Pensei que o antivírus estivesse degradando o HD ( EDITADO ) [RESOLVIDO]

Cabreuvas escreveu:

Tu testou com uma distro ou kernel diferentes? As vezes pode até ser alguma coisa do kernel mesmo. Não vejo explicação técnica para o Linux estar dando tanto trabalho para o HD.

zezaocapoeira escreveu:

Salve mano.

Cara leia e entenda o conteúdo abaixo, será mais produtivo para você:

https://www.kernel.org/doc/Documentation/block/
https://www.kernel.org/doc/Documentation/filesystems/


OBS:

Você ao menos verificou os links acima tá tudo bem desenhado/explicado.



Obrigado pela atenção, salve!!!

Henrique - RJ escreveu:



Eu já acessei várias vezes esses links e o que vi foi um monte de txts em inglês que nem saberia por onde começar.

Achei que aqui seria muito mais fácil a partir do pessoal mais acostumado em Linux ( quem sabe até programadores ).

zezaocapoeira escreveu:

Salve mano.

Abra cada arquivo um por um em uma nova guia , e leia/entenda.

Use o google tradutor.

Obrigado pela atenção, salve!!!

Henrique - RJ escreveu:



Aqueles textos devem ser mais destinados a especialistas com muitos termos técnicos.

Eu vou certamente ficar sem entender muita coisa e ainda pra mais em inglês traduzido pelo Google.

zezaocapoeira escreveu:

Salve mano.

O que o pessoal explicou, e você ignorou, tá tudo lá .

Tudo bem documentado, o que cada pedaço de arquivo faz e sua função.

Basta querer aprender.

Obrigado pela atenção, salve!!!

Henrique - RJ escreveu:



Dei uma olhada rápida e é o que acabei de afirmar, aquilo é muito enrolado e disperso pra mim.

Preciso de explicações mastigadas se não fico sem entender.

Além disso, aquele material não vai dizer porque o meu sistema mata dependências de processos carregados na memória ( desconfio ).

Statistics for /media/sda5

Total Files: 640440
Total Fragmented Files: 660
Total Fragments: 1562
Fragments per Fragmented File: 2.36666666666667

File Fragmentation Rate: 0.103054150271688 %
Avg File Fragments (1 is best): 1.0024389482231

Most Fragmented Files(for details see /tmp/frags-result):
/media/sda5/var/lib/smartmontools/attrlog.Maxtor_6L080L0-L242QXWG.ata.csv: 178 extents found
/media/sda5/var/log/samba/log.%m: 101 extents found
/media/sda5/var/log/wtmp.1: 67 extents found
/media/sda5/home/henrique/.thunderbird/mk5lh3tf.default/ImapMail/imap.gmail.com/[Gmail].sbd/Todos os e-mails: 30 extents found
/media/sda5/home/henrique/.config/chromium/Default/Extension State/000003.log: 28 extents found
/media/sda5/var/log/pm-powersave.log.1: 24 extents found
/media/sda5/var/log/samba/log.wb-KAIANA: 22 extents found
/media/sda5/opt/sophos-av/log/savd.log: 21 extents found
/media/sda5/var/log/ufw.log.1: 20 extents found
/media/sda5/var/mail/nobody: 19 extents found

You do not need a defragmentation!

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-141-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax 10 (ATA/133 and SATA/150)
Device Model: Maxtor 6L080L0
Serial Number: L242QXWG
Firmware Version: BAJ41G20
User Capacity: 81,963,220,480 bytes [81.9 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Tue Feb 6 12:09:52 2018 -02
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 841) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 37) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 228 227 063 Pre-fail Always - 6402
4 Start_Stop_Count 0x0032 251 251 000 Old_age Always - 4510
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 2
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 243 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 246 238 187 Pre-fail Always - 38143
9 Power_On_Minutes 0x0032 200 200 000 Old_age Always - 995h+00m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 241 241 000 Old_age Always - 4863
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 038 253 000 Old_age Always - 38
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 519
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 241 241 000 Old_age Offline - 151
210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0
212 Unknown_Attribute 0x0032 253 249 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 183 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 183 occurred at disk power-on lifetime: 6362 hours (265 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 3f 00 60 e0 Error: UNC 8 sectors at LBA = 0x0060003f = 6291519

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 3f 00 60 e0 00 00:03:43.485 READ DMA
c8 d8 08 af 7a 61 e0 00 00:03:41.951 READ DMA
c8 d8 08 af 7a 61 e0 00 00:03:40.517 READ DMA
c8 d8 08 cf 5f 5f e0 00 00:03:40.517 READ DMA
c8 d8 08 27 a2 61 e0 00 00:03:40.517 READ DMA

Error 182 occurred at disk power-on lifetime: 6362 hours (265 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 af 7a 61 e0 Error: UNC 8 sectors at LBA = 0x00617aaf = 6388399

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 af 7a 61 e0 00 00:03:41.951 READ DMA
c8 d8 08 af 7a 61 e0 00 00:03:40.517 READ DMA
c8 d8 08 cf 5f 5f e0 00 00:03:40.517 READ DMA
c8 d8 08 27 a2 61 e0 00 00:03:40.517 READ DMA
c8 d8 08 e7 a1 61 e0 00 00:03:40.509 READ DMA

Error 181 occurred at disk power-on lifetime: 6362 hours (265 days + 2 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 3f 00 60 e0 Error: UNC 8 sectors at LBA = 0x0060003f = 6291519

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 3f 00 60 e0 00 00:01:43.827 READ DMA
c8 d8 08 af 7a 61 e0 00 00:01:42.302 READ DMA
c8 d8 08 af 7a 61 e0 00 00:01:40.868 READ DMA
c8 d8 08 cf 5f 5f e0 00 00:01:40.868 READ DMA
c8 d8 08 27 a2 61 e0 00 00:01:40.868 READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.