Conexão de rede no Xubuntu 14.04 [RESOLVIDO]

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 16:00h

JJSantos
(usa Gentoo)

Enviado em 26/04/2014 - 16:03h

# cat /etc/udev/rules.d/70-persistent-net.rules

# dmesg | grep 8139

# ifconfig -a

# lspci

# cat /etc/network/interfaces

# service --status-all

 

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 16:07h

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 16:15h

# cat /etc/udev/rules.d/70-persistent-net.rules

# dmesg | grep 8139

# ifconfig -a

# lspci

# cat /etc/network/interfaces

# service --status-all

 

JJSantos
(usa Gentoo)

Enviado em 26/04/2014 - 16:19h

# lsmod

 

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 16:24h

root@inseto-xubuntu:/home/inseto# lsmod

Module                  Size  Used by

nls_iso8859_1          12617  1 

usb_storage            48417  1 

snd_via82xx            28455  2 

snd_mpu401_uart        13865  1 snd_via82xx

snd_ac97_codec        105709  1 snd_via82xx

ac97_bus               12642  1 snd_ac97_codec

gameport               15189  1 snd_via82xx

snd_pcm                85501  2 snd_via82xx,snd_ac97_codec

snd_page_alloc         14230  2 snd_via82xx,snd_pcm

snd_seq_midi           13132  0 

snd_seq_midi_event     14475  1 snd_seq_midi

snd_rawmidi            25135  2 snd_mpu401_uart,snd_seq_midi

snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi

snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi

snd_timer              28584  2 snd_pcm,snd_seq

rfcomm                 53664  4 

snd                    60871  13 snd_via82xx,snd_ac97_codec,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_seq_midi

bnep                   18895  2 

bluetooth             342263  10 bnep,rfcomm

psmouse                91033  0 

serio_raw              13230  0 

i2c_viapro             13096  0 

soundcore              12600  1 snd

shpchp                 32128  0 

parport_pc             31981  1 

ppdev                  17391  0 

mac_hid                13037  0 

lp                     13299  0 

parport                40836  3 lp,ppdev,parport_pc

pata_acpi              12886  0 

8139too                32571  0 

pata_via               13407  2 

8139cp                 27171  0 

mii                    13654  2 8139cp,8139too

sata_via               13535  0 

root@inseto-xubuntu:/home/inseto# 

JJSantos
(usa Gentoo)

Enviado em 26/04/2014 - 16:28h

root@inseto-xubuntu:/home/inseto# lsmod

Module                  Size  Used by

8139too                32571  0 

8139cp                 27171  0 

mii                    13654  2 8139cp,8139too

root@inseto-xubuntu:/home/inseto# 

# rmmod 8139cp

# rmmod 8139too

# rmmod mii

# modprobe 8139cp

# modprobe mii

# service networking restart

# ifconfig -a

 

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 16:39h

root@inseto-xubuntu:/home/inseto# lsmod

Module                  Size  Used by

8139too                32571  0 

8139cp                 27171  0 

mii                    13654  2 8139cp,8139too

root@inseto-xubuntu:/home/inseto# 

# rmmod 8139cp

# rmmod 8139too

# rmmod mii

# modprobe 8139cp

# modprobe mii

# service networking restart

# ifconfig -a

 

root@inseto-xubuntu:/home/inseto# rmmod 8139cp

root@inseto-xubuntu:/home/inseto# rmmod 8139too

rmmod: ERROR: Module 8139too is not currently loaded

root@inseto-xubuntu:/home/inseto# rmmod mii

root@inseto-xubuntu:/home/inseto# modprobe 8139cp

root@inseto-xubuntu:/home/inseto# modprobe mii

root@inseto-xubuntu:/home/inseto# service networking restart

stop: Unknown instance: 

start: Job failed to start

root@inseto-xubuntu:/home/inseto# ifconfig

lo        Link encap:Loopback Local  

          inet end.: 127.0.0.1  Masc:255.0.0.0

          endereço inet6: ::1/128 Escopo:Máquina

          UP LOOPBACK RUNNING  MTU:65536  Métrica:1

          pacotes RX:664 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:664 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:0 

          RX bytes:48224 (48.2 KB) TX bytes:48224 (48.2 KB)



root@inseto-xubuntu:/home/inseto# 

JJSantos
(usa Gentoo)

Enviado em 26/04/2014 - 16:46h

root@inseto-xubuntu:/home/inseto# lsmod

Module                  Size  Used by

8139too                32571  0 

8139cp                 27171  0 

mii                    13654  2 8139cp,8139too

root@inseto-xubuntu:/home/inseto# 

# rmmod 8139cp

# rmmod mii

# modprobe 8139too

# modprobe mii

# service networking restart

# ifconfig -a



Se não der certo, tente outro 



# rmmod 8139cp

# rmmod mii

# modprobe 8139too

# service networking restart

# ifconfig -a

 

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 16:55h

root@inseto-xubuntu:/home/inseto# rmmod 8139cp

root@inseto-xubuntu:/home/inseto# rmmod mii

root@inseto-xubuntu:/home/inseto# modprobe 8139too

root@inseto-xubuntu:/home/inseto# modprobe mii

root@inseto-xubuntu:/home/inseto# service networking restart

stop: Unknown instance: 

start: Job failed to start

root@inseto-xubuntu:/home/inseto# ifconfig -a

eth0      Link encap:Ethernet  Endereço de HW ff:ff:ff:ff:ff:ff  

          BROADCAST MULTICAST  MTU:1500  Métrica:1

          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:1000 

          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



lo        Link encap:Loopback Local  

          inet end.: 127.0.0.1  Masc:255.0.0.0

          endereço inet6: ::1/128 Escopo:Máquina

          UP LOOPBACK RUNNING  MTU:65536  Métrica:1

          pacotes RX:728 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:728 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:0 

          RX bytes:52640 (52.6 KB) TX bytes:52640 (52.6 KB)



root@inseto-xubuntu:/home/inseto# 

root@inseto-xubuntu:/home/inseto# 

root@inseto-xubuntu:/home/inseto# 

root@inseto-xubuntu:/home/inseto# 

root@inseto-xubuntu:/home/inseto# rmmod 8139cp

rmmod: ERROR: Module 8139cp is not currently loaded

root@inseto-xubuntu:/home/inseto# rmmod mii

rmmod: ERROR: Module mii is in use by: 8139too

root@inseto-xubuntu:/home/inseto# modprobe 8139too

root@inseto-xubuntu:/home/inseto# service networking restart

stop: Unknown instance: 

start: Job failed to start

root@inseto-xubuntu:/home/inseto# ifconfig -a

eth0      Link encap:Ethernet  Endereço de HW ff:ff:ff:ff:ff:ff  

          BROADCAST MULTICAST  MTU:1500  Métrica:1

          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:1000 

          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



lo        Link encap:Loopback Local  

          inet end.: 127.0.0.1  Masc:255.0.0.0

          endereço inet6: ::1/128 Escopo:Máquina

          UP LOOPBACK RUNNING  MTU:65536  Métrica:1

          pacotes RX:728 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:728 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:0 

          RX bytes:52640 (52.6 KB) TX bytes:52640 (52.6 KB)



root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# rmmod 8139cp

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# rmmod 8139too

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# rmmod: ERROR: Module 8139too is not currently loaded

Comando 'rmmod:' não encontrado, você quis dizer:

 Comando 'rmmod' do pacote 'kmod' (main)

rmmod:: comando não encontrado

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# rmmod mii

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# modprobe 8139cp

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# modprobe mii

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# service networking restart

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# stop: Unknown instance: 

Comando 'stop:' não encontrado, você quis dizer:

 Comando 'stop' do pacote 'upstart' (main)

stop:: comando não encontrado

root@inseto-xubuntu:/home/inseto# start: Job failed to start

Comando 'start:' não encontrado, você quis dizer:

 Comando 'startx' do pacote 'xinit' (main)

 Comando 'start' do pacote 'upstart' (main)

start:: comando não encontrado

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# ifconfig

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# lo        Link encap:Loopback Local  

lo: comando não encontrado

root@inseto-xubuntu:/home/inseto#           inet end.: 127.0.0.1  Masc:255.0.0.0

Comando 'inet' não encontrado, você quis dizer:

 Comando 'inetd' do pacote 'openbsd-inetd' (main)

 Comando 'net' do pacote 'samba-common-bin' (main)

 Comando 'init' do pacote 'upstart' (main)

inet: comando não encontrado

root@inseto-xubuntu:/home/inseto#           endereço inet6: ::1/128 Escopo:Máquina

endereço: comando não encontrado

root@inseto-xubuntu:/home/inseto#           UP LOOPBACK RUNNING  MTU:65536  Métrica:1

UP: comando não encontrado

root@inseto-xubuntu:/home/inseto#           pacotes RX:664 erros:0 descartados:0 excesso:0 quadro:0

pacotes: comando não encontrado

root@inseto-xubuntu:/home/inseto#           Pacotes TX:664 erros:0 descartados:0 excesso:0 portadora:0

Pacotes: comando não encontrado

root@inseto-xubuntu:/home/inseto#           colisões:0 txqueuelen:0 

colisões:0: comando não encontrado

root@inseto-xubuntu:/home/inseto#           RX bytes:48224 (48.2 KB) TX bytes:48224 (48.2 KB)

bash: erro de sintaxe próximo do `token' não esperado `('

root@inseto-xubuntu:/home/inseto# 

root@inseto-xubuntu:/home/inseto# root@inseto-xubuntu:/home/inseto# 

bash: root@inseto-xubuntu:/home/inseto#: Arquivo ou diretório não encontrado

root@inseto-xubuntu:/home/inseto# 

JJSantos
(usa Gentoo)

Enviado em 26/04/2014 - 17:04h

Abra outro shell..



E faça:

# echo "blacklist 8139cp" | tee -a /etc/modprobe.d/blacklist.conf

# echo "blacklist mii" | tee -a /etc/modprobe.d/blacklist.conf

# echo "blacklist 8139too" | tee -a /etc/modprobe.d/blacklist.conf



Remova o modulo 8139too do arquivo:/etc/modules

# nano /etc/modules

 

# lsmod

# dmesg

# ifconfig -a

 

mcnd2
(usa Debian)

Enviado em 26/04/2014 - 17:27h

root@inseto-xubuntu:/home/inseto# lsmod

Module                  Size  Used by

nls_iso8859_1          12617  1 

usb_storage            48417  1 

snd_via82xx            28455  2 

snd_mpu401_uart        13865  1 snd_via82xx

snd_ac97_codec        105709  1 snd_via82xx

ac97_bus               12642  1 snd_ac97_codec

gameport               15189  1 snd_via82xx

snd_pcm                85501  2 snd_via82xx,snd_ac97_codec

snd_page_alloc         14230  2 snd_via82xx,snd_pcm

snd_seq_midi           13132  0 

snd_seq_midi_event     14475  1 snd_seq_midi

snd_rawmidi            25135  2 snd_mpu401_uart,snd_seq_midi

snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi

snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi

snd_timer              28584  2 snd_pcm,snd_seq

rfcomm                 53664  4 

bnep                   18895  2 

bluetooth             342263  10 bnep,rfcomm

psmouse                91033  0 

snd                    60871  13 snd_via82xx,snd_ac97_codec,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_seq_midi

serio_raw              13230  0 

i2c_viapro             13096  0 

soundcore              12600  1 snd

shpchp                 32128  0 

mac_hid                13037  0 

parport_pc             31981  1 

ppdev                  17391  0 

lp                     13299  0 

parport                40836  3 lp,ppdev,parport_pc

pata_acpi              12886  0 

8139too                32571  0 

8139cp                 27171  0 

sata_via               13535  0 

mii                    13654  2 8139cp,8139too

pata_via               13407  2 

root@inseto-xubuntu:/home/inseto# dmesg

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000]   AMD AuthenticAMD

[    0.000000]   NSC Geode by NSC

[    0.000000]   Cyrix CyrixInstead

[    0.000000]   Centaur CentaurHauls

[    0.000000]   Transmeta GenuineTMx86

[    0.000000]   Transmeta TransmetaCPU

[    0.000000]   UMC UMC UMC UMC

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005bfeffff] usable

[    0.000000] BIOS-e820: [mem 0x000000005bff0000-0x000000005bff2fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x000000005bff3000-0x000000005bffffff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved

[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!

[    0.000000] SMBIOS 2.3 present.

[    0.000000] DMI:    /P4M800-8237, BIOS F5 03/14/2006

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x5bff0 max_arch_pfn = 0x1000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-C7FFF write-protect

[    0.000000]   C8000-EFFFF uncachable

[    0.000000]   F0000-F7FFF write-through

[    0.000000]   F8000-F8FFF uncachable

[    0.000000]   F9000-FFFFF write-through

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask FC0000000 write-back

[    0.000000]   1 base 040000000 mask FE0000000 write-back

[    0.000000]   2 base 05C000000 mask FFC000000 uncachable

[    0.000000]   3 base 0D0000000 mask FF8000000 write-combining

[    0.000000]   4 disabled

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[    0.000000] found SMP MP-table at [mem 0x000f51c0-0x000f51cf] mapped at [c00f51c0]

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]

[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384

[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

[    0.000000]  [mem 0x00000000-0x000fffff] page 4k

[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]

[    0.000000]  [mem 0x37800000-0x379fffff] page 2M

[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]

[    0.000000]  [mem 0x34000000-0x377fffff] page 2M

[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]

[    0.000000]  [mem 0x00100000-0x001fffff] page 4k

[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M

[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]

[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k

[    0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x35c72000-0x36e30fff]

[    0.000000] ACPI: RSDP 000f6b20 000014 (v00 P4M80P)

[    0.000000] ACPI: RSDT 5bff3000 00002C (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101)

[    0.000000] ACPI: FACP 5bff3040 000074 (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101)

[    0.000000] ACPI: DSDT 5bff30c0 003114 (v01 P4M80P AWRDACPI 00001000 MSFT 0100000C)

[    0.000000] ACPI: FACS 5bff0000 000040

[    0.000000] ACPI: APIC 5bff6200 000068 (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] 579MB HIGHMEM available.

[    0.000000] 891MB LOWMEM available.

[    0.000000]   mapped low ram: 0 - 37bfe000

[    0.000000]   low ram: 0 - 37bfe000

[    0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]

[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]

[    0.000000]   HighMem  [mem 0x37bfe000-0x5bfeffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x00001000-0x0009efff]

[    0.000000]   node   0: [mem 0x00100000-0x5bfeffff]

[    0.000000] On node 0 totalpages: 376718

[    0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f707e020

[    0.000000]   DMA zone: 32 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 3998 pages, LIFO batch:0

[    0.000000]   Normal zone: 1752 pages used for memmap

[    0.000000]   Normal zone: 224254 pages, LIFO batch:31

[    0.000000]   HighMem zone: 1160 pages used for memmap

[    0.000000]   HighMem zone: 148466 pages, LIFO batch:31

[    0.000000] Using APIC driver default

[    0.000000] ACPI: PM-Timer IO Port: 0x4008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs

[    0.000000] nr_irqs_gsi: 40

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]

[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[    0.000000] e820: [mem 0x5c000000-0xfebfffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1

[    0.000000] PERCPU: Embedded 14 pages/cpu @f7059000 s36096 r0 d21248 u57344

[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 374934

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=7d84c70c-e337-4597-bb80-ddaf3340d7dd ro persistent quiet splash

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Initializing CPU#0

[    0.000000] allocated 3014520 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Initializing HighMem for node 0 (00037bfe:0005bff0)

[    0.000000] Memory: 1461144K/1506872K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 45728K reserved, 593864K highmem)

[    0.000000] virtual kernel memory layout:

[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)

[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)

[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)

[    0.000000]       .init : 0xc19ae000 - 0xc1a88000   ( 872 kB)

[    0.000000]       .data : 0xc165b0b2 - 0xc19ad4c0   (3401 kB)

[    0.000000]       .text : 0xc1000000 - 0xc165b0b2   (6508 kB)

[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.

[    0.000000] NR_IRQS:2304 nr_irqs:512 16

[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 2133.463 MHz processor

[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.92 BogoMIPS (lpj=8533852)

[    0.004013] pid_max: default: 32768 minimum: 301

[    0.004092] Security Framework initialized

[    0.004135] AppArmor: AppArmor initialized

[    0.004140] Yama: becoming mindful.

[    0.004255] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.004262] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.008123] Initializing cgroup subsys memory

[    0.008143] Initializing cgroup subsys devices

[    0.008150] Initializing cgroup subsys freezer

[    0.008156] Initializing cgroup subsys blkio

[    0.008160] Initializing cgroup subsys perf_event

[    0.008167] Initializing cgroup subsys hugetlb

[    0.008243] CPU0: Hyper-Threading is disabled

[    0.008252] mce: CPU supports 4 MCE banks

[    0.008274] CPU0: Thermal monitoring enabled (TM1)

[    0.008304] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128

[    0.008304] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64

[    0.008304] tlb_flushall_shift: 6

[    0.043446] ACPI: Core revision 20131115

[    0.046341] ACPI: All ACPI Tables successfully acquired

[    0.048037] ftrace: allocating 27695 entries in 55 pages

[    0.064238] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.068736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.108449] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.13GHz (fam: 0f, model: 04, stepping: 01)

[    0.117149] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.

[    0.117169] ... version:                0

[    0.117173] ... bit width:              40

[    0.117175] ... generic registers:      18

[    0.117179] ... value mask:             000000ffffffffff

[    0.117181] ... max period:             0000007fffffffff

[    0.117184] ... fixed-purpose events:   0

[    0.117186] ... event mask:             000000000003ffff

[    0.121608] x86: Booted up 1 node, 1 CPUs

[    0.121618] smpboot: Total of 1 processors activated (4266.92 BogoMIPS)

[    0.122503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.122803] devtmpfs: initialized

[    0.123235] EVM: security.selinux

[    0.123241] EVM: security.SMACK64

[    0.123243] EVM: security.ima

[    0.123246] EVM: security.capability

[    0.123502] PM: Registering ACPI NVS region [mem 0x5bff0000-0x5bff2fff] (12288 bytes)

[    0.125783] pinctrl core: initialized pinctrl subsystem

[    0.126018] regulator-dummy: no parameters

[    0.126088] RTC time: 20:14:18, date: 04/26/14

[    0.126204] NET: Registered protocol family 16

[    0.126598] EISA bus registered

[    0.126609] cpuidle: using governor ladder

[    0.126612] cpuidle: using governor menu

[    0.126783] ACPI: bus type PCI registered

[    0.126792] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.135369] PCI: PCI BIOS revision 2.10 entry at 0xfb040, last bus=1

[    0.135376] PCI: Using configuration type 1 for base access

[    0.137918] bio: create slab <bio-0> at 0

[    0.138365] ACPI: Added _OSI(Module Device)

[    0.138373] ACPI: Added _OSI(Processor Device)

[    0.138376] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.138380] ACPI: Added _OSI(Processor Aggregator Device)

[    0.143565] ACPI: Interpreter enabled

[    0.143596] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)

[    0.143607] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)

[    0.143630] ACPI: (supports S0 S1 S4 S5)

[    0.143635] ACPI: Using IOAPIC for interrupt routing

[    0.143710] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[    0.143866] ACPI: No dock devices found.

[    0.152864] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.152884] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]

[    0.152898] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.153061] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)

[    0.153068] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)

[    0.153074] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)

[    0.153079] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)

[    0.153084] acpi PNP0A03:00: host bridge window [mem 0x5c000000-0xfebfffff] (ignored)

[    0.153089] PCI: root bus 00: using default resources

[    0.153096] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.

[    0.153430] PCI host bridge to bus 0000:00

[    0.153443] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.153449] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]

[    0.153454] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]

[    0.153482] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000

[    0.153502] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]

[    0.153747] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000

[    0.153951] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000

[    0.154145] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000

[    0.154342] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000

[    0.154541] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000

[    0.154744] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400

[    0.154824] pci 0000:00:01.0: supports D1

[    0.154985] pci 0000:00:09.0: [10ec:8139] type 00 class 0x020000

[    0.155015] pci 0000:00:09.0: reg 0x10: [io  0x9000-0x90ff]

[    0.155031] pci 0000:00:09.0: reg 0x14: [mem 0xda000000-0xda0000ff]

[    0.155124] pci 0000:00:09.0: supports D1

[    0.155129] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold

[    0.155305] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f

[    0.155336] pci 0000:00:0f.0: reg 0x10: [io  0x9400-0x9407]

[    0.155352] pci 0000:00:0f.0: reg 0x14: [io  0x9800-0x9803]

[    0.155367] pci 0000:00:0f.0: reg 0x18: [io  0x9c00-0x9c07]

[    0.155381] pci 0000:00:0f.0: reg 0x1c: [io  0xa000-0xa003]

[    0.155396] pci 0000:00:0f.0: reg 0x20: [io  0xa400-0xa40f]

[    0.155411] pci 0000:00:0f.0: reg 0x24: [io  0xa800-0xa8ff]

[    0.155613] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a

[    0.155685] pci 0000:00:0f.1: reg 0x20: [io  0xac00-0xac0f]

[    0.155913] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300

[    0.155982] pci 0000:00:10.0: reg 0x20: [io  0xb000-0xb01f]

[    0.156075] pci 0000:00:10.0: supports D1 D2

[    0.156081] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.156196] pci 0000:00:10.0: System wakeup disabled by ACPI

[    0.156303] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300

[    0.156373] pci 0000:00:10.1: reg 0x20: [io  0xb400-0xb41f]

[    0.156435] pci 0000:00:10.1: supports D1 D2

[    0.156440] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.156552] pci 0000:00:10.1: System wakeup disabled by ACPI

[    0.156637] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300

[    0.156707] pci 0000:00:10.2: reg 0x20: [io  0xb800-0xb81f]

[    0.156768] pci 0000:00:10.2: supports D1 D2

[    0.156773] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold

[    0.156881] pci 0000:00:10.2: System wakeup disabled by ACPI

[    0.156962] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300

[    0.157032] pci 0000:00:10.3: reg 0x20: [io  0xbc00-0xbc1f]

[    0.157094] pci 0000:00:10.3: supports D1 D2

[    0.157098] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold

[    0.157203] pci 0000:00:10.3: System wakeup disabled by ACPI

[    0.157281] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320

[    0.157311] pci 0000:00:10.4: reg 0x10: [mem 0xde001000-0xde0010ff]

[    0.157414] pci 0000:00:10.4: supports D1 D2

[    0.157419] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold

[    0.157583] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100

[    0.157677] HPET not enabled in BIOS. You might try hpet=force boot option

[    0.157884] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100

[    0.157914] pci 0000:00:11.5: reg 0x10: [io  0xc000-0xc0ff]

[    0.158020] pci 0000:00:11.5: supports D1 D2

[    0.158273] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000

[    0.158303] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref]

[    0.158317] pci 0000:01:00.0: reg 0x14: [mem 0xdc000000-0xdcffffff]

[    0.158364] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]

[    0.158409] pci 0000:01:00.0: supports D1 D2

[    0.158510] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.158522] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]

[    0.158530] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdbffffff pref]

[    0.158546] pci_bus 0000:00: on NUMA node 0

[    0.158875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)

[    0.159114] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5

[    0.159352] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)

[    0.159554] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.159737] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.159913] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.160131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.160309] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.160578] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0

[    0.160848] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0

[    0.161145] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0

[    0.161414] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.

[    0.162432] ACPI: \_SB_.PCI0: notify handler is installed

[    0.162485] Found 1 acpi root devices

[    0.162798] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.162804] vgaarb: loaded

[    0.162807] vgaarb: bridge control possible 0000:01:00.0

[    0.163334] SCSI subsystem initialized

[    0.163484] libata version 3.00 loaded.

[    0.163566] ACPI: bus type USB registered

[    0.163629] usbcore: registered new interface driver usbfs

[    0.163657] usbcore: registered new interface driver hub

[    0.163752] usbcore: registered new device driver usb

[    0.164128] PCI: Using ACPI for IRQ routing

[    0.164142] PCI: pci_cache_line_size set to 64 bytes

[    0.164184] pci 0000:00:09.0: address space collision: [mem 0xda000000-0xda0000ff] conflicts with PCI Bus 0000:01 [mem 0xd8000000-0xdbffffff pref]

[    0.164245] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]

[    0.164251] e820: reserve RAM buffer [mem 0x5bff0000-0x5bffffff]

[    0.164512] NetLabel: Initializing

[    0.164520] NetLabel:  domain hash size = 128

[    0.164522] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.164553] NetLabel:  unlabeled traffic allowed by default

[    0.164894] Switched to clocksource refined-jiffies

[    0.178663] AppArmor: AppArmor Filesystem Enabled

[    0.178760] pnp: PnP ACPI init

[    0.178797] ACPI: bus type PNP registered

[    0.179291] system 00:00: [mem 0x000c8400-0x000cbfff] has been reserved

[    0.179302] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved

[    0.179307] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved

[    0.179313] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved

[    0.179319] system 00:00: [mem 0x5bff0000-0x5bffffff] could not be reserved

[    0.179325] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved

[    0.179331] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved

[    0.179336] system 00:00: [mem 0x00100000-0x5bfeffff] could not be reserved

[    0.179342] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved

[    0.179348] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved

[    0.179353] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved

[    0.179362] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.179527] system 00:01: [io  0x4000-0x407f] has been reserved

[    0.179535] system 00:01: [io  0x0500-0x050f] has been reserved

[    0.179543] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.180265] system 00:02: [io  0x04d0-0x04d1] has been reserved

[    0.180275] system 00:02: [io  0x0290-0x029f] has been reserved

[    0.180280] system 00:02: [io  0x0800-0x0805] has been reserved

[    0.180289] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.180326] pnp 00:03: [dma 4]

[    0.180383] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)

[    0.180485] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.180558] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)

[    0.180637] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)

[    0.181266] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.181767] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.182286] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)

[    0.182595] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)

[    0.182738] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.182804] pnp: PnP ACPI: found 12 devices

[    0.182809] ACPI: bus type PNP unregistered

[    0.182817] PnPBIOS: Disabled by ACPI PNP

[    0.221692] Switched to clocksource acpi_pm

[    0.221753] pci 0000:00:09.0: BAR 1: assigned [mem 0x5c000000-0x5c0000ff]

[    0.221768] pci 0000:00:09.0: BAR 1: error updating (0x5c000000 != 0x58000000)

[    0.221779] pci 0000:01:00.0: BAR 6: assigned [mem 0xdd000000-0xdd00ffff pref]

[    0.221785] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.221794] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]

[    0.221802] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdbffffff pref]

[    0.221814] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]

[    0.221819] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]

[    0.221825] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]

[    0.221829] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref]

[    0.221919] NET: Registered protocol family 2

[    0.222354] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.222390] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.222443] TCP: Hash tables configured (established 8192 bind 8192)

[    0.222556] TCP: reno registered

[    0.222568] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.222586] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.222771] NET: Registered protocol family 1

[    0.222829] pci 0000:00:01.0: disabling DAC on VIA PCI bridge

[    0.223442] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21

[    0.223449] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21

[    0.223607] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message

[    0.223629] pci 0000:01:00.0: Boot video device

[    0.223636] PCI: CLS 32 bytes, default 64

[    0.223790] Trying to unpack rootfs image as initramfs...

[    1.012303] Freeing initrd memory: 18172K (f5c72000 - f6e31000)

[    1.012740] microcode: CPU0 sig=0xf41, pf=0x4, revision=0x17

[    1.012897] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    1.012905] Scanning for low memory corruption every 60 seconds

[    1.013450] Initialise system trusted keyring

[    1.013558] audit: initializing netlink socket (disabled)

[    1.013590] type=2000 audit(1398543259.011:1): initialized

[    1.055184] bounce pool size: 64 pages

[    1.055222] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    1.058331] VFS: Disk quotas dquot_6.5.2

[    1.058455] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    1.059579] fuse init (API version 7.22)

[    1.059808] msgmni has been set to 1729

[    1.059963] Key type big_key registered

[    1.060908] Key type asymmetric registered

[    1.060915] Asymmetric key parser 'x509' registered

[    1.061033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    1.061145] io scheduler noop registered

[    1.061151] io scheduler deadline registered (default)

[    1.061243] io scheduler cfq registered

[    1.061520] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.061559] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.061706] ipmi message handler version 39.2

[    1.061846] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0

[    1.061860] ACPI: Power Button [PWRB]

[    1.061973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[    1.061982] ACPI: Power Button [PWRF]

[    1.062281] GHES: HEST is not enabled!

[    1.062550] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[    1.083145] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    1.083276] isapnp: Scanning for PnP cards...

[    1.153136] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A

[    1.156396] Linux agpgart interface v0.103

[    1.156555] agpgart: Detected VIA VT3314 chipset

[    1.166961] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000

[    1.213937] brd: module loaded

[    1.215884] loop: module loaded

[    1.216960] libphy: Fixed MDIO Bus: probed

[    1.217211] tun: Universal TUN/TAP device driver, 1.6

[    1.217216] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    1.217366] PPP generic driver version 2.4.2

[    1.217484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.217501] ehci-pci: EHCI PCI platform driver

[    1.217882] ehci-pci 0000:00:10.4: EHCI Host Controller

[    1.217901] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1

[    1.218020] ehci-pci 0000:00:10.4: irq 21, io mem 0xde001000

[    1.261707] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00

[    1.261854] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.261862] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.261867] usb usb1: Product: EHCI Host Controller

[    1.261871] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd

[    1.261875] usb usb1: SerialNumber: 0000:00:10.4

[    1.262182] hub 1-0:1.0: USB hub found

[    1.262220] hub 1-0:1.0: 8 ports detected

[    1.262632] ehci-platform: EHCI generic platform driver

[    1.262676] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.262680] ohci-pci: OHCI PCI platform driver

[    1.262712] ohci-platform: OHCI generic platform driver

[    1.262731] uhci_hcd: USB Universal Host Controller Interface driver

[    1.263075] uhci_hcd 0000:00:10.0: UHCI Host Controller

[    1.263094] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2

[    1.263174] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000

[    1.263321] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    1.263328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.263333] usb usb2: Product: UHCI Host Controller

[    1.263337] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd

[    1.263341] usb usb2: SerialNumber: 0000:00:10.0

[    1.263643] hub 2-0:1.0: USB hub found

[    1.263668] hub 2-0:1.0: 2 ports detected

[    1.264215] uhci_hcd 0000:00:10.1: UHCI Host Controller

[    1.264234] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3

[    1.264281] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400

[    1.264430] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[    1.264437] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.264441] usb usb3: Product: UHCI Host Controller

[    1.264446] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd

[    1.264449] usb usb3: SerialNumber: 0000:00:10.1

[    1.264763] hub 3-0:1.0: USB hub found

[    1.264788] hub 3-0:1.0: 2 ports detected

[    1.265260] uhci_hcd 0000:00:10.2: UHCI Host Controller

[    1.265289] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4

[    1.265372] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800

[    1.309160] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[    1.309167] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.309172] usb usb4: Product: UHCI Host Controller

[    1.309176] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd

[    1.309180] usb usb4: SerialNumber: 0000:00:10.2

[    1.309504] hub 4-0:1.0: USB hub found

[    1.309535] hub 4-0:1.0: 2 ports detected

[    1.310012] uhci_hcd 0000:00:10.3: UHCI Host Controller

[    1.310031] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5

[    1.310077] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000bc00

[    1.310223] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[    1.310230] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.310235] usb usb5: Product: UHCI Host Controller

[    1.310239] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd

[    1.310243] usb usb5: SerialNumber: 0000:00:10.3

[    1.310534] hub 5-0:1.0: USB hub found

[    1.310560] hub 5-0:1.0: 2 ports detected

[    1.310932] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    1.311567] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.311590] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.311898] mousedev: PS/2 mouse device common for all mice

[    1.312329] rtc_cmos 00:04: RTC can wake from S4

[    1.312616] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

[    1.312692] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram

[    1.312857] device-mapper: uevent: version 1.0.3

[    1.313025] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com

[    1.313104] platform eisa.0: Probing EISA bus 0

[    1.313138] platform eisa.0: Cannot allocate resource for EISA slot 4

[    1.313163] platform eisa.0: EISA: Detected 0 cards

[    1.313184] cpufreq-nforce2: No nForce2 chipset.

[    1.313192] ledtrig-cpu: registered to indicate activity on CPUs

[    1.313497] TCP: cubic registered

[    1.313705] NET: Registered protocol family 10

[    1.314151] NET: Registered protocol family 17

[    1.314188] Key type dns_resolver registered

[    1.314585] Using IPI No-Shortcut mode

[    1.314819] Loading compiled-in X.509 certificates

[    1.321229] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'

[    1.321266] registered taskstats version 1

[    1.328497] Key type trusted registered

[    1.335173] Key type encrypted registered

[    1.338822] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2

[    1.430024] AppArmor: AppArmor sha1 policy hashing enabled

[    1.430036] IMA: No TPM chip found, activating TPM-bypass!

[    1.430412] regulator-dummy: disabling

[    1.430567]   Magic number: 10:232:246

[    1.430744] rtc_cmos 00:04: setting system clock to 2014-04-26 20:14:20 UTC (1398543260)

[    1.430941] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    1.430946] EDD information not available.

[    1.431023] PM: Hibernation image not present or could not be loaded.

[    1.518436] isapnp: No Plug & Play device found

[    1.519936] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)

[    1.520199] Write protecting the kernel text: 6512k

[    1.520325] Write protecting the kernel read-only data: 2756k

[    1.566825] systemd-udevd[89]: starting version 204

[    1.725842] pata_via 0000:00:0f.1: version 0.3.4

[    1.726455] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20

[    1.726463] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20

[    1.740123] scsi0 : pata_via

[    1.748285] scsi1 : pata_via

[    1.748458] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xac00 irq 14

[    1.748465] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xac08 irq 15

[    1.751819] sata_via 0000:00:0f.0: version 2.6

[    1.755484] sata_via 0000:00:0f.0: routed to hard irq line 11

[    1.760118] scsi2 : sata_via

[    1.762108] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

[    1.764129] scsi3 : sata_via

[    1.764306] ata3: SATA max UDMA/133 cmd 0x9400 ctl 0x9800 bmdma 0xa400 irq 20

[    1.764314] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0xa000 bmdma 0xa408 irq 20

[    1.766712] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too

[    1.786139] 8139too: 8139too Fast Ethernet driver 0.9.28

[    1.799565] 8139too 0000:00:09.0 eth0: RealTek RTL8139 at 0x00019000, ff:ff:ff:df:ff:ff, IRQ 17

[    1.912654] ata1.00: HPA detected: current 156299375, native 156301488

[    1.912668] ata1.00: ATA-7: SAMSUNG SP0842N, BH100-45, max UDMA/100

[    1.912673] ata1.00: 156299375 sectors, multi 16: LBA48 

[    1.944506] ata1.00: configured for UDMA/100

[    1.944809] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0842N  BH10 PQ: 0 ANSI: 5

[    1.945439] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)

[    1.945582] sd 0:0:0:0: [sda] Write Protect is off

[    1.945591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.945677] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.946162] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    1.953179]  sda: sda1 sda2 sda3

[    1.954070] sd 0:0:0:0: [sda] Attached SCSI disk

[    1.968082] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)

[    2.116490] ata2.01: ATAPI: LG CD-RW CED-8120B, 1.03, max MWDMA2

[    2.132343] ata2.01: configured for MWDMA2

[    2.132407] tsc: Refined TSC clocksource calibration: 2133.408 MHz

[    2.134186] scsi 1:0:1:0: CD-ROM            LG       CD-RW CED-8120B  1.03 PQ: 0 ANSI: 5

[    2.137665] sr0: scsi3-mmc drive: 24x/32x writer cd/rw xa/form2 cdda tray

[    2.137675] cdrom: Uniform CD-ROM driver Revision: 3.20

[    2.138829] sr 1:0:1:0: Attached scsi CD-ROM sr0

[    2.139405] sr 1:0:1:0: Attached scsi generic sg1 type 5

[    2.340047] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)

[    3.007748] EXT4-fs (sda2): INFO: recovery required on readonly filesystem

[    3.007759] EXT4-fs (sda2): write access will be enabled during recovery

[    3.031148] EXT4-fs (sda2): recovery complete

[    3.032413] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

[    3.132132] Switched to clocksource tsc

[    3.696599] random: init urandom read with 93 bits of entropy available

[    4.461327] random: nonblocking pool is initialized

[   11.627530] Adding 979928k swap on /dev/sda1.  Priority:-1 extents:1 across:979928k FS

[   11.672339] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro

[   12.196340] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   12.847493] systemd-udevd[291]: starting version 204

[   13.395459] lp: driver loaded but no devices found

[   13.517577] ppdev: user-space parallel port driver

[   13.591501] parport_pc 00:09: reported by Plug and Play ACPI

[   13.591565] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

[   13.688617] lp0: using parport0 (interrupt-driven).

[   14.344670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   15.606114] Bluetooth: Core ver 2.17

[   15.610829] NET: Registered protocol family 31

[   15.610840] Bluetooth: HCI device and connection manager initialized

[   15.610863] Bluetooth: HCI socket layer initialized

[   15.610869] Bluetooth: L2CAP socket layer initialized

[   15.610899] Bluetooth: SCO socket layer initialized

[   15.707820] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   15.707832] Bluetooth: BNEP filters: protocol multicast

[   15.707855] Bluetooth: BNEP socket layer initialized

[   15.729235] Bluetooth: RFCOMM TTY layer initialized

[   15.729267] Bluetooth: RFCOMM socket layer initialized

[   15.729292] Bluetooth: RFCOMM ver 1.11

[   15.894399] type=1400 audit(1398543274.960:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser"

[   15.894424] type=1400 audit(1398543274.960:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"

[   15.894436] type=1400 audit(1398543274.960:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"

[   15.895599] type=1400 audit(1398543274.960:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"

[   15.895622] type=1400 audit(1398543274.960:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"

[   15.913527] type=1400 audit(1398543274.980:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"

[   16.021950] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64

[   16.135522] type=1400 audit(1398543275.200:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=458 comm="apparmor_parser"

[   16.135546] type=1400 audit(1398543275.200:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=458 comm="apparmor_parser"

[   16.147094] type=1400 audit(1398543275.212:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=458 comm="apparmor_parser"

[   16.317956] init: network-interface (eth0) pre-start process (459) terminated with status 1

[   16.590678] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4

[   16.591740] init: network-interface (eth0) post-stop process (472) terminated with status 1

[   17.076354] init: cups main process (468) killed by HUP signal

[   17.076395] init: cups main process ended, respawning

[   18.288938] init: network-interface (lo) pre-start process (504) terminated with status 1

[   18.504535] init: network-interface (lo) post-stop process (532) terminated with status 1

[   18.746416] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

[   18.746427] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

[   19.815747] init: udev-fallback-graphics main process (552) terminated with status 1

[   20.187805] init: networking pre-start process (556) terminated with status 1

[   20.398738] init: networking post-stop process (574) terminated with status 100

[   46.778881] type=1400 audit(1398543305.844:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=649 comm="apparmor_parser"

[   46.778913] type=1400 audit(1398543305.844:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=649 comm="apparmor_parser"

[   46.779985] type=1400 audit(1398543305.844:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=649 comm="apparmor_parser"

[   47.448328] type=1400 audit(1398543306.516:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=660 comm="apparmor_parser"

[  138.770368] type=1400 audit(1398543397.836:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=723 comm="apparmor_parser"

[  138.770395] type=1400 audit(1398543397.836:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=723 comm="apparmor_parser"

[  138.771095] type=1400 audit(1398543397.836:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=723 comm="apparmor_parser"

[  138.782052] type=1400 audit(1398543397.848:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=724 comm="apparmor_parser"

[  138.782084] type=1400 audit(1398543397.848:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser"

[  138.782097] type=1400 audit(1398543397.848:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"

[  138.783232] type=1400 audit(1398543397.848:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser"

[  138.783253] type=1400 audit(1398543397.848:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"

[  138.783821] type=1400 audit(1398543397.848:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"

[  138.815769] type=1400 audit(1398543397.880:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=725 comm="apparmor_parser"

[  141.044684] init: networking pre-start process (840) terminated with status 1

[  141.861701] init: networking post-stop process (905) terminated with status 100

[  265.264153] usb 1-5: new high-speed USB device number 2 using ehci-pci

[  265.404697] usb 1-5: New USB device found, idVendor=0951, idProduct=1642

[  265.404709] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[  265.404715] usb 1-5: Product: DT 101 G2

[  265.404719] usb 1-5: Manufacturer: Kingston

[  265.404724] usb 1-5: SerialNumber: 001CC0EC32BCFCB0D7124AFD

[  265.710997] usb-storage 1-5:1.0: USB Mass Storage device detected

[  265.732929] scsi4 : usb-storage 1-5:1.0

[  265.740590] usbcore: registered new interface driver usb-storage

[  266.763062] scsi 4:0:0:0: Direct-Access     Kingston DT 101 G2        1.00 PQ: 0 ANSI: 4

[  266.771711] sd 4:0:0:0: Attached scsi generic sg2 type 0

[  266.772164] sd 4:0:0:0: [sdb] 7567964 512-byte logical blocks: (3.87 GB/3.60 GiB)

[  266.773308] sd 4:0:0:0: [sdb] Write Protect is off

[  266.773324] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00

[  266.774052] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA

[  266.779845]  sdb: sdb1

[  266.783333] sd 4:0:0:0: [sdb] Attached SCSI removable disk

[  281.625938] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

root@inseto-xubuntu:/home/inseto# ifconfig -a

eth0      Link encap:Ethernet  Endereço de HW ff:ff:ff:df:ff:ff  

          BROADCAST MULTICAST  MTU:1500  Métrica:1

          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:1000 

          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)



lo        Link encap:Loopback Local  

          inet end.: 127.0.0.1  Masc:255.0.0.0

          endereço inet6: ::1/128 Escopo:Máquina

          UP LOOPBACK RUNNING  MTU:65536  Métrica:1

          pacotes RX:180 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:180 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:0 

          RX bytes:12720 (12.7 KB) TX bytes:12720 (12.7 KB)



root@inseto-xubuntu:/home/inseto#