gieri
(usa Linux Mint)
Enviado em 16/03/2015 - 09:14h
Estou com um problema, o Fedora 21 não instalou a placa de rede D-Link DFE-550TX.
Segue a saída de alguns comandos:
ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 187.12.177.42 netmask 255.255.255.0 broadcast 187.12.177.255
inet6 fe80::224:21ff:feff:6f86 prefixlen 64 scopeid 0x20<link>
ether 00:24:21:ff:6f:86 txqueuelen 1000 (Ethernet)
RX packets 18519 bytes 19229946 (18.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12518 bytes 1171754 (1.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.10.10.1 netmask 255.255.255.0 broadcast 10.10.10.255
inet6 fe80::2e0:5cff:fe00:19e9 prefixlen 64 scopeid 0x20<link>
ether 00:e0:5c:00:19:e9 txqueuelen 1000 (Ethernet)
RX packets 2161 bytes 239399 (233.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1325 bytes 885735 (864.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Loopback Local)
RX packets 52 bytes 4852 (4.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 52 bytes 4852 (4.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 5e:a7:46:8e:f7:7e txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6 bytes 549 (549.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 2] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
04:01.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15)
lspci -d 1186: -k -v
04:01.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15)
Subsystem: D-Link System Inc DFE-550TX/FX
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at ec00 [size=128]
Memory at febef800 (32-bit, non-prefetchable) [size=512]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Kernel modules: sundance
Como devo proceder para utiliza-la?