
[ 1.009461] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.009495] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.009619] device-mapper: uevent: version 1.0.3
[ 1.009728] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.009842] cpuidle: using governor ladder
[ 1.010007] cpuidle: using governor menu
[ 1.010010] EFI Variables Facility v0.08 2004-May-17
[ 1.010328] TCP cubic registered
[ 1.010493] NET: Registered protocol family 10
[ 1.011140] NET: Registered protocol family 17
[ 1.011147] Registering the dns_resolver key type
[ 1.011558] PM: Hibernation image not present or could not be loaded.
[ 1.011584] registered taskstats version 1
[ 1.022656] Magic number: 10:139:990
[ 1.022810] rtc_cmos 00:06: setting system clock to 2014-04-03 14:57:06 UTC (1396537026)
[ 1.023368] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.023372] EDD information not available.
[ 1.026572] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.288111] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.288156] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.288188] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.294255] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.294268] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.294285] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.296124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.297825] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
[ 1.297972] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.297984] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.297993] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.299637] ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
[ 1.299648] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.300079] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.301611] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.301623] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.301632] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.303303] ata1.00: configured for UDMA/133
[ 1.303497] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
[ 1.303756] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.303919] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.303927] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.304215] sd 0:0:0:0: [sda] Write Protect is off
[ 1.304223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.304439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.306381] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.306393] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.306402] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.307591] ata5.00: configured for UDMA/133
[ 1.315062] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
[ 1.325459] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.325467] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.325831] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.326067] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.373717] sda: sda1 sda2 < sda5 >
[ 1.375141] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.377759] Freeing unused kernel memory: 924k freed
[ 1.377970] Write protecting the kernel read-only data: 12288k
[ 1.386715] Freeing unused kernel memory: 1592k freed
[ 1.393542] Freeing unused kernel memory: 1188k freed
[ 1.424166] udevd[99]: starting version 175
[ 1.432684] hub 1-1:1.0: USB hub found
[ 1.432741] hub 1-1:1.0: 4 ports detected
[ 1.484637] wmi: Mapper loaded
[ 1.539392] [drm] Initialized drm 1.1.0 20060810
[ 1.549417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.549449] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.549496] r8169 0000:03:00.0: setting latency timer to 64
[ 1.549579] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.550155] r8169 0000:03:00.0: eth0: RTL8105e at 0xffffc90000620000, ec:a8:6b:bc:a2:99, XID 00a00000 IRQ 43
[ 1.552071] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.556376] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.556385] i915 0000:00:02.0: setting latency timer to 64
[ 1.684673] hub 2-1:1.0: USB hub found
[ 1.684737] hub 2-1:1.0: 4 ports detected
[ 1.721144] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.721154] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.721157] [drm] Driver supports precise vblank timestamp query.
[ 1.721270] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 1.721300] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.956174] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2.041439] fbcon: inteldrmfb (fb0) is primary device
[ 2.041513] Console: switching to colour frame buffer device 170x48
[ 2.041552] fb0: inteldrmfb frame buffer device
[ 2.041555] drm: registered panic notifier
[ 2.054294] Initializing USB Mass Storage driver...
[ 2.054459] scsi6 : usb-storage 2-1.2:1.3
[ 2.054571] usbcore: registered new interface driver usb-storage
[ 2.054574] USB Mass Storage support registered.
[ 2.056162] fixme: max PWM is zero.
[ 2.056378] acpi device:49: registered as cooling_device7
[ 2.056755] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 2.056931] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.056972] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.744941] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.744948] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.053153] scsi 6:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5
[ 3.054651] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.057377] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 8.931269] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 8.931287] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4987085
[ 8.931386] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4987077
[ 8.931412] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12321354
[ 8.931437] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12321750
[ 8.931460] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12321207
[ 8.931483] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12320865
[ 8.931505] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12320835
[ 8.931585] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12320837
[ 8.931607] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12324662
[ 8.931630] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12325386
[ 8.931679] EXT4-fs (sda1): 10 orphan inodes deleted
[ 8.931682] EXT4-fs (sda1): recovery complete
[ 10.205744] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.811511] Adding 3879932k swap on /dev/sda5. Priority:-1 extents:1 across:3879932k
[ 18.820703] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.873627] udevd[381]: starting version 175
[ 18.962805] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.968810] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.968821] mei 0000:00:16.0: setting latency timer to 64
[ 18.968907] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 18.971691] lp: driver loaded but no devices found
[ 19.141746] type=1400 audit(1396537044.613:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=480 comm="apparmor_parser"
[ 19.142535] type=1400 audit(1396537044.613:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
[ 19.143004] type=1400 audit(1396537044.613:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
[ 19.143896] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 19.150934] type=1400 audit(1396537044.621:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=487 comm="apparmor_parser"
[ 19.171191] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.171277] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 19.171315] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 19.284795] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11
[ 19.285022] usbcore: registered new interface driver usblp
[ 19.400458] ppdev: user-space parallel port driver
[ 19.404372] Bluetooth: Core ver 2.16
[ 19.404410] NET: Registered protocol family 31
[ 19.404414] Bluetooth: HCI device and connection manager initialized
[ 19.404432] Bluetooth: HCI socket layer initialized
[ 19.404435] Bluetooth: L2CAP socket layer initialized
[ 19.404780] Bluetooth: SCO socket layer initialized
[ 19.421188] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.421196] Bluetooth: BNEP filters: protocol multicast
[ 19.426936] Bluetooth: RFCOMM TTY layer initialized
[ 19.426946] Bluetooth: RFCOMM socket layer initialized
[ 19.426950] Bluetooth: RFCOMM ver 1.11
[ 19.481023] type=1400 audit(1396537044.953:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=637 comm="apparmor_parser"
[ 19.482197] type=1400 audit(1396537044.953:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=637 comm="apparmor_parser"
[ 19.701641] init: failsafe main process (653) killed by TERM signal
[ 19.823529] type=1400 audit(1396537045.293:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=771 comm="apparmor_parser"
[ 19.833672] type=1400 audit(1396537045.305:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=770 comm="apparmor_parser"
[ 19.836944] type=1400 audit(1396537045.309:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=771 comm="apparmor_parser"
[ 19.837391] type=1400 audit(1396537045.309:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=771 comm="apparmor_parser"
[ 19.896049] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 20.149424] r8169 0000:03:00.0: eth0: link down
[ 20.149438] r8169 0000:03:00.0: eth0: link down
[ 20.150491] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.151103] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.545790] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 20.603989] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 10000000, was 12060000
[ 20.893666] init: plymouth-stop pre-start process (1072) terminated with status 1
[ 21.700774] r8169 0000:03:00.0: eth0: link up
[ 21.701356] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.368063] eth0: no IPv6 routers present
[ 60.142730] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 10070000, was 10000000
[ 65.084272] audit_printk_skb: 42 callbacks suppressed
[ 65.084279] type=1400 audit(1396537089.704:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=3158 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 443.011181] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 00070000, was 10070000
[21247.137767] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[21247.137778] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[21247.138793] CPU1: Package temperature/speed normal
[21247.138800] CPU0: Package temperature/speed normal
[21800.520309] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[21800.828571] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem.
[21800.828676] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
[21800.830574] cdc_acm 1-1.2:1.3: This device cannot do calls on its own. It is not a modem.
[21800.830678] cdc_acm 1-1.2:1.3: ttyACM1: USB ACM device
[21800.831055] usbcore: registered new interface driver cdc_acm
[21800.831061] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[21849.249449] usb 1-1.2: USB disconnect, device number 3
[21849.456203] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[21849.550759] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem.
[21849.550838] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
[21849.551565] cdc_acm 1-1.2:1.3: This device cannot do calls on its own. It is not a modem.
[21849.551644] cdc_acm 1-1.2:1.3: ttyACM1: USB ACM device
[26214.808349] usb 1-1.2: USB disconnect, device number 4
[26327.144304] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
[26327.240699] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem.
[26327.240780] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
[26327.241520] cdc_acm 1-1.2:1.3: This device cannot do calls on its own. It is not a modem.
[26327.241604] cdc_acm 1-1.2:1.3: ttyACM1: USB ACM device







Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts