Problema de sensores. Incompatibilidade do Hardware, falta de pacote ou problema nos sensores

# sudo sensors-detect  

# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200) .
# System: Hewlett-Packard HP G42 Notebook PC [0596110000242710001010100] (laptop)
# Board: Hewlett-Packard 1444

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... Success!
(driver `k10temp')
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus

Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively): YES
Client found at address 0x4f
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Maxim MAX6642'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No

Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (yes/NO/selectively): YES

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)

No modules to load, skipping modules configuration.

Unloading cpuid... OK

# sensors 

acpitz-virtual-0
Adapter: Virtual device
temp1: +53.0°C

k10temp-pci-00c3
Adapter: PCI adapter
temp1: +52.5°C (high = +70.0°C)
(crit = +115.5°C, hyst = +110.5°C)

 # pwmconfig 

# pwmconfig revision 6166 (2013-05-01)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

# sudo modprobe i2c-dev cpuid

# sudo modprobe cpuid

# sudo modprobe lp 

# sudo modprobe rtc

modprobe: FATAL: Module rtc not found. 

HP G42 271 Notebook PC (XR191LA#AC4)

OS

Kernel		: Linux 3.16.0-38-generic (x86_64)

Distribution		: Linux Mint 17.2 Rafaela

*-core

       descrição: Placa-mãe

       produto: 1444

       fabricante: Hewlett-Packard

       ID físico: 0

       versão: 69.25

       serial: PBTPB0AEPZK5M0

       slot: Base Board Chassis Location

     *-firmware

          descrição: BIOS

          fabricante: Hewlett-Packard

          ID físico: 0

          versão: F.15

          date: 08/24/2010

          tamanho: 1MiB

          capacidade: 1984KiB

          capacidades: isa pci pnp upgrade shadowing escd cdboot bootselect int5printscreen int9keyboard int14serial int17printer acpi usb agp smartbattery biosbootspecification

     *-cpu

          descrição: CPU

          produto: AMD Athlon(tm) II P340 Dual-Core Processor

          fabricante: Advanced Micro Devices [AMD]

          ID físico: b

          informações do barramento: cpu@0

          versão: AMD Athlon(tm) II P340 Dual-Core Processor

          serial: NotSupport

          slot: Socket S1G4

          tamanho: 800MHz

          capacidade: 2200MHz

          largura: 64 bits 

snd_hda_codec_generic : Generic HD-audio codec parser
arc4 : ARC4 Cipher Algorithm
rt2800pci : Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
rt2800mmio : rt2800 MMIO library
snd_hda_intel : Intel HDA driver
rt2800lib : Ralink RT2800 library
snd_hda_controller : Common HDA driver funcitons
rt2x00pci : rt2x00 pci library
snd_hda_codec : HDA codec core
rt2x00mmio : rt2x00 mmio library
snd_hwdep : Hardware dependent layer
rt2x00lib : rt2x00 library
snd_pcm : Midlevel PCM code for ALSA.
mac80211 : IEEE 802.11 subsystem
snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
kvm
snd_seq_midi_event : MIDI byte <-> sequencer event coder
snd_rawmidi : Midlevel RawMidi code for ALSA.
snd_seq : Advanced Linux Sound Architecture sequencer.
cfg80211 : wireless configuration support
snd_seq_device : ALSA sequencer device management
eeprom_93cx6 : EEPROM 93cx6 chip driver
snd_timer : ALSA timer interface
btusb : Generic Bluetooth USB driver ver 0.6
crc_ccitt : CRC-CCITT calculations
dm_multipath : device-mapper multipath target
bluetooth : Bluetooth Core ver 2.19
joydev : Joystick device interfaces
scsi_dh : SCSI device handler
snd : Advanced Linux Sound Architecture driver for soundcards.