Firmware failed to load

fernandojsouza

Já lancei os comandos "dmesg | grep ATH3K e sudo apt-get install -y firmware-atheros", mas continua aparecendo

/dev/sda7:clean, 335191/1831424 files, 2170670/7324160 blocks

7.337181 tpm_crb MSFT0101:00: can't request region forresources men 0xfed 

Olá fernandojsouza!

Vamos às respostas:

Na partição sda7 está a raiz do debian e na sda9 o /home

bruno@debian:~$ sudo fdisk -l

Disco /dev/sda: 931,5 GiB, 1000204886016 bytes, 1953525168 setores

Unidades: setor de 1 * 512 = 512 bytes

Tamanho de setor (lógico/físico): 512 bytes / 4096 bytes

Tamanho E/S (mínimo/ótimo): 4096 bytes / 4096 bytes

Tipo de rótulo do disco: gpt

Identificador do disco: EE10E9DC-15B6-4C41-80E7-F52B20E850F3



Dispositivo     Início        Fim   Setores Tamanho Tipo

/dev/sda1         2048     534527    532480    260M Sistema EFI

/dev/sda2       534528     567295     32768     16M Microsoft reservado

/dev/sda3       567296  780388351 779821056  371,9G Microsoft dados básico

/dev/sda4    780388352  781410303   1021952    499M Windows ambiente de recupera

/dev/sda5    781410304  879066553  97656250   46,6G Microsoft dados básico

/dev/sda6    879067136  975536127  96468992     46G Linux sistema de arquivos

/dev/sda7    975536128 1034129407  58593280     28G Linux sistema de arquivos

/dev/sda8   1034129408 1046499327  12369920    5,9G Linux swap

/dev/sda9   1046499328 1953523711 907024384  432,5G Linux sistema de arquivos

bruno@debian:~$ 

 

bruno@debian:~$     sudo smartctl --all /dev/sda

[sudo] senha para bruno: 

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-2-amd64] (local build)

Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org



=== START OF INFORMATION SECTION ===

Model Family:     HGST Travelstar Z5K1000

Device Model:     HGST HTS541010A7E630

Serial Number:    S0A001SSHW8R5K

LU WWN Device Id: 5 000cca 756da7e3d

Firmware Version: SE0OA4A0

User Capacity:    1.000.204.886.016 bytes [1,00 TB]

Sector Sizes:     512 bytes logical, 4096 bytes physical

Rotation Rate:    5400 rpm

Form Factor:      2.5 inches

Device is:        In smartctl database [for details use: -P show]

ATA Version is:   ATA8-ACS T13/1699-D revision 6

SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is:    Tue Dec 27 08:54:39 2016 BRST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled



=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED



General SMART Values:

Offline data collection status:  (0x00)	Offline data collection activity

					was never started.

					Auto Offline Data Collection: Disabled.

Self-test execution status:      (   0)	The previous self-test routine completed

					without error or no self-test has ever 

					been run.

Total time to complete Offline 

data collection: 		(   45) seconds.

Offline data collection

capabilities: 			 (0x5b) SMART execute Offline immediate.

					Auto Offline data collection on/off support.

					Suspend Offline collection upon new

					command.

					Offline surface scan supported.

					Self-test supported.

					No Conveyance Self-test supported.

					Selective Self-test supported.

SMART capabilities:            (0x0003)	Saves SMART data before entering

					power-saving mode.

					Supports SMART auto save timer.

Error logging capability:        (0x01)	Error logging supported.

					General Purpose Logging supported.

Short self-test routine 

recommended polling time: 	 (   2) minutes.

Extended self-test routine

recommended polling time: 	 ( 224) minutes.

SCT capabilities: 	       (0x003d)	SCT Status supported.

					SCT Error Recovery Control supported.

					SCT Feature Control supported.

					SCT Data Table supported.



SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0

  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0

  3 Spin_Up_Time            0x0007   139   139   033    Pre-fail  Always       -       1

  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       1016

  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0

  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0

  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0

  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       147

 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0

 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       371

191 G-Sense_Error_Rate      0x000a   099   099   000    Old_age   Always       -       65537

192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       110

193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       3921

194 Temperature_Celsius     0x0002   181   181   000    Old_age   Always       -       33 (Min/Max 17/40)

196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0

197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0

198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0

199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0



SMART Error Log Version: 1

No Errors Logged



SMART Self-test log structure revision number 1

No self-tests have been logged.  [To run self-tests, use: smartctl -t]



SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.



bruno@debian:~$ 

 

Quanto ao resto do teu texto fernandojsouza, ainda estou estudando e tentando entender para fazer os testes aqui no notebook. Assim que conseguir, posto novidades.