speedy

13. Re: speedy

Rubens Barrabaz Silveira Neto
barrabaz_tux

(usa Nenhuma)

Enviado em 05/02/2010 - 04:34h

Ok meu nego, então na interface vc até pega um IP da internet, lá no messages da pra ver um kill signal no ppp0, você mesmo quem encerrou o cancelou o processo?

enquanto conectado, consegue pingar o IP 74.125.47.147?
faz também um "traceroute 74.125.47.147" e um "telnet 74.125.47.147 80" e ve se conecta.
quando pingar deixa outro terminal com aquele "tail -f /var/log/messages"

depois de conectado, manda um ifconfig e olha a interface ppp0, depois de uns 5 minutos, olha de novo no ifconfig e ve se ela ainda esta ativa e com o mesmo IP.

também posta a saida do comando "ethtool ppp0"

e a saida do "/etc/resolv.conf"

perde a esperança não meu rei, logo tu conecta...

Mto axé aee!!!


  


14. Speedy

marcos
marcos.menini

(usa Slackware)

Enviado em 05/02/2010 - 14:34h

Olá Barrabás, eu que encerrei o processo no ppp0...

Segue abaixo os passos que fiz.

oot@A:~# pppoe-start
. Connected!
root@A:~# ping 74.125.47.147
PING 74.125.47.147 (74.125.47.147) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable
From 192.168.1.1 icmp_seq=2 Destination Host Unreachable
From 192.168.1.1 icmp_seq=3 Destination Host Unreachable
From 192.168.1.1 icmp_seq=4 Destination Host Unreachable
From 192.168.1.1 icmp_seq=5 Destination Host Unreachable
^C
--- 74.125.47.147 ping statistics ---
5 packets transmitted, 0 received, +5 errors, 100% packet loss, time 4008ms

root@A:~# telnet 74.125.47.147 80
Trying 74.125.47.147...
telnet: connect to address 74.125.47.147: No route to host
root@A:~# ping 74.125.47.147
PING 74.125.47.147 (74.125.47.147) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable
From 192.168.1.1 icmp_seq=2 Destination Host Unreachable
From 192.168.1.1 icmp_seq=3 Destination Host Unreachable
From 192.168.1.1 icmp_seq=4 Destination Host Unreachable
From 192.168.1.1 icmp_seq=5 Destination Host Unreachable
From 192.168.1.1 icmp_seq=6 Destination Host Unreachable
From 192.168.1.1 icmp_seq=7 Destination Host Unreachable
From 192.168.1.1 icmp_seq=8 Destination Host Unreachable

--- 74.125.47.147 ping statistics ---
40 packets transmitted, 0 received, +40 errors, 100% packet loss, time 39077ms

root@A:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:d4:f4:2b:1f
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:d4ff:fef4:2b1f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:130 errors:0 dropped:0 overruns:0 frame:0
TX packets:136 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9617 (9.3 KiB) TX bytes:9237 (9.0 KiB)
Interrupt:27 Base address:0x4000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:57 errors:0 dropped:0 overruns:0 frame:0
TX packets:57 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2667 (2.6 KiB) TX bytes:2667 (2.6 KiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:187.35.233.213 P-t-P:201.92.100.190 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:142 (142.0 B) TX bytes:37 (37.0 B)

root@A:~# ethtool ppp0
Settings for ppp0:
No data available
root@A:~#
________________________________________________________________________

vi /etc/resolv.conf


ameserver 200.204.0.10
nameserver 200.204.0.138

________________________________________________________________________


root@A:~# tail -f /var/log/messages
Feb 5 14:13:37 A kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 5 14:13:37 A pppd[4010]: pppd 2.4.4 started by root, uid 0
Feb 5 14:13:37 A pppd[4010]: Using interface ppp0
Feb 5 14:13:37 A pppd[4010]: Connect: ppp0 <--> /dev/pts/2
Feb 5 14:13:37 A pppoe[4011]: PPP session is 812 (0x32c)
Feb 5 14:13:38 A pppd[4010]: PAP authentication succeeded
Feb 5 14:13:38 A kernel: PPP BSD Compression module registered
Feb 5 14:13:38 A pppd[4010]: local IP address 187.35.233.213
Feb 5 14:13:38 A pppd[4010]: remote IP address 201.92.100.190
Feb 5 14:14:50 A ntpd[3412]: Listening on interface #3 ppp0, 187.35.233.213#123 Enabled
Feb 5 14:19:29 A kernel: usb 1-1: new high speed USB device using ehci_hcd and address 4
Feb 5 14:19:29 A kernel: usb 1-1: New USB device found, idVendor=152d, idProduct=2339
Feb 5 14:19:29 A kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
Feb 5 14:19:29 A kernel: usb 1-1: Product: USB to ATA/ATAPI Bridge
Feb 5 14:19:29 A kernel: usb 1-1: Manufacturer: JMicron
Feb 5 14:19:29 A kernel: usb 1-1: SerialNumber: 152D203380B6
Feb 5 14:19:29 A kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 5 14:19:29 A kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Feb 5 14:19:34 A kernel: scsi 4:0:0:0: Direct-Access Hitachi HTS541612J9SA00 PQ: 0 ANSI: 2 CCS
Feb 5 14:19:34 A kernel: sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
Feb 5 14:19:34 A kernel: sd 4:0:0:0: [sdb] Write Protect is off
Feb 5 14:19:34 A kernel: sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
Feb 5 14:19:34 A kernel: sd 4:0:0:0: [sdb] Write Protect is off
Feb 5 14:19:34 A kernel: sdb: sdb1 sdb2
Feb 5 14:19:34 A kernel: sd 4:0:0:0: [sdb] Attached SCSI disk
Feb 5 14:19:34 A kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
Feb 5 14:19:53 A ntfs-3g[4120]: Version 2009.4.4 integrated FUSE 27
Feb 5 14:19:53 A ntfs-3g[4120]: Mounted /dev/sdb2 (Read-Write, label "", NTFS 3.1)
Feb 5 14:19:53 A ntfs-3g[4120]: Cmdline options: rw,nosuid,nodev,uhelper=hal,locale=en_US
Feb 5 14:19:53 A ntfs-3g[4120]: Mount options: rw,nosuid,nodev,uhelper=hal,silent,allow_other,nonempty,relatime,fsname=/dev/sdb2,blkdev,blksize=4096
Feb 5 14:19:53 A hald: mounted /dev/sdb2 on behalf of uid 0




Obrigado!


15. Re: speedy

Rubens Barrabaz Silveira Neto
barrabaz_tux

(usa Nenhuma)

Enviado em 06/02/2010 - 17:35h

muito estranho, ele ta apontando pro teu gateway (modem) 192.168.1.1 e de lá não sai, já fez um reset no modem e tentou (reset to factory standards)?


16. Speedy

marcos
marcos.menini

(usa Slackware)

Enviado em 10/02/2010 - 02:12h

Olá, Barrabás. Sou eu novamente... Ainda não consegui me conectar... Resetei o modem e nada... Tá difícil hein!!! rsrs



01 02



Patrocínio

Site hospedado pelo provedor RedeHost.
Linux banner

Destaques

Artigos

Dicas

Tópicos

Top 10 do mês

Scripts