Ubuntu não reconhece celular [RESOLVIDO]

elaine8
(usa Ubuntu)

Enviado em 21/12/2010 - 20:48h

Olá Julio,segue a saída do comando:

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/host5/target5:0:0/5:0:0:0/block/sdb/sdb1':
KERNEL=="sdb1"
SUBSYSTEM=="block"
DRIVER==""
ATTR{partition}=="1"
ATTR{start}=="137"
ATTR{size}=="3838327"
ATTR{stat}==" 16 607 575 580 0 0 0 0 2 233688 281740"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/host5/target5:0:0/5:0:0:0/block/sdb':
KERNELS=="sdb"
SUBSYSTEMS=="block"
DRIVERS==""
ATTRS{range}=="16"
ATTRS{ext_range}=="256"
ATTRS{removable}=="1"
ATTRS{ro}=="0"
ATTRS{size}=="3842048"
ATTRS{capability}=="53"
ATTRS{stat}==" 27 646 975 186304 0 0 0 0 3 233836 515292"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/host5/target5:0:0/5:0:0:0':
KERNELS=="5:0:0:0"
SUBSYSTEMS=="scsi"
DRIVERS=="sd"
ATTRS{device_blocked}=="0"
ATTRS{type}=="0"
ATTRS{scsi_level}=="0"
ATTRS{vendor}=="USB Mass"
ATTRS{model}==" Storage Device "
ATTRS{rev}=="USB "
ATTRS{state}=="running"
ATTRS{timeout}=="30"
ATTRS{iocounterbits}=="32"
ATTRS{iorequest_cnt}=="0x41"
ATTRS{iodone_cnt}=="0x39"
ATTRS{ioerr_cnt}=="0x1"
ATTRS{modalias}=="scsi:t-0x00"
ATTRS{evt_media_change}=="0"
ATTRS{queue_depth}=="1"
ATTRS{queue_type}=="none"
ATTRS{max_sectors}=="240"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/host5/target5:0:0':
KERNELS=="target5:0:0"
SUBSYSTEMS=="scsi"
DRIVERS==""

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/host5':
KERNELS=="host5"
SUBSYSTEMS=="scsi"
DRIVERS==""

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0':
KERNELS=="4-1:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="usb-storage"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="08"
ATTRS{bInterfaceSubClass}=="06"
ATTRS{bInterfaceProtocol}=="50"
ATTRS{modalias}=="usb:v1004p6018d0100dc00dsc00dp00ic08isc06ip50"
ATTRS{supports_autosuspend}=="0"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1':
KERNELS=="4-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="80"
ATTRS{bMaxPower}=="500mA"
ATTRS{urbnum}=="502"
ATTRS{idVendor}=="1004"
ATTRS{idProduct}=="6018"
ATTRS{bcdDevice}=="0100"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="4"
ATTRS{devnum}=="3"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"

looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4':
KERNELS=="usb4"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="143"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="4"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.30-020630-generic uhci_hcd"
ATTRS{product}=="UHCI Host Controller"
ATTRS{serial}=="0000:00:10.2"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:10.2':
KERNELS=="0000:00:10.2"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{vendor}=="0x1106"
ATTRS{device}=="0x3038"
ATTRS{subsystem_vendor}=="0x1458"
ATTRS{subsystem_device}=="0x5004"
ATTRS{class}=="0x0c0300"
ATTRS{irq}=="21"
ATTRS{local_cpus}=="ff"
ATTRS{local_cpulist}=="0-7"
ATTRS{modalias}=="pci:v00001106d00003038sv00001458sd00005004bc0Csc03i00"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

Abrasssss!

julio_hoffimann
(usa Ubuntu)

Enviado em 22/12/2010 - 19:45h

Oi Elaine,

Cada dispositivo tem seus atributos (tamanho, marca, modelo, ...), iremos fazer com que o Linux reconheça o seu celular através deles. Para isso é preciso criar um arquivo que informe os atributos do seu LG:


1º PASSO
========

Como usuário root, crie um arquivo chamado 10-gs155.rules no diretório /etc/udev/rules.d/ Basta rodar os comandos abaixo:

$ su -
# nano /etc/udev/rules.d/10-gs155.rules

Escreva o seguinte conteúdo no arquivo que já estará aberto no nano:

# Regras para o meu celular LG gs155
KERNEL=="sd?1", SUBSYSTEM=="block", ATTR{size}=="3838327", NAME="gs155", MODE="0666"

Para salvar e sair, pressione: [Ctrl]+[x], [y], [Enter]

2º PASSO
========

Teoricamente está tudo resolvido. Para que as regras passem a valer, é necessário reiniciar a máquina ou rodar o seguinte comando ainda como root:

# udevadm control --reload-rules

Pode conectar o celular e conferir se está tudo OK. ;-)


Explicação final:
=================

Porque o nome 10-gs155.rules? O udev lê as regras naquele diretório em ordem lexicográfica, existem outras regras pré-definidas no sistema que geralmente começam com 70. O 10 é para garantir que a sua regra seja lida antes das do sistema, o restante do nome fica a seu critério, mas deve terminar com a extensão .rules

Qualquer problema retorne.

cassiosp
(usa Ubuntu)

Enviado em 30/09/2013 - 10:29h

Tentei todos os comandos que encopntrei na internet e nada do ubuntu reconhecer o Grand Duos , nem mesmo no W7 de um amigo..., resolvi fazer um teste ; tirei um chip e não deu outra funcionou corretamente. Espero que isso possa ajudar na solução de outros problemas mesmo sendo o smartphone de um só chip. Agora é com vocês que manjam do assunto...

meinhardt_jgbr
(usa Debian)

Enviado em 16/10/2014 - 17:38h

Tentei seguir as instruções abaixo, fornecidas pelo companheiro Winkler e ainda não foi agora que consigo acessar o meu cel LG:

quote

Melhor resposta

[2] Enviado em 19/12/2010 - 14:31h:
Re: Ubuntu não reconhece celular [RESOLVIDO]

Faça o seguinte

1- plugue seu celular no USB de seu computador

2- Abra o terminal e digite

$dmesg

3- no final deste comando vai apareceu para você os ultimos dispositivos conectados...no meu caso apareceu isso

sd 7:0:0:0: [sdf] Attached SCSI removable disk

4- O "sdf" é o meu device do celular no seu pode ser sdb, sdc, etc

4- digite este comando para montar seu dispositivo

$ mount /dev/sd? /mnt

experimente se caso não der certo, poste

unquote
---------------------
abaixo segue o conteudo do comando dmesg com o cel LG E475f plugado no cabo usb:

[ 2.220323] Uniform CD-ROM driver Revision: 3.20
[ 2.220443] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.226044] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 2.275574] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.276126] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 2.282151] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.283201] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.663125] usb 1-7: New USB device found, idVendor=5986, idProduct=0100
[ 2.663129] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.663133] usb 1-7: Product: USB2.0 Camera
[ 2.663249] usb 1-7: configuration #1 chosen from 1 choice
[ 2.912017] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.082384] usb 3-1: New USB device found, idVendor=058f, idProduct=9254
[ 3.082389] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.082394] usb 3-1: Product: Generic USB Hub
[ 3.082396] usb 3-1: Manufacturer: ALCOR
[ 3.082512] usb 3-1: configuration #1 chosen from 1 choice
[ 3.085444] hub 3-1:1.0: USB hub found
[ 3.087383] hub 3-1:1.0: 4 ports detected
[ 3.093246] kjournald starting. Commit interval 5 seconds
[ 3.093266] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.369391] usb 3-1.3: new full speed USB device using uhci_hcd and address 3
[ 3.503391] usb 3-1.3: New USB device found, idVendor=04e8, idProduct=3301
[ 3.503396] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.503399] usb 3-1.3: Product: ML-1660 Series
[ 3.503402] usb 3-1.3: Manufacturer: Samsung Electronics Co., Ltd.
[ 3.503405] usb 3-1.3: SerialNumber: Z5ASBDAZA00803W.
[ 3.503527] usb 3-1.3: configuration #1 chosen from 1 choice
[ 3.581395] usb 3-1.4: new low speed USB device using uhci_hcd and address 4
[ 3.717392] usb 3-1.4: New USB device found, idVendor=09da, idProduct=0006
[ 3.717397] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.717400] usb 3-1.4: Product: USB Optical Mouse
[ 3.717403] usb 3-1.4: Manufacturer: A4Tech
[ 3.717523] usb 3-1.4: configuration #1 chosen from 1 choice
[ 4.228041] udev[325]: starting version 164
[ 4.625833] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 4.629142] ACPI: SSDT 7f691dee 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 4.629929] ACPI: SSDT 7f6918b3 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 4.631468] Marking TSC unstable due to TSC halts in idle
[ 4.631611] processor LNXCPU:00: registered as cooling_device0
[ 4.632128] ACPI: SSDT 7f692026 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 4.632505] ACPI: SSDT 7f691d69 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 4.632778] Switching to clocksource hpet
[ 4.633341] processor LNXCPU:01: registered as cooling_device1
[ 4.693677] ACPI: WMI: Mapper loaded
[ 4.817456] cfg80211: Using static regulatory domain info
[ 4.817460] cfg80211: Regulatory domain: US
[ 4.817462] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.817466] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 4.817470] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.817473] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.817477] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.817481] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.817483] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 4.817493] cfg80211: Calling CRDA for country: US
[ 4.844577] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.845854] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 4.845925] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.999672] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 4.999843] ACPI: Lid Switch [LID]
[ 4.999921] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 4.999963] ACPI: Power Button [PWRB]
[ 5.006109] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 5.006251] ACPI: Sleep Button [SLPB]
[ 5.006375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.006455] ACPI: Power Button [PWRF]
[ 5.016340] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 5.036212] ACPI: AC Adapter [ACAD] (on-line)
[ 5.328344] usbcore: registered new interface driver hiddev
[ 5.328421] usbcore: registered new interface driver usbhid
[ 5.328426] usbhid: v2.6:USB HID core driver
[ 5.407853] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input7
[ 5.407986] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1.4/input0
[ 5.654692] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.724806] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0
[ 5.781725] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 5.850326] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2101
[ 5.850332] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.850335] usb 4-1: Product: Acer Module
[ 5.850337] usb 4-1: Manufacturer: Broadcom Corp
[ 5.850462] usb 4-1: configuration #1 chosen from 1 choice
[ 6.006819] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[ 6.006831] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.006846] ath5k 0000:03:00.0: setting latency timer to 64
[ 6.006884] ath5k 0000:03:00.0: registered as 'phy0'
[ 6.028660] Bluetooth: Core ver 2.15
[ 6.028724] NET: Registered protocol family 31
[ 6.028727] Bluetooth: HCI device and connection manager initialized
[ 6.028730] Bluetooth: HCI socket layer initialized
[ 6.031058] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.031065] ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf]
[ 6.031130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.516160] intel_rng: FWH not detected
[ 6.518414] ath: EEPROM regdomain: 0x65
[ 6.518417] ath: EEPROM indicates we should expect a direct regpair map
[ 6.518421] ath: Country alpha2 being used: 00
[ 6.518423] ath: Regpair used: 0x65
[ 6.754318] tifm_7xx1 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.776051] tifm_core: MMC/SD card detected in socket 0:1
[ 6.861744] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.862051] usbcore: registered new interface driver btusb
[ 6.886519] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0110]
[ 6.886546] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
[ 6.886549] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
[ 6.886556] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
[ 7.076756] [drm] Initialized drm 1.1.0 20060810
[ 7.080744] Linux video capture interface: v2.00
[ 7.090517] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301
[ 7.090544] usbcore: registered new interface driver usblp
[ 7.117233] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 7.117239] yenta_cardbus 0000:0a:09.0: Socket status: 30000006
[ 7.117243] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 7.117254] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 7.117259] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[ 7.117541] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[ 7.117545] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 7.127353] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[ 7.196655] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input9
[ 7.196726] usbcore: registered new interface driver uvcvideo
[ 7.196730] USB Video Class driver (v0.1.0)
[ 7.208127] phy0: Selected rate control algorithm 'minstrel'
[ 7.208914] Registered led device: ath5k-phy0::rx
[ 7.208934] Registered led device: ath5k-phy0::tx
[ 7.208938] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 7.243856] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.243864] i915 0000:00:02.0: setting latency timer to 64
[ 7.246644] [drm] set up 7M of stolen space
[ 7.349324] [drm] initialized overlay support
[ 8.306694] Console: switching to colour frame buffer device 160x50
[ 8.314135] fb0: inteldrmfb frame buffer device
[ 8.314137] registered panic notifier
[ 8.314152] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.314217] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.314260] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.433357] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 8.435413] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 8.436303] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.437022] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.437948] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.476467] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 9.375570] EXT3 FS on sda3, internal journal
[ 9.459967] loop: module loaded
[ 9.883571] kjournald starting. Commit interval 5 seconds
[ 9.884064] EXT3 FS on sda8, internal journal
[ 9.884070] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.413645] fuse init (API version 7.13)
[ 12.786548] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 13.944868] sky2 eth0: enabling interface
[ 13.945116] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.963263] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.442783] apm: BIOS not found.
[ 15.848366] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 15.848590] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.111813] Bluetooth: L2CAP ver 2.14
[ 16.111817] Bluetooth: L2CAP socket layer initialized
[ 16.125041] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.125045] Bluetooth: BNEP filters: protocol multicast
[ 16.131239] Bluetooth: RFCOMM TTY layer initialized
[ 16.131244] Bluetooth: RFCOMM socket layer initialized
[ 16.131247] Bluetooth: RFCOMM ver 1.11
[ 16.407544] Bridge firewalling registered
[ 16.574853] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.574857] Bluetooth: SCO socket layer initialized
[ 17.028102] lp: driver loaded but no devices found
[ 17.035778] ppdev: user-space parallel port driver
[ 17.048511] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[ 17.048518] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[ 17.048520] parport 0x378: You gave this address, but there is probably no parallel port there!
[ 17.048541] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 17.148272] lp0: using parport0 (interrupt-driven).
[ 20.109776] usb 3-1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 26.697452] eth0: no IPv6 routers present
[ 231.785107] usb 4-1: USB disconnect, address 2
[ 239.956108] pan1: no IPv6 routers present
[ 245.204113] pan0: no IPv6 routers present
[ 283.837443] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 537.049549] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1041.021482] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1259.012800] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1878.021470] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2049.020751] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2134.016752] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2248.016759] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2505.024762] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2790.024749] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3047.016767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3247.017535] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3332.020869] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3532.021475] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3703.016754] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3874.020759] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4159.020783] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4244.017480] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4483.020684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4739.020700] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4910.021156] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5052.023802] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5137.020548] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5251.017925] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5536.016403] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5650.021494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5735.023705] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5992.021448] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6219.017539] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6418.020760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6674.021475] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6845.024416] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7073.020820] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7358.021472] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7472.017452] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7614.020759] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7728.020771] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7870.021449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7984.020565] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8003.128167] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 8003.128180] usb 3-1: USB disconnect, address 2
[ 8003.128186] usb 3-1.3: USB disconnect, address 3
[ 8003.128507] usblp0: removed
[ 8003.128813] usb 3-1.4: USB disconnect, address 4
[ 8003.393058] usb 3-1: new full speed USB device using uhci_hcd and address 5
[ 8003.566455] usb 3-1: New USB device found, idVendor=058f, idProduct=9254
[ 8003.566460] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8003.566463] usb 3-1: Product: Generic USB Hub
[ 8003.566466] usb 3-1: Manufacturer: ALCOR
[ 8003.566608] usb 3-1: configuration #1 chosen from 1 choice
[ 8003.569524] hub 3-1:1.0: USB hub found
[ 8003.571446] hub 3-1:1.0: 4 ports detected
[ 8003.798447] hub 3-1:1.0: hub_port_status failed (err = -71)
[ 8003.799443] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.800443] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.801444] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.802443] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.802446] hub 3-1:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 8003.803443] hub 3-1:1.0: cannot disable port 3 (err = -71)
[ 8003.804441] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.805446] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.806442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.807443] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.808444] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.808447] hub 3-1:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 8003.809436] hub 3-1:1.0: cannot disable port 3 (err = -71)
[ 8003.810443] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.811442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.812442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.813442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.814442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.814445] hub 3-1:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 8003.815442] hub 3-1:1.0: cannot disable port 3 (err = -71)
[ 8003.816443] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.817444] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.818444] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.819442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.820442] hub 3-1:1.0: cannot reset port 3 (err = -71)
[ 8003.820445] hub 3-1:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 8003.821444] hub 3-1:1.0: cannot disable port 3 (err = -71)
[ 8003.821449] hub 3-1:1.0: unable to enumerate USB device on port 3
[ 8003.822442] hub 3-1:1.0: cannot disable port 3 (err = -71)
[ 8003.823443] hub 3-1:1.0: hub_port_status failed (err = -71)
[ 8003.872066] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 8003.872073] usb 3-1: USB disconnect, address 5
[ 8004.113044] usb 3-1: new full speed USB device using uhci_hcd and address 10
[ 8004.286449] usb 3-1: New USB device found, idVendor=058f, idProduct=9254
[ 8004.286454] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8004.286457] usb 3-1: Product: Generic USB Hub
[ 8004.286460] usb 3-1: Manufacturer: ALCOR
[ 8004.286602] usb 3-1: configuration #1 chosen from 1 choice
[ 8004.289521] hub 3-1:1.0: USB hub found
[ 8004.291445] hub 3-1:1.0: 4 ports detected
[ 8004.576080] usb 3-1.3: new full speed USB device using uhci_hcd and address 11
[ 8004.712449] usb 3-1.3: New USB device found, idVendor=04e8, idProduct=3301
[ 8004.712455] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8004.712458] usb 3-1.3: Product: ML-1660 Series
[ 8004.712461] usb 3-1.3: Manufacturer: Samsung Electronics Co., Ltd.
[ 8004.712464] usb 3-1.3: SerialNumber: Z5ASBDAZA00803W.
[ 8004.712610] usb 3-1.3: configuration #1 chosen from 1 choice
[ 8004.719543] usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301
[ 8004.798443] usb 3-1.4: new low speed USB device using uhci_hcd and address 12
[ 8004.947456] usb 3-1.4: New USB device found, idVendor=09da, idProduct=0006
[ 8004.947461] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8004.947465] usb 3-1.4: Product: USB Optical Mouse
[ 8004.947467] usb 3-1.4: Manufacturer: A4Tech
[ 8004.947612] usb 3-1.4: configuration #1 chosen from 1 choice
[ 8004.973822] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input12
[ 8004.973981] a4tech 0003:09DA:0006.0002: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1.4/input0
[ 8006.041985] usb 3-1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 8098.011435] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8412.015366] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8583.011495] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8926.019369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9097.024394] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9297.015517] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9440.012397] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9554.022641] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9868.015381] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10011.019346] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10211.015425] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10296.027904] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10410.023436] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10524.024410] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10638.016435] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10752.024392] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11208.052374] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11464.011370] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11578.019875] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11949.024534] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12008.580084] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[12008.580093] usb 3-1: USB disconnect, address 10
[12008.580096] usb 3-1.3: USB disconnect, address 11
[12008.580314] usblp0: removed
[12008.580497] usb 3-1.4: USB disconnect, address 12
[12008.856050] usb 3-1: new full speed USB device using uhci_hcd and address 13
[12009.029970] usb 3-1: New USB device found, idVendor=058f, idProduct=9254
[12009.029975] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12009.029979] usb 3-1: Product: Generic USB Hub
[12009.029981] usb 3-1: Manufacturer: ALCOR
[12009.030121] usb 3-1: configuration #1 chosen from 1 choice
[12009.033036] hub 3-1:1.0: USB hub found
[12009.034963] hub 3-1:1.0: 4 ports detected
[12009.325968] usb 3-1.3: new full speed USB device using uhci_hcd and address 14
[12009.466966] usb 3-1.3: New USB device found, idVendor=04e8, idProduct=3301
[12009.466971] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12009.466975] usb 3-1.3: Product: ML-1660 Series
[12009.466978] usb 3-1.3: Manufacturer: Samsung Electronics Co., Ltd.
[12009.466980] usb 3-1.3: SerialNumber: Z5ASBDAZA00803W.
[12009.467129] usb 3-1.3: configuration #1 chosen from 1 choice
[12009.475639] usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301
[12009.553967] usb 3-1.4: new low speed USB device using uhci_hcd and address 15
[12009.691956] usb 3-1.4: New USB device found, idVendor=09da, idProduct=0006
[12009.691962] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12009.691965] usb 3-1.4: Product: USB Optical Mouse
[12009.691968] usb 3-1.4: Manufacturer: A4Tech
[12009.692155] usb 3-1.4: configuration #1 chosen from 1 choice
[12009.718380] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input13
[12009.718545] a4tech 0003:09DA:0006.0003: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1.4/input0
[12010.798642] usb 3-1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[12206.016443] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12292.023784] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12549.023745] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12634.015365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12748.016381] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12976.016402] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13318.044831] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13394.236045] usb 2-2: new full speed USB device using uhci_hcd and address 2
[13394.404564] usb 2-2: New USB device found, idVendor=163c, idProduct=0407
[13394.404569] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[13394.404573] usb 2-2: Product: USB Key
[13394.404575] usb 2-2: Manufacturer: Watchdata
[13394.404727] usb 2-2: configuration #1 chosen from 1 choice
[13394.447372] usbcore: registered new interface driver WatchToken(2.6)
[13394.475051] Initializing USB Mass Storage driver...
[13394.475211] scsi2 : SCSI emulation for USB Mass Storage devices
[13394.475395] usbcore: registered new interface driver usb-storage
[13394.475398] USB Mass Storage support registered.
[13394.482099] usb-storage: device found at 2
[13394.482103] usb-storage: waiting for device to settle before scanning
[13399.489034] usb-storage: device scan complete
[13399.494488] scsi 2:0:0:0: CD-ROM Watch CD-ROM 1.00 PQ: 0 ANSI: 5
[13399.518461] sr1: scsi3-mmc drive: 0x/0x caddy
[13399.518631] sr 2:0:0:0: Attached scsi CD-ROM sr1
[13399.518733] sr 2:0:0:0: Attached scsi generic sg2 type 5
[13400.098487] ISO 9660 Extensions: Microsoft Joliet Level 3
[13400.141480] ISOFS: changing to secondary root
[13461.015805] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13546.019365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13687.020399] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13856.011435] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14282.012387] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14538.015365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14652.020349] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14851.019351] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15248.015442] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15390.015386] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15647.015429] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15761.019367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15875.015473] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16046.015384] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16132.011389] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16274.027634] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16388.027767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16930.015433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17101.015386] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17415.019431] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17500.019440] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18127.017559] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18298.031367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18469.015350] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18583.019405] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18982.019463] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19295.015472] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19409.024365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19523.016395] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19779.019340] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20235.020411] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20349.023365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20805.015382] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20919.023464] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[21261.011365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[21346.020208] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[21574.019406] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22142.027396] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22284.028431] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22426.024777] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22511.027341] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22909.024487] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23023.019389] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23222.027460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23393.021058] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23450.015374] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23621.019376] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23763.023378] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23877.031394] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24048.024335] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24162.023370] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24276.023520] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24618.015357] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24930.016513] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25211.023515] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25238.632076] usb 2-2: USB disconnect, address 2
[25271.752042] usb 1-2: new high speed USB device using ehci_hcd and address 6
[25271.885018] usb 1-2: New USB device found, idVendor=1004, idProduct=91c8
[25271.885023] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[25271.885027] usb 1-2: Product: LG-E475f
[25271.885030] usb 1-2: Manufacturer: LGE
[25271.885032] usb 1-2: SerialNumber: LGOTMS1a3d2f1
[25271.885179] usb 1-2: configuration #1 chosen from 1 choice
[25271.892424] scsi3 : SCSI emulation for USB Mass Storage devices
[25271.901118] usb-storage: device found at 6
[25271.901122] usb-storage: waiting for device to settle before scanning
[25276.909028] usb-storage: device scan complete
[25276.909548] scsi 3:0:0:0: CD-ROM LGE CDROM storage 0000 PQ: 0 ANSI: 2
[25277.016543] sr1: scsi-1 drive
[25277.016719] sr 3:0:0:0: Attached scsi CD-ROM sr1
[25277.016825] sr 3:0:0:0: Attached scsi generic sg2 type 5
[25282.823196] usb 1-2: USB disconnect, address 6
[25283.105034] usb 1-2: new high speed USB device using ehci_hcd and address 7
[25283.236891] usb 1-2: New USB device found, idVendor=1004, idProduct=631c
[25283.236896] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[25283.236900] usb 1-2: Product: LG-E475f
[25283.236902] usb 1-2: Manufacturer: LGE
[25283.236905] usb 1-2: SerialNumber: LGOTMS1a3d2f1
[25283.237053] usb 1-2: configuration #1 chosen from 1 choice
[25296.015990] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25410.019369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25524.019573] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25638.019372] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25920.015418] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[26034.016365] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[26148.023555] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[26262.011379] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[26376.012431] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[26747.015369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[27004.011602] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[27517.019376] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[27659.015356] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[27773.015381] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[27859.015399] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[28228.016504] ADDRCONF(NETDEV_UP): wlan0: link is not ready
jgm-db6@debian:~$


----------------------------

Tentei montar como root (#) o LG E475f que aparece no mdmesg, como usb 1-2 e como sr3 e sr1 sem sucesso. Vou fazer nova tentativa de montagem, agora como scsi3 para ver se funciona. Também não funcionou.

bakulasulai
(usa Outra)

Enviado em 17/11/2014 - 08:12h

Pessoal,

Mesmo problema com LG80. A saída do "dmesg" é...

[ 1103.646929] usb 2-1.6: new high speed USB device using ehci_hcd and address 9
[ 1103.740598] usb 2-1.6: configuration #1 chosen from 1 choice


Não tem nenhum "SD"

E agora?

Abraço.

Bakula Sulai.

robertborges
(usa Big Linux)

Enviado em 13/03/2015 - 18:40h

estou com o mesmo poblema, porem oque foi ensinado acima não deu nada certo

Ignorante
(usa Slackware)

Enviado em 14/03/2015 - 08:22h

Quando colocam o celular no windows, vocês não tem que ativar a função armazenamento para PC do celular? pode ser isso que ocorre.

att

zambarda
(usa Ubuntu)

Enviado em 02/08/2015 - 23:48h

RobertBorges

Este problema é muito fácil solucionar, basta seguir os passos abaixo.

Abra o terminal digitando crtl alt t

copie e cole o que segue abaixo:

sudo gedit /etc/usb_modeswitch.conf

procure a linha abaixo:

DisableSwitching=0

mude o 0 final para 1 e salve.

pronto!