slackware_explor
(usa Slackware)
Enviado em 13/12/2008 - 12:28h
Você deve executar o comando
# pppoe-setup
USER NAME
>>> Enter your PPPoE user name (default "Digite seu email completo ex:xxxxxxx@xxxxx.com.br"):
INTERFACE
>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0 "Como vc so tem um placa aperte ENTER"):
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no "Aperte ENTER"):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here("Se for Speedy digite"): 200.204.0.10
Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
>>> Enter the secondary DNS server address here("Se for Speedy digite"): 200.204.0.138
PASSWORD ("Aqui voce coloca sua senha e depois confirma")
>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):"Eu escolho o 1"
** Summary of what you entered **
Ethernet Interface: eth0
User name: xxxxxxxxxxx@xxxxxxxxxxxx.com.br
Activate-on-demand: No
Primary DNS: 200.204.0.10
Secondary DNS: 200.204.0.138
Firewalling: STANDALONE
>>> Accept these settings and adjust configuration files (y/n)? "Agora vc coloca "y" para confinarmar"
Para conectar vc digitar
# pppoe-start
para desconectar
# pppoe-stop
Caso vc faca isso e nao funcione digite
# ifconfig eth0 down
# ifconfig eth0 up
e tente novamente.
Tomara que ajude.
