markinhos021
(usa Outra)
Enviado em 01/02/2012 - 12:48h
Aqui está o arquivo
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-13-generic (buildd@palmer) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #54-Ubuntu SMP Tue Jan 3 13:44:52 UTC 2012 (Ubuntu 2.6.38-13.54-generic 2.6.38.8)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. 945GZM-S2/945GZM-S2, BIOS F2 05/25/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1f7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C9FFF write-protect
[ 0.000000] CA000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f4c90] f4c90
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001f7f0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001f400000 page 2M
[ 0.000000] 001f400000 - 001f7f0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1f7f0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 1dd4b000 - 1efb3000
[ 0.000000] ACPI: RSDP 000f65c0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1f7f3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 1f7f30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 1f7f3180 03AAF (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 1f7f0000 00040
[ 0.000000] ACPI: HPET 1f7f6d40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 1f7f6dc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 1f7f6c80 00068 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f7f0000
[ 0.000000] low ram: 0 - 1f7f0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f7f0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f7f0
[ 0.000000] On node 0 totalpages: 128895
[ 0.000000] free_area_init_node: node 0, pgdat c1784140, node_mem_map df3ff200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 976 pages used for memmap
[ 0.000000] Normal zone: 123936 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1f800000 (gap: 1f800000:d0800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @dd800000 s28800 r0 d24448 u2097152
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127887
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-13-generic root=UUID=bb7b845e-45d4-40c3-b256-da214d39668d ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2579840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 480292k/516032k available (5190k kernel code, 35288k reserved, 2538k data, 700k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdfff0000 - 0xff7fe000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf7f0000 ( 503 MB)
[ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
[ 0.000000] .data : 0xc1511b51 - 0xc178c4c0 (2538 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1511b51 (5190 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=dd408000 soft=dd40a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1607.737 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3215.47 BogoMIPS (lpj=6430948)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004038] Security Framework initialized
[ 0.004055] AppArmor: AppArmor initialized
[ 0.004058] Yama: becoming mindful.
[ 0.004125] Mount-cache hash table entries: 512
[ 0.004281] Initializing cgroup subsys ns
[ 0.004286] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004291] Initializing cgroup subsys cpuacct
[ 0.004297] Initializing cgroup subsys memory
[ 0.004308] Initializing cgroup subsys devices
[ 0.004311] Initializing cgroup subsys freezer
[ 0.004313] Initializing cgroup subsys net_cls
[ 0.004317] Initializing cgroup subsys blkio
[ 0.004362] mce: CPU supports 6 MCE banks
[ 0.004373] CPU0: Thermal monitoring enabled (TM2)
[ 0.004378] using mwait in idle threads.
[ 0.005143] SMP alternatives: switching to UP code
[ 0.017839] ACPI: Core revision 20110112
[ 0.020968] ftrace: allocating 23652 entries in 47 pages
[ 0.024086] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065808] CPU0: Intel(R) Celeron(R) CPU 420 @ 1.60GHz stepping 01
[ 0.068003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] Brought up 1 CPUs
[ 0.068003] Total of 1 processors activated (3215.47 BogoMIPS).
[ 0.068003] devtmpfs: initialized
[ 0.068003] print_constraints: dummy:
[ 0.068003] Time: 12:41:41 Date: 02/01/12
[ 0.068003] NET: Registered protocol family 16
[ 0.068003] EISA bus registered
[ 0.068003] ACPI: bus type pci registered
[ 0.068003] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.068003] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.068003] PCI: Using MMCONFIG for extended config space
[ 0.068003] PCI: Using configuration type 1 for base access
[ 0.068518] bio: create slab <bio-0> at 0
[ 0.069449] ACPI: EC: Look up EC in DSDT
[ 0.073721] ACPI: Interpreter enabled
[ 0.073736] ACPI: (supports S0 S1 S4 S5)
[ 0.073762] ACPI: Using IOAPIC for interrupt routing
[ 0.079318] ACPI: No dock devices found.
[ 0.079322] HEST: Table not found.
[ 0.079329] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.079413] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.079564] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.079568] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.079572] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.079575] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.079579] pci_root PNP0A03:00: host bridge window [mem 0x1f800000-0xfebfffff] (ignored)
[ 0.079594] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
[ 0.079650] pci 0000:00:01.0: [8086:2771] type 1 class 0x000604
[ 0.079693] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.079697] pci 0000:00:01.0: PME# disabled
[ 0.079716] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300
[ 0.079729] pci 0000:00:02.0: reg 10: [mem 0xe2000000-0xe207ffff]
[ 0.079737] pci 0000:00:02.0: reg 14: [io 0xc000-0xc007]
[ 0.079745] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.079753] pci 0000:00:02.0: reg 1c: [mem 0xe2080000-0xe20bffff]
[ 0.079827] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.079845] pci 0000:00:1b.0: reg 10: [mem 0xe20c0000-0xe20c3fff 64bit]
[ 0.079908] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.079913] pci 0000:00:1b.0: PME# disabled
[ 0.079933] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.079979] pci 0000:00:1d.0: reg 20: [io 0xb000-0xb01f]
[ 0.080033] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.080079] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.080112] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.080157] pci 0000:00:1d.2: reg 20: [io 0xb800-0xb81f]
[ 0.080191] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.080236] pci 0000:00:1d.3: reg 20: [io 0xbc00-0xbc1f]
[ 0.080277] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.080296] pci 0000:00:1d.7: reg 10: [mem 0xe20c4000-0xe20c43ff]
[ 0.080384] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.080448] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[ 0.080538] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.080543] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.080583] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.080599] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.080609] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.080619] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.080629] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.080638] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.080672] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.080676] pci 0000:00:1f.2: PME# disabled
[ 0.080691] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.080747] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.080817] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.080822] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.080826] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.080833] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.080873] pci 0000:02:00.0: [1814:0301] type 0 class 0x000280
[ 0.080893] pci 0000:02:00.0: reg 10: [mem 0xe1000000-0xe1007fff]
[ 0.080990] pci 0000:02:05.0: [10ec:8167] type 0 class 0x000200
[ 0.081010] pci 0000:02:05.0: reg 10: [io 0xa000-0xa0ff]
[ 0.081021] pci 0000:02:05.0: reg 14: [mem 0xe1008000-0xe10080ff]
[ 0.081068] pci 0000:02:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.081089] pci 0000:02:05.0: supports D1 D2
[ 0.081092] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.081098] pci 0000:02:05.0: PME# disabled
[ 0.081141] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.081147] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.081152] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe1ffffff]
[ 0.081159] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.081163] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.081166] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.081178] pci_bus 0000:00: on NUMA node 0
[ 0.081183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.081450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.081675] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.089838] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.089907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.089974] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.090038] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.090103] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.090167] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.090231] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.090297] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.090437] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.090447] vgaarb: loaded
[ 0.090728] SCSI subsystem initialized
[ 0.090809] libata version 3.00 loaded.
[ 0.090886] usbcore: registered new interface driver usbfs
[ 0.090905] usbcore: registered new interface driver hub
[ 0.090949] usbcore: registered new device driver usb
[ 0.091101] wmi: Mapper loaded
[ 0.091104] PCI: Using ACPI for IRQ routing
[ 0.091108] PCI: pci_cache_line_size set to 64 bytes
[ 0.091170] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.091174] reserve RAM buffer: 000000001f7f0000 - 000000001fffffff
[ 0.091311] NetLabel: Initializing
[ 0.091313] NetLabel: domain hash size = 128
[ 0.091315] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.091329] NetLabel: unlabeled traffic allowed by default
[ 0.091390] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.091396] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.091402] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.096076] Switching to clocksource hpet
[ 0.099971] Switched to NOHz mode on CPU #0
[ 0.104643] AppArmor: AppArmor Filesystem Enabled
[ 0.104691] pnp: PnP ACPI init
[ 0.104722] ACPI: bus type pnp registered
[ 0.104852] pnp 00:00: [bus 00-3f]
[ 0.104855] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.104859] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.104862] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.104865] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.104869] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.104872] pnp 00:00: [mem 0x1f800000-0xfebfffff window]
[ 0.104950] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.105034] pnp 00:01: [io 0x0010-0x001f]
[ 0.105037] pnp 00:01: [io 0x0022-0x003f]
[ 0.105040] pnp 00:01: [io 0x0044-0x005f]
[ 0.105046] pnp 00:01: [io 0x0062-0x0063]
[ 0.105049] pnp 00:01: [io 0x0065-0x006f]
[ 0.105051] pnp 00:01: [io 0x0074-0x007f]
[ 0.105054] pnp 00:01: [io 0x0091-0x0093]
[ 0.105056] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.105059] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.105062] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.105064] pnp 00:01: [io 0x0290-0x029f]
[ 0.105067] pnp 00:01: [io 0x0800-0x087f]
[ 0.105070] pnp 00:01: [io 0x0290-0x0294]
[ 0.105072] pnp 00:01: [io 0x0880-0x088f]
[ 0.105146] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.105150] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.105154] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.105158] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.105161] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.105166] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.105184] pnp 00:02: [dma 4]
[ 0.105187] pnp 00:02: [io 0x0000-0x000f]
[ 0.105189] pnp 00:02: [io 0x0080-0x0090]
[ 0.105192] pnp 00:02: [io 0x0094-0x009f]
[ 0.105195] pnp 00:02: [io 0x00c0-0x00df]
[ 0.105236] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.105252] pnp 00:03: [io 0x0070-0x0073]
[ 0.105266] pnp 00:03: [irq 8]
[ 0.105305] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.105318] pnp 00:04: [io 0x0061]
[ 0.105356] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.105369] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.105377] pnp 00:05: [irq 13]
[ 0.105420] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.105582] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.105585] pnp 00:06: [io 0x03f7]
[ 0.105593] pnp 00:06: [irq 6]
[ 0.105596] pnp 00:06: [dma 2]
[ 0.105657] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.105872] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.105880] pnp 00:07: [irq 4]
[ 0.105958] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.106190] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.106199] pnp 00:08: [irq 3]
[ 0.106281] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.106531] pnp 00:09: [io 0x0378-0x037f]
[ 0.106540] pnp 00:09: [irq 7]
[ 0.106612] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.106750] pnp 00:0a: [irq 12]
[ 0.106795] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.106830] pnp 00:0b: [io 0x0060]
[ 0.106833] pnp 00:0b: [io 0x0064]
[ 0.106840] pnp 00:0b: [irq 1]
[ 0.106884] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.106931] pnp 00:0c: [io 0x0400-0x04bf]
[ 0.106999] system 00:0c: [io 0x0400-0x04bf] has been reserved
[ 0.107004] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107275] pnp 00:0d: [mem 0xf0000000-0xf3ffffff]
[ 0.107352] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.107357] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107581] pnp 00:0e: [mem 0x000ca800-0x000cbfff]
[ 0.107589] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[ 0.107592] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[ 0.107595] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[ 0.107598] pnp 00:0e: [mem 0x1f7f0000-0x1f7fffff]
[ 0.107601] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.107603] pnp 00:0e: [mem 0x00100000-0x1f7effff]
[ 0.107606] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 0.107609] pnp 00:0e: [mem 0xfed13000-0xfed1dfff]
[ 0.107612] pnp 00:0e: [mem 0xfed20000-0xfed8ffff]
[ 0.107615] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.107618] pnp 00:0e: [mem 0xffb00000-0xffb7ffff]
[ 0.107621] pnp 00:0e: [mem 0xfff00000-0xffffffff]
[ 0.107623] pnp 00:0e: [mem 0x000e0000-0x000effff]
[ 0.107710] system 00:0e: [mem 0x000ca800-0x000cbfff] has been reserved
[ 0.107715] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.107718] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.107722] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.107726] system 00:0e: [mem 0x1f7f0000-0x1f7fffff] could not be reserved
[ 0.107730] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.107734] system 00:0e: [mem 0x00100000-0x1f7effff] could not be reserved
[ 0.107738] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.107742] system 00:0e: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.107745] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.107749] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.107753] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.107757] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.107760] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved
[ 0.107765] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.107796] pnp 00:0f: [mem 0xffb80000-0xffbfffff]
[ 0.107858] pnp 00:0f: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.107866] pnp: PnP ACPI: found 16 devices
[ 0.107868] ACPI: ACPI bus type pnp unregistered
[ 0.107875] PnPBIOS: Disabled by ACPI PNP
[ 0.144809] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x200fffff pref]
[ 0.144814] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.144818] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.144823] pci 0000:00:01.0: bridge window [mem disabled]
[ 0.144827] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 0.144834] pci 0000:02:05.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
[ 0.144838] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.144842] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.144848] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe1ffffff]
[ 0.144853] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x200fffff pref]
[ 0.144880] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.144886] pci 0000:00:01.0: setting latency timer to 64
[ 0.144895] pci 0000:00:1e.0: setting latency timer to 64
[ 0.144900] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.144903] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.144907] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.144910] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.144914] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe1ffffff]
[ 0.144917] pci_bus 0000:02: resource 2 [mem 0x20000000-0x200fffff pref]
[ 0.144920] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.144924] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.144970] NET: Registered protocol family 2
[ 0.145047] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.145261] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.145332] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.145398] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.145401] TCP reno registered
[ 0.145405] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.145412] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.145502] NET: Registered protocol family 1
[ 0.145524] pci 0000:00:02.0: Boot video device
[ 0.145630] PCI: CLS 32 bytes, default 64
[ 0.145914] cpufreq-nforce2: No nForce2 chipset.
[ 0.146097] audit: initializing netlink socket (disabled)
[ 0.146111] type=2000 audit(1328100101.140:1): initialized
[ 0.158147] Trying to unpack rootfs image as initramfs...
[ 0.176552] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.184552] VFS: Disk quotas dquot_6.5.2
[ 0.184649] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.185608] fuse init (API version 7.16)
[ 0.185756] msgmni has been set to 938
[ 0.192286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.192333] io scheduler noop registered
[ 0.192335] io scheduler deadline registered
[ 0.192365] io scheduler cfq registered (default)
[ 0.192506] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.192553] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.192649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.192681] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.192790] intel_idle: MWAIT substates: 0x220
[ 0.192793] intel_idle: does not run on family 6 model 22
[ 0.192906] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.192913] ACPI: Power Button [PWRB]
[ 0.192989] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.192994] ACPI: Power Button [PWRF]
[ 0.193199] ACPI: acpi_idle registered with cpuidle
[ 0.194869] ERST: Table is not found!
[ 0.194983] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.215387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.220242] isapnp: Scanning for PnP cards...
[ 0.304839] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.349884] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.432918] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.456625] Linux agpgart interface v0.103
[ 0.456700] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 0.456785] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.456902] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.457029] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.458681] brd: module loaded
[ 0.459463] loop: module loaded
[ 0.459608] i2c-core: driver [adp5520] using legacy suspend method
[ 0.459611] i2c-core: driver [adp5520] using legacy resume method
[ 0.459752] ata_piix 0000:00:1f.2: version 2.13
[ 0.459787] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.459793] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.459839] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.464629] scsi0 : ata_piix
[ 0.464776] scsi1 : ata_piix
[ 0.465562] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.465567] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.466092] Fixed MDIO Bus: probed
[ 0.466145] PPP generic driver version 2.4.2
[ 0.466238] tun: Universal TUN/TAP device driver, 1.6
[ 0.466240] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.466378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.466422] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.466443] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.466448] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.466519] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.466548] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.470452] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.520455] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe20c4000
[ 0.540306] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.540540] hub 1-0:1.0: USB hub found
[ 0.540546] hub 1-0:1.0: 8 ports detected
[ 0.540651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.540672] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.540733] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.540743] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.540748] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.540818] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.540850] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 0.541026] hub 2-0:1.0: USB hub found
[ 0.541033] hub 2-0:1.0: 2 ports detected
[ 0.541113] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.541122] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.541126] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.541196] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.541238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.541404] hub 3-0:1.0: USB hub found
[ 0.541410] hub 3-0:1.0: 2 ports detected
[ 0.541500] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.541511] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.541515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.541580] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.541620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 0.541783] hub 4-0:1.0: USB hub found
[ 0.541788] hub 4-0:1.0: 2 ports detected
[ 0.541867] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.541874] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.541879] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.541939] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.541982] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.542147] hub 5-0:1.0: USB hub found
[ 0.542153] hub 5-0:1.0: 2 ports detected
[ 0.542330] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.548170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.548188] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.548426] mousedev: PS/2 mouse device common for all mice
[ 0.548649] rtc_cmos 00:03: RTC can wake from S4
[ 0.548724] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.548752] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.548894] device-mapper: uevent: version 1.0.3
[ 0.549015] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.549114] device-mapper: multipath: version 1.2.0 loaded
[ 0.549118] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.549236] EISA: Probing bus 0 at eisa.0
[ 0.549266] EISA: Detected 0 cards.
[ 0.549336] cpuidle: using governor ladder
[ 0.549339] cpuidle: using governor menu
[ 0.549645] TCP cubic registered
[ 0.549831] NET: Registered protocol family 10
[ 0.550440] NET: Registered protocol family 17
[ 0.550467] Registering the dns_resolver key type
[ 0.550525] Using IPI No-Shortcut mode
[ 0.550676] PM: Hibernation image not present or could not be loaded.
[ 0.550690] registered taskstats version 1
[ 0.550897] Magic number: 0:453:682
[ 0.551022] rtc_cmos 00:03: setting system clock to 2012-02-01 12:41:42 UTC (1328100102)
[ 0.551027] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.551029] EDD information not available.
[ 0.566698] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.796286] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
[ 0.843829] isapnp: No Plug & Play device found
[ 0.843886] ata1.00: HPA detected: current 312497887, native 312500000
[ 0.843895] ata1.00: ATA-7: WDC WD1600AAJS-75PSA0, 05.06H05, max UDMA/133
[ 0.843899] ata1.00: 312497887 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.884560] ata2.00: configured for UDMA/66
[ 0.893294] ata1.00: configured for UDMA/133
[ 0.893478] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-7 05.0 PQ: 0 ANSI: 5
[ 0.893724] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.893976] sd 0:0:0:0: [sda] 312497887 512-byte logical blocks: (159 GB/149 GiB)
[ 0.894044] sd 0:0:0:0: [sda] Write Protect is off
[ 0.894048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.894078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.895449] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
[ 0.898347] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.898352] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.898539] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.898652] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.949100] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 0.949665] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.144364] Refined TSC clocksource calibration: 1607.727 MHz.
[ 1.144372] Switching to clocksource tsc
[ 1.196446] Freeing initrd memory: 18848k freed
[ 1.205993] Freeing unused kernel memory: 700k freed
[ 1.206362] Write protecting the kernel text: 5192k
[ 1.206399] Write protecting the kernel read-only data: 2152k
[ 1.239690] ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
[ 1.239692] Using default: (25% of RAM).
[ 1.239695] ramzswap: disk size set to 124956 kB
[ 1.249394] <30>udev[72]: starting version 167
[ 1.384045] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 1.520987] Floppy drive(s): fd0 is 1.44M
[ 1.539724] FDC 0 is a post-1991 82077
[ 1.559436] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.559473] r8169 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.559503] r8169 0000:02:05.0: (unregistered net_device): no PCI Express capability
[ 1.587492] [drm] Initialized drm 1.1.0 20060810
[ 1.602480] r8169 0000:02:05.0: eth0: RTL8169sc/8110sc at 0xe0020000, 00:1d:7d:8d:b0:d7, XID 18000000 IRQ 21
[ 1.681960] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.681968] i915 0000:00:02.0: setting latency timer to 64
[ 1.703132] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.703137] [drm] Driver supports precise vblank timestamp query.
[ 1.705885] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.706309] [drm] initialized overlay support
[ 1.771288] fbcon: inteldrmfb (fb0) is primary device
[ 1.772129] Console: switching to colour frame buffer device 128x48
[ 1.772196] fb0: inteldrmfb frame buffer device
[ 1.772199] drm: registered panic notifier
[ 1.772468] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.495011] Btrfs loaded
[ 3.504784] xor: automatically using best checksumming function: pIII_sse
[ 3.524005] pIII_sse : 5562.000 MB/sec
[ 3.524008] xor: using function: pIII_sse (5562.000 MB/sec)
[ 3.529938] device-mapper: dm-raid45: initialized v0.2594b
[ 16.220547] end_request: I/O error, dev fd0, sector 0
[ 16.356990] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 23.273385] Adding 1952764k swap on /dev/sda6. Priority:-1 extents:1 across:1952764k
[ 23.337046] <30>udev[325]: starting version 167
[ 23.393415] lp: driver loaded but no devices found
[ 23.428601] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 23.745089] type=1400 audit(1328107325.691:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=444 comm="apparmor_parser"
[ 23.749773] type=1400 audit(1328107325.695:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
[ 23.750528] type=1400 audit(1328107325.695:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
[ 23.776335] type=1400 audit(1328107325.723:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=447 comm="apparmor_parser"
[ 24.218442] r8169 0000:02:05.0: eth0: link down
[ 24.224145] intel_rng: FWH not detected
[ 24.232162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.354949] leds_ss4200: no LED devices found
[ 24.376662] parport_pc 00:09: reported by Plug and Play ACPI
[ 24.376712] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 24.498948] lp0: using parport0 (interrupt-driven).
[ 24.703077] psmouse serio1: ID: 10 00 64
[ 24.760813] logips2pp: Detected unknown logitech mouse model 34
[ 25.185544] type=1400 audit(1328107327.131:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=609 comm="apparmor_parser"
[ 25.193107] type=1400 audit(1328107327.139:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=609 comm="apparmor_parser"
[ 25.193871] type=1400 audit(1328107327.139:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=609 comm="apparmor_parser"
[ 25.197551] cfg80211: Calling CRDA to update world regulatory domain
[ 25.197678] Linux video capture interface: v2.00
[ 25.239814] type=1400 audit(1328107327.183:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=611 comm="apparmor_parser"
[ 25.270801] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 25.307712] type=1400 audit(1328107327.251:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=611 comm="apparmor_parser"
[ 25.347530] type=1400 audit(1328107327.291:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=611 comm="apparmor_parser"
[ 25.588648] uvcvideo: Found UVC 1.00 device USB Web-CAM (04fc:2001)
[ 25.791352] input: USB Web-CAM as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 25.794060] usbcore: registered new interface driver uvcvideo
[ 25.794066] USB Video Class driver (v1.0.0)
[ 26.139632] ppdev: user-space parallel port driver
[ 26.141045] cfg80211: World regulatory domain updated:
[ 26.141050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 26.141055] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.141058] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 26.141062] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 26.141065] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.141069] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.409551] rt61pci 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 26.420941] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 26.420947] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.420950] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 26.420954] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.420957] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 26.420960] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.420963] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 26.420967] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.420970] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 26.420973] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.420976] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 26.420980] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.420983] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421012] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421016] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421019] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421022] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421025] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421028] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421032] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421035] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421038] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421041] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421045] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421048] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421052] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.421055] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 26.421058] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 26.496543] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 26.501143] Registered led device: rt61pci-phy0::radio
[ 26.504374] Registered led device: rt61pci-phy0::assoc
[ 26.557406] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.557480] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 26.557511] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 26.692321] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.562840] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 28.873149] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 29.073393] wlan0: authenticate with 00:27:22:08:b3:ae (try 1)
[ 29.074947] wlan0: authenticated
[ 29.074976] wlan0: associate with 00:27:22:08:b3:ae (try 1)
[ 29.080725] wlan0: RX AssocResp from 00:27:22:08:b3:ae (capab=0x21 status=0 aid=1)
[ 29.080731] wlan0: associated
[ 29.081231] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.619560] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 39.984036] wlan0: no IPv6 routers present
