Samba 4 no Debian 8 [RESOLVIDO]

Mutano_1
(usa Debian)

Enviado em 07/08/2017 - 09:10h

Bom dia galeraaaaaa, bom me falaram que tem como fazer só pelo smb.conf da forma que eu quero:
Quero que quando o usuário windows entrar em meus locais de rede, ele veja servidor.
clique sem pedir senha, pois a maquina dele já vai estar cadastrada por mac de rede, mas quando o usuário clica na pasta que ele quer entrar, só entra se tiver a senha, pedindo a senha.
Isso é possível mesmo, só pelo smb.conf. Abaixo o meu.
[global]
workgroup = #############
netbios name = #########
interfaces = lo eth0 eth1
security = USER
username level = 3
max log size = 50
keepalive = 20
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
domain master = No
dns proxy = No
wins support = Yes
dns forwarder = #######
idmap_ldb:use rfc2307 = yes
idmap config * : backend = tdb
admin users = infra
read only = No
max connections = 100

[home]
comment = diretorio home
path = /home
available = No

[dados]
comment = area publica
path = /home/dados
write list = infra lucas max @cpd
guest ok = Yes
hosts allow = #######
veto files = /*.mp3/*.com/*.scr/*.pif/*.bat/*.wma/*.avi/*.mpg/*.flv /*.{*}

[infra]
comment = infra
path = /home/infra
write list = @cpd
invalid users = lucas
available = Yes

[lucas]
comment = lucas
path = /home/lucas
write list = @cpd lucas
available = Yes

[max]
comment = max
path = /home/max
write list = @cpd lucas max
available = Yes

JJSantos
(usa Gentoo)

Enviado em 07/08/2017 - 12:51h

Veja esse smb.conf está comentado, caso tenha duvidas posta ai.

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options (perhaps too

# many!) most of which are not shown in this example

#

# For a step to step guide on installing, configuring and using samba, 

# read the Samba-HOWTO-Collection. This may be obtained from:

#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf

#

# Many working examples of smb.conf files can be found in the 

# Samba-Guide which is generated daily and can be downloaded from: 

#  http://www.samba.org/samba/docs/Samba-Guide.pdf

#

# Any line which starts with a ; (semi-colon) or a # (hash) 

# is a comment and is ignored. In this example we will use a #

# for commentry and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command "testparm"

# to check that you have not made any basic syntactic errors. 

#

#======================= Global Settings =====================================

[global]



# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH

workgroup = workgroup



# server string is the equivalent of the NT Description field

server string = srv0702



# Name visible in Network

netbios name = srv0702



# Security mode. Defines in which mode Samba will operate. Possible 

# values are share, user, server, domain and ads. Most people will want 

# user level security. See the Samba-HOWTO-Collection for details.

security = user



# Encrypts passwords

encrypt passwords = true



# User with root power

admin users = adminsamba



# Prevents the recording files

veto files = /*.pif/*.bat/*.exe/*.msi/*.tif/*.jpg/*.jpeg/*.png/*.bmp/*.gif/*.pptx/*.mp3/*.wma/*.wmv/*.mp4/*.flv/*.aac/*.sfx/*.xlt/*.odg/*.xlsx/*.mkv/*.pif/*.avi/



# Preserve the name of the file sent by the station

preserve case = yes

default case = lower



# Password with at least 6 characters

# password level = 6



# Allows you to restrict by interface

bind interfaces only = yes



# Checks the connection every 20 seconds

keepalive = 20



# Where the error log will be written

panic action = echo `date` > /var/log/samba/panic.log



# Improves network performance

# log level = 1

# socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# read raw = yes

# write raw = yes

# kernel oplocks = yes

# max xmit = 65535

# deadtime = 15

# getwd cache = yes



# Coding Standard

unix charset = iso8859-1

display charset = cp850



# This option is important for security. It allows you to restrict

# connections to machines which are on your local network. The

# following example restricts access to two C class networks and

# the "loopback" interface. For more examples of the syntax see

# the smb.conf man page

;   hosts deny = ALL

;   hosts allow = 10.0.7.1/24



# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

load printers = yes



# you may wish to override the location of the printcap file

;   printcap name = /etc/printcap



# on SystemV system setting printcap name to lpstat should allow

# you to automatically obtain a printer list from the SystemV spool

# system

;   printcap name = lpstat



# It should not be necessary to specify the print system type unless

# it is non-standard. Currently supported print systems include:

# bsd, cups, sysv, plp, lprng, aix, hpux, qnx

;   printing = cups



# Uncomment this if you want a guest account, you must add this to /etc/passwd

# otherwise the user "nobody" is used

;  guest account = pcguest



# this tells Samba to use a separate log file for each machine

# that connects

log file = /var/log/samba/full_audit.log



# Put a capping on the size of the log files (in Kb).

max log size = 50



# Use password server option only with security = server

# The argument list may include:

# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]

# or to auto-locate the domain controller/s

# password server = *

;   password server = <NT-Server-Name>



# Use the realm option only with security = ads

# Specifies the Active Directory realm the host is part of

;   realm = MY_REALM



# Backend to store user information in. New installations should 

# use either tdbsam or ldapsam. smbpasswd is available for backwards 

# compatibility. tdbsam requires no further configuration. If you're 

# migrating from < samba 3.4, you'll have to convert your old user 

# passwords to the new backend with the command:

# pdbedit -i smbpasswd:/var/lib/samba/private/smbpasswd -e

;   passdb backend = tdbsam



# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting.

# Note: Consider carefully the location in the configuration file of

#       this line.  The included file is read at that point.

;   include = /etc/samba/smb.conf.%m



# Configure Samba to use multiple interfaces

# If you have multiple network interfaces then you must list them

# here. See the man page for details.

;   interfaces = eth0, lo, enp2s0,



# Browser Control Options:

# set local master to no if you don't want Samba to become a master

# browser on your network. Otherwise the normal election rules apply

;   local master = yes



# OS Level determines the precedence of this server in master browser

# elections. The default value should be reasonable

;   os level = 33



# Domain Master specifies Samba to be the Domain Master Browser. This

# allows Samba to collate browse lists between subnets. Don't use this

# if you already have a Windows NT domain controller doing this job

;   domain master = no 



# Preferred Master causes Samba to force a local browser election on startup

# and gives it a slightly higher chance of winning the election

;   preferred master = no



# Enable this if you want Samba to be a domain logon server for 

# Windows95 workstations. 

;   domain logons = yes



# if you enable domain logons then you may want a per-machine or

# per user logon script

# run a specific logon batch file per workstation (machine)

;   logon script = %m.bat

# run a specific logon batch file per username

;   logon script = %U.bat



# Where to store roving profiles (only for Win95 and WinNT)

#        %L substitutes for this servers netbios name, %U is username

#        You must uncomment the [Profiles] share below

;   logon path = \\%L\Profiles\%U



# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server

;   wins support = yes

;	max wins ttl = 518400

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

;   wins server = 10.0.7.3

;   wins server = 10.0.7.4

;   wins server = 10.0.7.5

;   wins server = 10.0.7.6

;   wins server = 10.0.7.7

;   wins server = 10.0.7.8

;   wins server = 10.0.7.9

;   wins server = 10.0.7.10

;   wins server = 10.0.7.11

;   wins server = 10.0.7.12

;   wins server = 10.0.7.13

;   wins server = 10.0.7.14

;   wins server = 10.0.7.15

;   wins server = 10.0.7.16

;   wins server = 10.0.7.17	



# WINS Proxy - Tells Samba to answer name resolution queries on

# behalf of a non WINS capable client, for this to work there must be

# at least one	WINS Server on the network. The default is NO.

;   wins proxy = no



# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names

# via DNS nslookups. The default is NO.

   dns proxy = no 



# These scripts are used on a domain controller or stand-alone 

# machine to add or delete corresponding unix accounts

;  add user script = /usr/sbin/useradd %u

;  add group script = /usr/sbin/groupadd %g

;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u

;  delete user script = /usr/sbin/userdel %u

;  delete user from group script = /usr/sbin/deluser %u %g

;  delete group script = /usr/sbin/groupdel %g



# Audity

vfs objects = full_audit

full_audit:sucess = open, opendir, write, unlink, rename, mkdir, rmdir

full_audit:prefix = %u|%I|%S

full_audit:failure = none

full_audit:facility = local5

full_audit:priority = notice



#============================ Share Definitions ==============================

#[homes]

   comment = Home Directories

   browseable = no

   writable = no



# Un-comment the following and create the netlogon directory for Domain Logons

; [netlogon]

;   comment = Network Logon Service

;   path = /var/lib/samba/netlogon

;   guest ok = yes

;   writable = no

;   share modes = no





# Un-comment the following to provide a specific roving profile share

# the default is to use the user's home directory

;[Profiles]

;    path = /var/lib/samba/profiles

;    browseable = no

;    guest ok = yes





# NOTE: If you have a BSD-style print system there is no need to 

# specifically define each individual printer

#[printers]

   comment = All Printers

   path = /var/spool/samba

   browseable = no

# Set public = yes to allow user 'guest account' to print

   guest ok = no

   writable = no

   printable = no



# This one is useful for people to share files

;[tmp]

;   comment = Temporary file space

;   path = /tmp

;   read only = no

;   public = yes



# A publicly accessible directory, but read only, except for people in

# the "staff" group

;[public]

;   comment = Public Stuff

;   path = /mnt/samba

;   public = yes

;   writable = yes

;   printable = no

;   write list = @staff



# Other examples. 

#

# A private printer, usable only by fred. Spool data will be placed in fred's

# home directory. Note that fred must have write access to the spool directory,

# wherever it is.

;[fredsprn]

;   comment = Fred's Printer

;   valid users = fred

;   path = /homes/fred

;   printer = freds_printer

;   public = no

;   writable = no

;   printable = yes



# A private directory, usable only by fred. Note that fred requires write

# access to the directory.

;[fredsdir]

;   comment = Fred's Service

;   path = /usr/somewhere/private

;   valid users = fred

;   public = no

;   writable = yes

;   printable = no



# a service which has a different directory for each machine that connects

# this allows you to tailor configurations to incoming machines. You could

# also use the %U option to tailor it by user name.

# The %m gets replaced with the machine name that is connecting.

;[pchome]

;  comment = PC Directories

;  path = /usr/pc/%m

;  public = no

;  writable = yes



# A publicly accessible directory, read/write to all users. Note that all files

# created in the directory by users will be owned by the default user, so

# any user with access can delete any other user's files. Obviously this

# directory must be writable by the default user. Another user could of course

# be specified, in which case all files would be owned by that user instead.

;[public]

;   path = /usr/somewhere/else/public

;   public = yes

;   only guest = yes

;   writable = yes

;   printable = no



# The following two entries demonstrate how to share a directory so that two

# users can place files there that will be owned by the specific users. In this

# setup, the directory should be writable by both users and should have the

# sticky bit set on it to prevent abuse. Obviously this could be extended to

# as many users as required.

;[myshare]

;   comment = Mary's and Fred's stuff

;   path = /usr/somewhere/shared

;   valid users = mary fred

;   public = no

;   writable = yes

;   printable = no

;   create mask = 0765

[Scan]

    path = /mnt/scan/  

    guest ok = no

    browseable = no

    available = yes

    read only = no

    writeable = yes

    valid users = sc

    create mask = 0756

    force create mode = 0756

[Dpscan]

    path = /media/dpscan/

    guest ok = no

    browseable = no

    available = yes

    read only = no

    writeable = yes

    valid users = dpsc

    create mask = 0756

    force create mode = 0756

[Atestados]

    path = /mnt/atestados/

    guest ok = no

    browseable = no

    available = yes

    read only = no

    writeable = yes

    valid users = rh07;sc

    create mask = 0756

    force create mode = 0756